| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f1235661-f8f2-9885-1e7f-491f5c234078@axentia.se>
Date: Mon, 19 Nov 2018 21:16:12 +0000
From: Peter Rosin <peda@...ntia.se>
To: Guenter Roeck <linux@...ck-us.net>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Jean Delvare <jdelvare@...e.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
"linux-hwmon@...r.kernel.org" <linux-hwmon@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
Subject: Re: [PATCH 2/2] hwmon: (ntc_thermistor): add support for B57891S0103
from Epcos
On 2018-11-19 18:07, Guenter Roeck wrote:
> On Sat, Nov 17, 2018 at 12:13:00PM +0000, Peter Rosin wrote:
>> More of the same...
>>
>> Signed-off-by: Peter Rosin <peda@...ntia.se>
>> ---
>> drivers/hwmon/Kconfig | 3 +-
>> drivers/hwmon/ntc_thermistor.c | 57 +++++++++++++++++++++++++++-
>> include/linux/platform_data/ntc_thermistor.h | 1 +
>> 3 files changed, 58 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
>> index f10840ad465c..5438cecace22 100644
>> --- a/drivers/hwmon/Kconfig
>> +++ b/drivers/hwmon/Kconfig
>> @@ -1206,7 +1206,8 @@ config SENSORS_NTC_THERMISTOR
>>
>> Currently, this driver supports
>> NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,
>> - NCP03WF104 and NCP15XH103 from Murata and B57330V2103 from EPCOS.
>> + NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and
>> + B57891S0103 from EPCOS.
>>
>> This driver can also be built as a module. If so, the module
>> will be called ntc-thermistor.
>> diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
>> index c52d07c6b49f..e0c6b2f244a6 100644
>> --- a/drivers/hwmon/ntc_thermistor.c
>> +++ b/drivers/hwmon/ntc_thermistor.c
>> @@ -55,6 +55,7 @@ static const struct platform_device_id ntc_thermistor_id[] = {
>> { "b57330v2103", TYPE_B57330V2103},
>> { "ncp03wf104", TYPE_NCPXXWF104 },
>> { "ncp15xh103", TYPE_NCPXXXH103 },
>> + { "b57891s0103", TYPE_B57891S0103 },
>> { },
>> };
>>
>> @@ -212,8 +213,8 @@ static const struct ntc_compensation ncpXXxh103[] = {
>> };
>>
>> /*
>> - * The following compensation table is from the specification of EPCOS NTC
>> - * Thermistors Datasheet
>> + * The following compensation tables are from the specifications in EPCOS NTC
>> + * Thermistors Datasheets
>> */
>> static const struct ntc_compensation b57330v2103[] = {
>> { .temp_c = -40, .ohm = 190030 },
>> @@ -252,6 +253,52 @@ static const struct ntc_compensation b57330v2103[] = {
>> { .temp_c = 125, .ohm = 531 },
>> };
>>
>> +static const struct ntc_compensation b57891s0103[] = {
>> + { .temp_c = -55.0, .ohm = 878900 },
>> + { .temp_c = -50.0, .ohm = 617590 },
>> + { .temp_c = -45.0, .ohm = 439340 },
>> + { .temp_c = -40.0, .ohm = 316180 },
>> + { .temp_c = -35.0, .ohm = 230060 },
>> + { .temp_c = -30.0, .ohm = 169150 },
>> + { .temp_c = -25.0, .ohm = 125550 },
>> + { .temp_c = -20.0, .ohm = 94143 },
>> + { .temp_c = -15.0, .ohm = 71172 },
>> + { .temp_c = -10.0, .ohm = 54308 },
>> + { .temp_c = -5.0, .ohm = 41505 },
>> + { .temp_c = 0.0, .ohm = 32014 },
>> + { .temp_c = 5.0, .ohm = 25011 },
>> + { .temp_c = 10.0, .ohm = 19691 },
>> + { .temp_c = 15.0, .ohm = 15618 },
>> + { .temp_c = 20.0, .ohm = 12474 },
