| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <de388271-e8f8-bb57-8efa-99938468ffb6@ti.com>
Date: Mon, 19 Nov 2018 16:42:54 -0600
From: Grygorii Strashko <grygorii.strashko@...com>
To: Russell King - ARM Linux <linux@...linux.org.uk>,
Maxime Chevallier <maxime.chevallier@...tlin.com>,
Antoine Tenart <antoine.tenart@...e-electrons.com>
CC: "David S. Miller" <davem@...emloft.net>,
Kishon Vijay Abraham I <kishon@...com>,
<netdev@...r.kernel.org>, Sekhar Nori <nsekhar@...com>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Tony Lindgren <tony@...mide.com>,
<linux-amlogic@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Antoine Tenart <antoine.tenart@...e-electrons.com>,
Quentin Schulz <quentin.schulz@...tlin.com>,
Vivek Gautam <vivek.gautam@...eaurora.org>,
Maxime Ripard <maxime.ripard@...tlin.com>,
Chen-Yu Tsai <wens@...e.org>, Carlo Caione <carlo@...one.org>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Manu Gautam <mgautam@...eaurora.org>
Subject: Re: [PATCH v2 4/5] phy: mvebu-cp110-comphy: convert to use eth phy
mode and submode
Hi Russell,
On 11/19/18 11:07 AM, Russell King - ARM Linux wrote:
> On Fri, Nov 09, 2018 at 05:47:54PM -0600, Grygorii Strashko wrote:
>> Convert mvebu-cp110-comphy PHY driver to use recently introduced
>> PHY_MODE_ETHERNET and phy_set_mode_ext().
>>
>> Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
>> ---
>> drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 19 +-----
>> drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 83 ++++++++++++++-----------
>> 2 files changed, 48 insertions(+), 54 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
>> index 7a37a37..731793a 100644
>> --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
>> +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
>> @@ -1165,28 +1165,13 @@ static void mvpp22_gop_setup_irq(struct mvpp2_port *port)
>> */
>> static int mvpp22_comphy_init(struct mvpp2_port *port)
>> {
>> - enum phy_mode mode;
>> int ret;
>>
>> if (!port->comphy)
>> return 0;
>>
>> - switch (port->phy_interface) {
>> - case PHY_INTERFACE_MODE_SGMII:
>> - case PHY_INTERFACE_MODE_1000BASEX:
>> - mode = PHY_MODE_SGMII;
>> - break;
>> - case PHY_INTERFACE_MODE_2500BASEX:
>> - mode = PHY_MODE_2500SGMII;
>> - break;
>> - case PHY_INTERFACE_MODE_10GKR:
>> - mode = PHY_MODE_10GKR;
>> - break;
>> - default:
>> - return -EINVAL;
>> - }
>> -
>> - ret = phy_set_mode(port->comphy, mode);
>> + ret = phy_set_mode_ext(port->comphy, PHY_MODE_ETHERNET,
>> + port->phy_interface);
>> if (ret)
>> return ret;
>>
>> diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
>> index 79b52c3..7dee72b 100644
>> --- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
>> +++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
>> @@ -9,6 +9,7 @@
>> #include <linux/iopoll.h>
>> #include <linux/mfd/syscon.h>
>> #include <linux/module.h>
>> +#include <linux/phy.h>
>> #include <linux/phy/phy.h>
>> #include <linux/platform_device.h>
>> #include <linux/regmap.h>
>> @@ -131,26 +132,26 @@ struct mvebu_comhy_conf {
>>
>> static const struct mvebu_comhy_conf mvebu_comphy_cp110_modes[] = {
>> /* lane 0 */
