| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 19 Nov 2018 10:01:05 +0900
From: Sugaya Taichi <sugaya.taichi@...ionext.com>
To: linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-serial@...r.kernel.org
Cc: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>,
Russell King <linux@...linux.org.uk>,
Jiri Slaby <jslaby@...e.com>,
Masami Hiramatsu <masami.hiramatsu@...aro.org>,
Jassi Brar <jaswinder.singh@...aro.org>,
Sugaya Taichi <sugaya.taichi@...ionext.com>
Subject: [PATCH 00/14] Add basic support for Socionext Milbeaut M10V SoCs
Hi,
Here is the series of patches the initial support for SC2000(M10V) of
Milbeaut SoCs. "M10V" is the internal name of SC2000, so commonly used in
source code.
SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for
computer vision. It also features advanced functionalities such as 360-degree,
real-time spherical stitching with multi cameras, image stabilization for
without mechanical gimbals, and rolling shutter correction. More detail is
below:
https://www.socionext.com/en/products/assp/milbeaut/SC2000.html
Specifications for developers are below:
- Quad-core 32bit Cortex-A7 on ARMv7-A architecture
- NEON support
- DSP
- GPU
- MAX 3GB DDR3
- Cortex-M0 for power control
- NAND Flash Interface
- SD UHS-I
- SD UHS-II
- SDIO
- USB2.0 HOST / Device
- USB3.0 HOST / Device
- PCI express Gen2
- Ethernet Engine
- I2C
- UART
- SPI
- PWM
Support is quite minimal for now, since it only includes timer, clock,
pictrl and serial controller drivers, so we can only boot to userspace
through initramfs. Support for the other peripherals will come eventually.
Sugaya Taichi (14):
ARM: milbeaut: Add basic support for Milbeaut m10v SoC
dt-bindings: soc: milbeaut: Add Milbeaut trampoline description
ARM: milbeaut: Add Milbeaut M10V early printk
dt-bindings: timer: Add Milbeaut M10V timer description
clocksource/drivers/timer-milbeaut: Add Milbeaut M10V timer
dt-bindings: clock: milbeaut: add Milbeaut clock description
clock: milbeaut: Add Milbeaut M10V clock control
dt-bindings: serial: Add Milbeaut M10V serial description
serial: Add Milbeaut M10V serial control
dt-bindings: pinctrl: milbeaut: Add Milbeaut M10V pinctrl description
pinctrl: milbeaut: Add Milbeaut M10V pinctrl
ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board
ARM: configs: Add Milbeaut M10V defconfig
MAINTAINERS: Add entry to MAINTAINERS for Milbeaut
.../devicetree/bindings/clock/milbeaut-clock.txt | 93 +++
.../pinctrl/socionext,milbeaut-pinctrl.txt | 33 +
.../devicetree/bindings/serial/milbeaut-uart.txt | 23 +
.../bindings/soc/socionext/socionext,m10v.txt | 12 +
.../bindings/timer/socionext,milbeaut-timer.txt | 17 +
MAINTAINERS | 9 +
arch/arm/Kconfig | 2 +
arch/arm/Kconfig.debug | 12 +-
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/milbeaut-m10v-evb.dts | 35 +
arch/arm/boot/dts/milbeaut-m10v-evb.dtsi | 17 +
arch/arm/boot/dts/milbeaut-m10v.dtsi | 510 ++++++++++++++
arch/arm/configs/milbeaut_m10v_defconfig | 364 ++++++++++
arch/arm/include/debug/milbeaut.S | 25 +
arch/arm/mach-milbeaut/Kconfig | 28 +
arch/arm/mach-milbeaut/Makefile | 3 +
arch/arm/mach-milbeaut/m10v_evb.c | 31 +
arch/arm/mach-milbeaut/platsmp.c | 157 +++++
drivers/clk/Makefile | 1 +
drivers/clk/clk-m10v.c | 671 ++++++++++++++++++
drivers/clocksource/Kconfig | 8 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-m10v.c | 146 ++++
drivers/pinctrl/Kconfig | 9 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-m10v.c | 765 +++++++++++++++++++++
drivers/tty/serial/Kconfig | 24 +
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/m10v_usio.c | 605 ++++++++++++++++
include/uapi/linux/serial_core.h | 3 +
31 files changed, 3606 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/milbeaut-clock.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/socionext,milbeaut-pinctrl.txt
create mode 100644 Documentation/devicetree/bindings/serial/milbeaut-uart.txt
create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,m10v.txt
create mode 100644 Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt
create mode 100644 arch/arm/boot/dts/milbeaut-m10v-evb.dts
create mode 100644 arch/arm/boot/dts/milbeaut-m10v-evb.dtsi
create mode 100644 arch/arm/boot/dts/milbeaut-m10v.dtsi
create mode 100644 arch/arm/configs/milbeaut_m10v_defconfig
create mode 100644 arch/arm/include/debug/milbeaut.S
create mode 100644 arch/arm/mach-milbeaut/Kconfig
create mode 100644 arch/arm/mach-milbeaut/Makefile
create mode 100644 arch/arm/mach-milbeaut/m10v_evb.c
create mode 100644 arch/arm/mach-milbeaut/platsmp.c
create mode 100644 drivers/clk/clk-m10v.c
create mode 100644 drivers/clocksource/timer-m10v.c
create mode 100644 drivers/pinctrl/pinctrl-m10v.c
create mode 100644 drivers/tty/serial/m10v_usio.c
--
1.9.1
Powered by blists - more mailing lists