linux-kernel - [PATCH v2 1/5] dt-bindings: soc: Add a new binding for the BCM2835 PM node.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181120213702.27958-2-eric@anholt.net>
Date:   Tue, 20 Nov 2018 13:36:58 -0800
From:   Eric Anholt <eric@...olt.net>
To:     Florian Fainelli <f.fainelli@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Wim Van Sebroeck <wim@...ux-watchdog.org>,
        Guenter Roeck <linux@...ck-us.net>,
        linux-watchdog@...r.kernel.org
Cc:     linux-rpi-kernel@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Stefan Wahren <stefan.wahren@...e.com>,
        bcm-kernel-feedback-list@...adcom.com,
        Eric Anholt <eric@...olt.net>
Subject: [PATCH v2 1/5] dt-bindings: soc: Add a new binding for the BCM2835 PM node.

This binding supersedes the bcm2835-pm-wdt binding which only covered
enough to provide a watchdog, but the HW block is actually mostly
about power domains.

Signed-off-by: Eric Anholt <eric@...olt.net>
---
 .../bindings/soc/bcm/brcm,bcm2835-pm.txt      | 42 +++++++++++++++++++
 1 file changed, 42 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt

diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
new file mode 100644
index 000000000000..7818d33a158f
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
@@ -0,0 +1,42 @@
+BCM2835 PM (Power domains, watchdog)
+
+The PM block controls power domains and some reset lines, and includes
+a watchdog timer.  This binding supersedes the brcm,bcm2835-pm-wdt
+binding which covered some of PM's register range and functionality.
+
+Required properties:
+
+- compatible:		Should be "brcm,bcm2835-pm"
+- reg:			Specifies base physical address and size of the two
+			  register ranges ("PM" and "ASYNC_BRIDGE" in that
+			  order)
+- clocks:		a) v3d: The V3D clock from CPRMAN
+			b) peri_image: The PERI_IMAGE clock from CPRMAN
+			c) h264: The H264 clock from CPRMAN
+			d) isp: The ISP clock from CPRMAN
+- #reset-cells: 	Should be 1.  This property follows the reset controller
+			  bindings[1].
+- #power-domain-cells:	Should be 1.  This property follows the power domain
+			  bindings[2].
+
+Optional properties:
+
+- timeout-sec:	Contains the watchdog timeout in seconds
+
+[1] Documentation/devicetree/bindings/reset/reset.txt
+[2] Documentation/devicetree/bindings/power/power_domain.txt
+
+Example:
+
+pm {
+	compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+	#power-domain-cells = <1>;
+	#reset-cells = <1>;
+	reg = <0x7e100000 0x114>,
+	      <0x7e00a000 0x24>;
+	clocks = <&clocks BCM2835_CLOCK_V3D>,
+		 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+		 <&clocks BCM2835_CLOCK_H264>,
+		 <&clocks BCM2835_CLOCK_ISP>;
+	clock-names = "v3d", "peri_image", "h264", "isp";
+};
-- 
2.19.1