| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1542637950.5139.12.camel@pengutronix.de>
Date: Mon, 19 Nov 2018 15:32:30 +0100
From: Philipp Zabel <p.zabel@...gutronix.de>
To: Andrey Smirnov <andrew.smirnov@...il.com>,
linux-kernel@...r.kernel.org
Cc: Fabio Estevam <fabio.estevam@....com>, cphealy@...il.com,
l.stach@...gutronix.de, Leonard Crestez <leonard.crestez@....com>,
"A.s. Dong" <aisheng.dong@....com>,
Richard Zhu <hongxing.zhu@....com>, linux-imx@....com,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 1/1] reset: imx7: Add support for i.MX8MQ
Hi Andrey,
thank you for the patch.
In general, sharing the lookup table with i.MX7 is fine iff it is a
strict superset. But I don't think that is the case (see below).
Even so, this will change if there ever is another i.MX7 or i.MX8M
variant that is also a superset of i.MX7, but not a superset of
i.MX8M. Also, just listing all resets in order of appearance would make
review a bit easier.
I don't like increasing IMX7_RESET_NUM though, i.MX8M should have its
own nr_resets.
On Sat, 2018-11-17 at 10:11 -0800, Andrey Smirnov wrote:
> SRC IP block used in i.MX8MQ is a superset of what is found in i.MX7D,
Is this true, though?
i.MX7 has SRC_ERCR at offset 0x14 and HSICPHY_RCR at offset 0x1c.
According to documentation, i.MX8M is missing those at least.
> so add all of the definitions necessary to support both.
>
> Cc: p.zabel@...gutronix.de
> Cc: Fabio Estevam <fabio.estevam@....com>
> Cc: cphealy@...il.com
> Cc: l.stach@...gutronix.de
> Cc: Leonard Crestez <leonard.crestez@....com>
> Cc: "A.s. Dong" <aisheng.dong@....com>
> Cc: Richard Zhu <hongxing.zhu@....com>
> Cc: linux-imx@....com
> Cc: linux-arm-kernel@...ts.infradead.org
> Cc: linux-kernel@...r.kernel.org
> Signed-off-by: Andrey Smirnov <andrew.smirnov@...il.com>
> ---
> drivers/reset/Kconfig | 2 +-
> drivers/reset/reset-imx7.c | 66 ++++++++++++++++++++++++-
> include/dt-bindings/reset/imx7-reset.h | 15 +++++-
> include/dt-bindings/reset/imx8m-reset.h | 47 ++++++++++++++++++
> 4 files changed, 127 insertions(+), 3 deletions(-)
> create mode 100644 include/dt-bindings/reset/imx8m-reset.h
>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index c21da9fe51ec..4909aab7401b 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -50,7 +50,7 @@ config RESET_HSDK
> config RESET_IMX7
> bool "i.MX7 Reset Driver" if COMPILE_TEST
> depends on HAS_IOMEM
> - default SOC_IMX7D
> + default SOC_IMX7D || SOC_IMX8MQ
> select MFD_SYSCON
> help
> This enables the reset controller driver for i.MX7 SoCs.
> diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
> index 77911fa8f31d..dffad618f805 100644
> --- a/drivers/reset/reset-imx7.c
> +++ b/drivers/reset/reset-imx7.c
> @@ -21,14 +21,16 @@
> #include <linux/reset-controller.h>
> #include <linux/regmap.h>
> #include <dt-bindings/reset/imx7-reset.h>
> +#include <dt-bindings/reset/imx8m-reset.h>
>
> struct imx7_src {
> struct reset_controller_dev rcdev;
> struct regmap *regmap;
> };
>
> -enum imx7_src_registers {
> +enum imx_src_registers {
> SRC_A7RCR0 = 0x0004,
> + SRC_A53RCR0 = 0x0004,
> SRC_M4RCR = 0x000c,
> SRC_ERCR = 0x0014,
> SRC_HSICPHY_RCR = 0x001c,
> @@ -36,7 +38,9 @@ enum imx7_src_registers {
> SRC_USBOPHY2_RCR = 0x0024,
> SRC_MIPIPHY_RCR = 0x0028,
> SRC_PCIEPHY_RCR = 0x002c,
These aren't complete. I see at least SRC_HDMI_RCR, SRC_DISP_RCR,
SRC_GPU_RCR, and SRC_VPU_RCR missing.
> + SRC_PCIE2PHY_RCR = 0x0048,
And SRC_MIPIPHY1_RCR, SRC_MIPIPHY2_RCR. Please check the reference
manual and complete the list of registers that contain resets.
> SRC_DDRC_RCR = 0x1000,
> +
Whitespace.