>> + { .temp_c = 25.0, .ohm = 10000 },
>> + { .temp_c = 30.0, .ohm = 8080 },
>> + { .temp_c = 35.0, .ohm = 6569 },
>> + { .temp_c = 40.0, .ohm = 5372 },
>> + { .temp_c = 45.0, .ohm = 4424 },
>> + { .temp_c = 50.0, .ohm = 3661 },
>> + { .temp_c = 55.0, .ohm = 3039 },
>> + { .temp_c = 60.0, .ohm = 2536 },
>> + { .temp_c = 65.0, .ohm = 2128 },
>> + { .temp_c = 70.0, .ohm = 1794 },
>> + { .temp_c = 75.0, .ohm = 1518 },
>> + { .temp_c = 80.0, .ohm = 1290 },
>> + { .temp_c = 85.0, .ohm = 1100 },
>> + { .temp_c = 90.0, .ohm = 942 },
>> + { .temp_c = 95.0, .ohm = 809 },
>> + { .temp_c = 100.0, .ohm = 697 },
>> + { .temp_c = 105.0, .ohm = 604 },
>> + { .temp_c = 110.0, .ohm = 525 },
>> + { .temp_c = 115.0, .ohm = 457 },
>> + { .temp_c = 120.0, .ohm = 400 },
>> + { .temp_c = 125.0, .ohm = 351 },
>> + { .temp_c = 130.0, .ohm = 308 },
>> + { .temp_c = 135.0, .ohm = 272 },
>> + { .temp_c = 140.0, .ohm = 240 },
>> + { .temp_c = 145.0, .ohm = 213 },
>> + { .temp_c = 150.0, .ohm = 189 },
>> + { .temp_c = 155.0, .ohm = 168 },
>> +};
>> +
>> struct ntc_data {
>> struct ntc_thermistor_platform_data *pdata;
>> const struct ntc_compensation *comp;
>> @@ -296,6 +343,8 @@ static const struct of_device_id ntc_match[] = {
>> .data = &ntc_thermistor_id[6] },
>> { .compatible = "murata,ncp15xh103",
>> .data = &ntc_thermistor_id[7] },
>> + { .compatible = "epcos,b57891s0103",
>> + .data = &ntc_thermistor_id[8] },
>>
>> /* Usage of vendor name "ntc" is deprecated */
>> { .compatible = "ntc,ncp15wb473",
>> @@ -627,6 +676,10 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
>> data->comp = ncpXXxh103;
>> data->n_comp = ARRAY_SIZE(ncpXXxh103);
>> break;
>> + case TYPE_B57891S0103:
>> + data->comp = b57891s0103;
>> + data->n_comp = ARRAY_SIZE(b57891s0103);
>> + break;
>> default:
>> dev_err(dev, "Unknown device type: %lu(%s)\n",
>> pdev_id->driver_data, pdev_id->name);
>> diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h
>> index 698d0d59db76..231a27c302ec 100644
>> --- a/include/linux/platform_data/ntc_thermistor.h
>> +++ b/include/linux/platform_data/ntc_thermistor.h
>> @@ -29,6 +29,7 @@ enum ntc_thermistor_type {
>> TYPE_B57330V2103,
>> TYPE_NCPXXWF104,
>> TYPE_NCPXXXH103,
>> + TYPE_B57891S0103,
>
> Guess I deserve the non-alphabetic order as penalty for not enforcing it
> earlier. I'll accept the patch after DT approval and submit another one
> myself afterwards to restore alphabetic order.
Right, I'm thinking another good change would be to introduce an enum
into the ntc_thermistor_id array, because the hard-coded numbering in
the ntc_match variable is a bit fragile in my taste, and that list would
also benefit from being alphabetic. Currently there's simply no way to
add things in the middle without causing mayhem. I thought about doing
that, but didn't want to waste energy doing it up front without knowing
if it would be well received (the driver might have been superseded or
something). I'm glad that you have volunteered to clean things up.
Ha! :-)
Cheers,
Peter
> Guenter
>
>> };
>>
>> struct ntc_thermistor_platform_data {
>> --
>> 2.11.0
>>
Powered by blists - more mailing lists