>> - MVEBU_COMPHY_CONF(0, 1, PHY_MODE_SGMII, 0x1),
>> - MVEBU_COMPHY_CONF(0, 1, PHY_MODE_2500SGMII, 0x1),
>> + MVEBU_COMPHY_CONF(0, 1, PHY_INTERFACE_MODE_SGMII, 0x1),
>> + MVEBU_COMPHY_CONF(0, 1, PHY_INTERFACE_MODE_2500BASEX, 0x1),
>> /* lane 1 */
>> - MVEBU_COMPHY_CONF(1, 2, PHY_MODE_SGMII, 0x1),
>> - MVEBU_COMPHY_CONF(1, 2, PHY_MODE_2500SGMII, 0x1),
>> + MVEBU_COMPHY_CONF(1, 2, PHY_INTERFACE_MODE_SGMII, 0x1),
>> + MVEBU_COMPHY_CONF(1, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1),
>> /* lane 2 */
>> - MVEBU_COMPHY_CONF(2, 0, PHY_MODE_SGMII, 0x1),
>> - MVEBU_COMPHY_CONF(2, 0, PHY_MODE_2500SGMII, 0x1),
>> - MVEBU_COMPHY_CONF(2, 0, PHY_MODE_10GKR, 0x1),
>> + MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_SGMII, 0x1),
>> + MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_2500BASEX, 0x1),
>> + MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_10GKR, 0x1),
>> /* lane 3 */
>> - MVEBU_COMPHY_CONF(3, 1, PHY_MODE_SGMII, 0x2),
>> - MVEBU_COMPHY_CONF(3, 1, PHY_MODE_2500SGMII, 0x2),
>> + MVEBU_COMPHY_CONF(3, 1, PHY_INTERFACE_MODE_SGMII, 0x2),
>> + MVEBU_COMPHY_CONF(3, 1, PHY_INTERFACE_MODE_2500BASEX, 0x2),
>> /* lane 4 */
>> - MVEBU_COMPHY_CONF(4, 0, PHY_MODE_SGMII, 0x2),
>> - MVEBU_COMPHY_CONF(4, 0, PHY_MODE_2500SGMII, 0x2),
>> - MVEBU_COMPHY_CONF(4, 0, PHY_MODE_10GKR, 0x2),
>> - MVEBU_COMPHY_CONF(4, 1, PHY_MODE_SGMII, 0x1),
>> + MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_SGMII, 0x2),
>> + MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_2500BASEX, 0x2),
>> + MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_10GKR, 0x2),
>> + MVEBU_COMPHY_CONF(4, 1, PHY_INTERFACE_MODE_SGMII, 0x1),
>> /* lane 5 */
>> - MVEBU_COMPHY_CONF(5, 2, PHY_MODE_SGMII, 0x1),
>> - MVEBU_COMPHY_CONF(5, 2, PHY_MODE_2500SGMII, 0x1),
>> + MVEBU_COMPHY_CONF(5, 2, PHY_INTERFACE_MODE_SGMII, 0x1),
>> + MVEBU_COMPHY_CONF(5, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1),
>> };
>>
>> struct mvebu_comphy_priv {
>> @@ -163,10 +164,12 @@ struct mvebu_comphy_lane {
>> struct mvebu_comphy_priv *priv;
>> unsigned id;
>> enum phy_mode mode;
>> + int submode;
>> int port;
>> };
>>
>> -static int mvebu_comphy_get_mux(int lane, int port, enum phy_mode mode)
>> +static int mvebu_comphy_get_mux(int lane, int port,
>> + enum phy_mode mode, int submode)
>> {
>> int i, n = ARRAY_SIZE(mvebu_comphy_cp110_modes);
>>
>> @@ -177,7 +180,7 @@ static int mvebu_comphy_get_mux(int lane, int port, enum phy_mode mode)
>> for (i = 0; i < n; i++) {
>> if (mvebu_comphy_cp110_modes[i].lane == lane &&
>> mvebu_comphy_cp110_modes[i].port == port &&
>> - mvebu_comphy_cp110_modes[i].mode == mode)
>> + mvebu_comphy_cp110_modes[i].mode == submode)
>
> This looks like it could be a future source of problems, since we
> have both a "mode" and a "submode". Is there any reason not to
> rename mvebu_comphy_cp110_modes's .mode member to be .submode ?
>
Thank you for review. I seems need to update it same way as requested
for ocelot-serdes by Quentin Schulz and add pair mode + submode handling
where needed. Will update and re-send.
--
regards,
-grygorii
Powered by blists - more mailing lists