> };
>
> struct imx7_src_signal {
> @@ -67,11 +71,67 @@ static const struct imx7_src_signal imx7_src_signals[IMX7_RESET_NUM] = {
> [IMX7_RESET_PCIEPHY] = { SRC_PCIEPHY_RCR, BIT(2) | BIT(1) },
> [IMX7_RESET_PCIEPHY_PERST] = { SRC_PCIEPHY_RCR, BIT(3) },
> [IMX7_RESET_PCIE_CTRL_APPS_EN] = { SRC_PCIEPHY_RCR, BIT(6) },
> + [IMX7_RESET_PCIE_CTRL_APPS_CLK_REQ] = { SRC_PCIEPHY_RCR, BIT(4) },
Now I feel like CTRL_APPS_EN shouldn't have been added here either. But
while there I wasn't really sure about whether that is actually a valid
reset, I'm pretty sure that this one isn't.
I think that i.MX8M either needs a clock driver to control this bit and
the corresponding IOMUXC GPR bit to enable the PCIe refclk, or the PCIe
driver has to access this register via syscon. I really don't want to
see a clock enable signal described in the device tree as a reset.
> [IMX7_RESET_PCIE_CTRL_APPS_TURNOFF] = { SRC_PCIEPHY_RCR, BIT(11) },
> [IMX7_RESET_DDRC_PRST] = { SRC_DDRC_RCR, BIT(0) },
> [IMX7_RESET_DDRC_CORE_RST] = { SRC_DDRC_RCR, BIT(1) },
> +
> + [IMX8M_RESET_A53_CORE_POR_RESET2] = { SRC_A53RCR0, BIT(2) },
> + [IMX8M_RESET_A53_CORE_POR_RESET3] = { SRC_A53RCR0, BIT(3) },
> + [IMX8M_RESET_A53_CORE_RESET2] = { SRC_A53RCR0, BIT(6) },
> + [IMX8M_RESET_A53_CORE_RESET3] = { SRC_A53RCR0, BIT(7) },
Missing IMX8M_RESET_A53_DBG_RESET2,3.
> + [IMX8M_RESET_A53_ETM_RESET2] = { SRC_A53RCR0, BIT(14) },
> + [IMX8M_RESET_A53_ETM_RESET3] = { SRC_A53RCR0, BIT(15) },
Missing some reset registers here.
> + [IMX8M_RESET_PCIE2PHY] = { SRC_PCIEPHY_RCR, BIT(2) | BIT(1) },
> + [IMX8M_RESET_PCIE2PHY_PERST] = { SRC_PCIE2PHY_RCR, BIT(3) },
> + [IMX8M_RESET_PCIE2_CTRL_APPS_EN] = { SRC_PCIE2PHY_RCR, BIT(6) },
> + [IMX8M_RESET_PCIE2_CTRL_APPS_CLK_REQ] = { SRC_PCIE2PHY_RCR, BIT(4) },
See above.
> + [IMX8M_RESET_PCIE2_CTRL_APPS_TURNOFF] = { SRC_PCIE2PHY_RCR, BIT(11) },
Missing some reset registers here.
> };
>
> +static inline void imx7_src_check_definitions(void)
> +{
> + BUILD_BUG_ON(IMX8M_RESET_A53_CORE_POR_RESET0 !=
> + IMX7_RESET_A7_CORE_POR_RESET0);
> + BUILD_BUG_ON(IMX8M_RESET_A53_CORE_POR_RESET1 !=
> + IMX7_RESET_A7_CORE_POR_RESET1);
> + BUILD_BUG_ON(IMX8M_RESET_A53_CORE_RESET0 !=
> + IMX7_RESET_A7_CORE_RESET0);
> + BUILD_BUG_ON(IMX8M_RESET_A53_CORE_RESET1 !=
> + IMX7_RESET_A7_CORE_RESET1);
> + BUILD_BUG_ON(IMX8M_RESET_A53_DBG_RESET0 !=
> + IMX7_RESET_A7_DBG_RESET0);
> + BUILD_BUG_ON(IMX8M_RESET_A53_DBG_RESET1 !=
> + IMX7_RESET_A7_DBG_RESET1);
> + BUILD_BUG_ON(IMX8M_RESET_A53_ETM_RESET0 !=
> + IMX7_RESET_A7_ETM_RESET0);
> + BUILD_BUG_ON(IMX8M_RESET_A53_ETM_RESET1 !=
> + IMX7_RESET_A7_ETM_RESET1);
> + BUILD_BUG_ON(IMX8M_RESET_A53_SOC_DBG_RESET !=
> + IMX7_RESET_A7_SOC_DBG_RESET);
> + BUILD_BUG_ON(IMX8M_RESET_A53_L2RESET != IMX7_RESET_A7_L2RESET);
> + BUILD_BUG_ON(IMX8M_RESET_SW_M4C_RST != IMX7_RESET_SW_M4C_RST);
> + BUILD_BUG_ON(IMX8M_RESET_SW_M4P_RST != IMX7_RESET_SW_M4P_RST);
