[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1542589274-13878-9-git-send-email-sugaya.taichi@socionext.com>
Date: Mon, 19 Nov 2018 10:01:13 +0900
From: Sugaya Taichi <sugaya.taichi@...ionext.com>
To: linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-serial@...r.kernel.org
Cc: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>,
Russell King <linux@...linux.org.uk>,
Jiri Slaby <jslaby@...e.com>,
Masami Hiramatsu <masami.hiramatsu@...aro.org>,
Jassi Brar <jaswinder.singh@...aro.org>,
Sugaya Taichi <sugaya.taichi@...ionext.com>
Subject: [PATCH 08/14] dt-bindings: serial: Add Milbeaut M10V serial description
Add DT bindings document for Milbeaut M10V serial.
Signed-off-by: Sugaya Taichi <sugaya.taichi@...ionext.com>
---
.../devicetree/bindings/serial/milbeaut-uart.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/milbeaut-uart.txt
diff --git a/Documentation/devicetree/bindings/serial/milbeaut-uart.txt b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
new file mode 100644
index 0000000..19d1480
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
@@ -0,0 +1,23 @@
+Socionext Milbeaut UART controller
+
+Required properties:
+- index: must be 0
+- compatible: should be "socionext,milbeaut-m10v-usio-uart".
+- reg: offset and length of the register set for the device.
+- interrupts: two interrupts specifier.
+- clocks: phandle to the input clock.
+- interrupt-names: should be "rx", "tx".
+
+Optional properties:
+- uart-flow-enable: flow control enable.
+
+Example:
+ usio1: usio_uart@...00010 {
+ index = <0>;
+ compatible = "socionext,milbeaut-m10v-usio-uart";
+ reg = <0x1e700010 0x10>;
+ interrupts = <0 141 0x4>, <0 149 0x4>;
+ interrupt-names = "rx", "tx";
+ clocks = <&hclk>;
+ uart-flow-enable;
+ };
--
1.9.1
Powered by blists - more mailing lists