| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20181119102528.2830-4-dev@pschenker.ch>
Date: Mon, 19 Nov 2018 11:25:28 +0100
From: Philippe Schenker <dev@...henker.ch>
To: jic23@...nel.org, marcel.ziswiler@...adex.com, stefan@...er.ch
Cc: Philippe Schenker <philippe.schenker@...adex.com>,
Fabio Estevam <fabio.estevam@....com>,
devicetree@...r.kernel.org,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
linux-kernel@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org, linux-tegra@...r.kernel.org,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Mark Rutland <mark.rutland@....com>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>,
NXP Linux Team <linux-imx@....com>
Subject: [PATCH v2 4/4] ARM: dts: Add stmpe-adc driver to relevant devicetrees
From: Philippe Schenker <philippe.schenker@...adex.com>
Activate the stmpe-adc driver as found on Apalis/Colibri iMX6/T30 modules
Signed-off-by: Philippe Schenker <philippe.schenker@...adex.com>
---
Changes in v2:
- Put common ADC settings in mfd
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 22 ++++++++++++++--------
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 23 +++++++++++++++--------
arch/arm/boot/dts/tegra30-apalis.dtsi | 22 ++++++++++++++--------
arch/arm/boot/dts/tegra30-colibri.dtsi | 22 ++++++++++++++--------
4 files changed, 57 insertions(+), 32 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 3dc99dd8dde1..8db476d8978d 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -331,11 +331,18 @@
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
+ /* forbid to use ADC channels 3-0 (touch) */
stmpe_touchscreen {
compatible = "st,stmpe-ts";
- /* 3.25 MHz ADC clock speed */
- st,adc-freq = <1>;
/* 8 sample average control */
st,ave-ctrl = <3>;
/* 7 length fractional part in z */
@@ -345,17 +352,16 @@
* current limit value
*/
st,i-drive = <1>;
- /* 12-bit ADC */
- st,mod-12b = <1>;
- /* internal ADC reference */
- st,ref-sel = <0>;
- /* ADC converstion time: 80 clocks */
- st,sample-time = <4>;
/* 1 ms panel driver settling time */
st,settling = <3>;
/* 5 ms touch detect interrupt delay */
st,touch-det-delay = <5>;
};
+
+ stmpe_adc {
+ compatible = "st,stmpe-adc";
+ st,norequest-mask = <0x0F>;
+ };
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 87e15e7cb32b..2e303d79c7f8 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -262,11 +262,18 @@
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
+ /* forbid to use ADC channels 3-0 (touch) */
stmpe_touchscreen {
compatible = "st,stmpe-ts";
- /* 3.25 MHz ADC clock speed */
- st,adc-freq = <1>;
/* 8 sample average control */
st,ave-ctrl = <3>;
/* 7 length fractional part in z */
@@ -276,17 +283,17 @@
* current limit value
*/
st,i-drive = <1>;
- /* 12-bit ADC */
- st,mod-12b = <1>;
- /* internal ADC reference */
- st,ref-sel = <0>;
- /* ADC converstion time: 80 clocks */
- st,sample-time = <4>;
/* 1 ms panel driver settling time */
st,settling = <3>;
/* 5 ms touch detect interrupt delay */
st,touch-det-delay = <5>;
};
+
+ stmpe_adc {
+ compatible = "st,stmpe-adc";
+ /* 3.25 MHz ADC clock speed */
+ st,norequest-mask = <0x0F>;
+ };
};
};
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 7f112f192fe9..850b0d13549a 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -976,11 +976,18 @@
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
+ /* forbid to use ADC channels 3-0 (touch) */
stmpe_touchscreen {
compatible = "st,stmpe-ts";
- /* 3.25 MHz ADC clock speed */
- st,adc-freq = <1>;
/* 8 sample average control */
st,ave-ctrl = <3>;
/* 7 length fractional part in z */
@@ -990,17 +997,16 @@
* current limit value
*/
st,i-drive = <1>;
- /* 12-bit ADC */
- st,mod-12b = <1>;
- /* internal ADC reference */
- st,ref-sel = <0>;
- /* ADC converstion time: 80 clocks */
- st,sample-time = <4>;
/* 1 ms panel driver settling time */
st,settling = <3>;
/* 5 ms touch detect interrupt delay */
st,touch-det-delay = <5>;
};
+
+ stmpe_adc {
+ compatible = "st,stmpe-adc";
+ st,norequest-mask = <0x0F>;
+ };
};
/*
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 35af03ca9e90..1f9198bb24ff 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -845,11 +845,18 @@
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
+ /* forbid to use ADC channels 3-0 (touch) */
stmpe_touchscreen {
compatible = "st,stmpe-ts";
- /* 3.25 MHz ADC clock speed */
- st,adc-freq = <1>;
/* 8 sample average control */
st,ave-ctrl = <3>;
/* 7 length fractional part in z */
@@ -859,17 +866,16 @@
* current limit value
*/
st,i-drive = <1>;
- /* 12-bit ADC */
- st,mod-12b = <1>;
- /* internal ADC reference */
- st,ref-sel = <0>;
- /* ADC converstion time: 80 clocks */
- st,sample-time = <4>;
/* 1 ms panel driver settling time */
st,settling = <3>;
/* 5 ms touch detect interrupt delay */
st,touch-det-delay = <5>;
};
+
+ stmpe_adc {
+ compatible = "st,stmpe-adc";
+ st,norequest-mask = <0x0F>;
+ };
};
/*
--
2.19.1
Powered by blists - more mailing lists