> + BUILD_BUG_ON(IMX8M_RESET_EIM_RST != IMX7_RESET_EIM_RST);
> + BUILD_BUG_ON(IMX8M_RESET_HSICPHY_PORT_RST !=
> + IMX7_RESET_HSICPHY_PORT_RST);
> + BUILD_BUG_ON(IMX8M_RESET_USBPHY1_POR != IMX7_RESET_USBPHY1_POR);
> + BUILD_BUG_ON(IMX8M_RESET_USBPHY1_PORT_RST !=
> + IMX7_RESET_USBPHY1_PORT_RST);
> + BUILD_BUG_ON(IMX8M_RESET_USBPHY2_POR != IMX7_RESET_USBPHY2_POR);
> + BUILD_BUG_ON(IMX8M_RESET_USBPHY2_PORT_RST !=
> + IMX7_RESET_USBPHY2_PORT_RST);
> + BUILD_BUG_ON(IMX8M_RESET_MIPI_PHY_MRST != IMX7_RESET_MIPI_PHY_MRST);
> + BUILD_BUG_ON(IMX8M_RESET_MIPI_PHY_SRST != IMX7_RESET_MIPI_PHY_SRST);
> + BUILD_BUG_ON(IMX8M_RESET_PCIEPHY != IMX7_RESET_PCIEPHY);
> + BUILD_BUG_ON(IMX8M_RESET_PCIE_CTRL_APPS_EN !=
> + IMX7_RESET_PCIE_CTRL_APPS_EN);
> + BUILD_BUG_ON(IMX8M_RESET_PCIE_CTRL_APPS_TURNOFF !=
> + IMX7_RESET_PCIE_CTRL_APPS_TURNOFF);
> + BUILD_BUG_ON(IMX8M_RESET_DDRC_PRST != IMX7_RESET_DDRC_PRST);
> + BUILD_BUG_ON(IMX8M_RESET_DDRC_CORE_RST != IMX7_RESET_DDRC_CORE_RST);
> +}
This won't be necessary with a separate lookup table.
> static struct imx7_src *to_imx7_src(struct reset_controller_dev *rcdev)
> {
> return container_of(rcdev, struct imx7_src, rcdev);
> @@ -85,6 +145,7 @@ static int imx7_reset_set(struct reset_controller_dev *rcdev,
> unsigned int value = assert ? signal->bit : 0;
>
> switch (id) {
> + case IMX8M_RESET_PCIE2PHY: /* FALLTHROUGH */
I'd prefer lowercase /* fallthrough */.
> case IMX7_RESET_PCIEPHY:
> /*
> * wait for more than 10us to release phy g_rst and
> @@ -94,6 +155,7 @@ static int imx7_reset_set(struct reset_controller_dev *rcdev,
> udelay(10);
> break;
>
> + case IMX8M_RESET_PCIE2_CTRL_APPS_EN: /* FALLTHROUGH */
And here.
> case IMX7_RESET_PCIE_CTRL_APPS_EN:
> value = (assert) ? 0 : signal->bit;
> break;
> @@ -126,6 +188,8 @@ static int imx7_reset_probe(struct platform_device *pdev)
> struct device *dev = &pdev->dev;
> struct regmap_config config = { .name = "src" };
>
> + imx7_src_check_definitions();
> +
> imx7src = devm_kzalloc(dev, sizeof(*imx7src), GFP_KERNEL);
> if (!imx7src)
> return -ENOMEM;
> diff --git a/include/dt-bindings/reset/imx7-reset.h b/include/dt-bindings/reset/imx7-reset.h
> index 31b3f87dde9a..8fefd694d481 100644
> --- a/include/dt-bindings/reset/imx7-reset.h
> +++ b/include/dt-bindings/reset/imx7-reset.h
> @@ -57,8 +57,21 @@
> #define IMX7_RESET_DDRC_CORE_RST 24
>
> #define IMX7_RESET_PCIE_CTRL_APPS_TURNOFF 25
> +#define IMX7_RESET_PCIE_CTRL_APPS_CLK_REQ 26
See above.
> -#define IMX7_RESET_NUM 26
Please leave this at 26.
> +#define IMX8M_RESET_A53_CORE_POR_RESET2 27
> +#define IMX8M_RESET_A53_CORE_POR_RESET3 28
> +#define IMX8M_RESET_A53_CORE_RESET2 29
> +#define IMX8M_RESET_A53_CORE_RESET3 30
> +#define IMX8M_RESET_A53_ETM_RESET2 31
> +#define IMX8M_RESET_A53_ETM_RESET3 32
> +#define IMX8M_RESET_PCIE2PHY 33
> +#define IMX8M_RESET_PCIE2PHY_PERST 34
> +#define IMX8M_RESET_PCIE2_CTRL_APPS_EN 35
> +#define IMX8M_RESET_PCIE2_CTRL_APPS_CLK_REQ 36
See above.
> +#define IMX8M_RESET_PCIE2_CTRL_APPS_TURNOFF 37
Move these into imx8m-reset.h
> +
> +#define IMX7_RESET_NUM 38
And add a separate IMX8M_RESET_NUM.
>
> #endif
>
> diff --git a/include/dt-bindings/reset/imx8m-reset.h b/include/dt-bindings/reset/imx8m-reset.h
> new file mode 100644
> index 000000000000..8fa840354723
> --- /dev/null
> +++ b/include/dt-bindings/reset/imx8m-reset.h
> @@ -0,0 +1,47 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2018 Zodiac Inflight Innovations
> + *
> + * Author: Andrey Smirnov <andrew.smirnov@...il.com>
> + */
> +
> +#ifndef DT_BINDING_RESET_IMX8M_H
> +#define DT_BINDING_RESET_IMX8M_H
> +
> +#include "imx7-reset.h"
> +
> +#define IMX8M_RESET_A53_CORE_POR_RESET0 IMX7_RESET_A7_CORE_POR_RESET0
> +#define IMX8M_RESET_A53_CORE_POR_RESET1 IMX7_RESET_A7_CORE_POR_RESET1
> +
> +#define IMX8M_RESET_A53_CORE_RESET0 IMX7_RESET_A7_CORE_RESET0
> +#define IMX8M_RESET_A53_CORE_RESET1 IMX7_RESET_A7_CORE_RESET1
> +
> +#define IMX8M_RESET_A53_DBG_RESET0 IMX7_RESET_A7_DBG_RESET0
> +#define IMX8M_RESET_A53_DBG_RESET1 IMX7_RESET_A7_DBG_RESET1
> +
> +#define IMX8M_RESET_A53_ETM_RESET0 IMX7_RESET_A7_ETM_RESET0
> +#define IMX8M_RESET_A53_ETM_RESET1 IMX7_RESET_A7_ETM_RESET1
> +
> +#define IMX8M_RESET_A53_SOC_DBG_RESET IMX7_RESET_A7_SOC_DBG_RESET
> +#define IMX8M_RESET_A53_L2RESET IMX7_RESET_A7_L2RESET
> +#define IMX8M_RESET_SW_M4C_RST IMX7_RESET_SW_M4C_RST
> +#define IMX8M_RESET_SW_M4P_RST IMX7_RESET_SW_M4P_RST
> +#define IMX8M_RESET_EIM_RST IMX7_RESET_EIM_RST
> +#define IMX8M_RESET_HSICPHY_PORT_RST IMX7_RESET_HSICPHY_PORT_RST
These two don't exist according to the reference manual.
> +#define IMX8M_RESET_USBPHY1_POR IMX7_RESET_USBPHY1_POR
> +#define IMX8M_RESET_USBPHY1_PORT_RST IMX7_RESET_USBPHY1_PORT_RST
These two don't seem to exist either. I only see a single OTG1_PHY_RESET
bit in that register.
> +#define IMX8M_RESET_USBPHY2_POR IMX7_RESET_USBPHY2_POR
> +#define IMX8M_RESET_USBPHY2_PORT_RST IMX7_RESET_USBPHY2_PORT_RST
Same here.
> +#define IMX8M_RESET_MIPI_PHY_MRST IMX7_RESET_MIPI_PHY_MRST
> +#define IMX8M_RESET_MIPI_PHY_SRST IMX7_RESET_MIPI_PHY_SRST
These don't exist either. The MIPIPHY_RCR register instead has 5
different _RESET_N bits.
> +#define IMX8M_RESET_PCIEPHY IMX7_RESET_PCIEPHY
> +#define IMX8M_RESET_PCIEPHY_PERST IMX7_RESET_PCIEPHY_PERST
> +#define IMX8M_RESET_PCIE_CTRL_APPS_EN IMX7_RESET_PCIE_CTRL_APPS_EN
> +#define IMX8M_RESET_DDRC_PRST IMX7_RESET_DDRC_PRST
> +#define IMX8M_RESET_DDRC_CORE_RST IMX7_RESET_DDRC_CORE_RST
> +
> +#define IMX8M_RESET_PCIE_CTRL_APPS_TURNOFF IMX7_RESET_PCIE_CTRL_APPS_TURNOFF
> +#define IMX8M_RESET_PCIE_CTRL_APPS_CLK_REQ IMX7_RESET_PCIE_CTRL_APPS_CLK_REQ
> +
> +#endif
regards
Philipp
Powered by blists - more mailing lists