lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181120100318.367987-5-lkundrak@v3.sk>
Date:   Tue, 20 Nov 2018 11:03:09 +0100
From:   Lubomir Rintel <lkundrak@...sk>
To:     Mauro Carvalho Chehab <mchehab@...nel.org>,
        Jonathan Corbet <corbet@....net>, linux-media@...r.kernel.org
Cc:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Lubomir Rintel <lkundrak@...sk>,
        James Cameron <quozl@...top.org>, Pavel Machek <pavel@....cz>,
        Libin Yang <lbyang@...vell.com>,
        Albert Wang <twang13@...vell.com>
Subject: [PATCH v3 04/14] media: ov7670: control clock along with power

This provides more power saving when the sensor is off.

While at that, do the delay on power/clock enable even if the sensor driver
itself doesn't control the GPIOs. This is required for the OLPC XO-1
platform, that lacks the proper power/reset properties in its DT, but
needs the delay after the sensor is clocked up.

Signed-off-by: Lubomir Rintel <lkundrak@...sk>
---
 drivers/media/i2c/ov7670.c | 30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)

diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
index cbaab60aaaac..d7635fb2d713 100644
--- a/drivers/media/i2c/ov7670.c
+++ b/drivers/media/i2c/ov7670.c
@@ -1623,14 +1623,17 @@ static void ov7670_power_on(struct v4l2_subdev *sd)
 	if (info->on)
 		return;
 
+	clk_prepare_enable(info->clk);
+
 	if (info->pwdn_gpio)
 		gpiod_set_value(info->pwdn_gpio, 0);
 	if (info->resetb_gpio) {
 		gpiod_set_value(info->resetb_gpio, 1);
 		usleep_range(500, 1000);
 		gpiod_set_value(info->resetb_gpio, 0);
-		usleep_range(3000, 5000);
 	}
+	if (info->pwdn_gpio || info->resetb_gpio || info->clk)
+		usleep_range(3000, 5000);
 
 	info->on = true;
 }
@@ -1642,6 +1645,8 @@ static void ov7670_power_off(struct v4l2_subdev *sd)
 	if (!info->on)
 		return;
 
+	clk_disable_unprepare(info->clk);
+
 	if (info->pwdn_gpio)
 		gpiod_set_value(info->pwdn_gpio, 1);
 
@@ -1863,24 +1868,20 @@ static int ov7670_probe(struct i2c_client *client,
 			return ret;
 	}
 
-	if (info->clk) {
-		ret = clk_prepare_enable(info->clk);
-		if (ret)
-			return ret;
+	ret = ov7670_init_gpio(client, info);
+	if (ret)
+		return ret;
 
+	ov7670_power_on(sd);
+
+	if (info->clk) {
 		info->clock_speed = clk_get_rate(info->clk) / 1000000;
 		if (info->clock_speed < 10 || info->clock_speed > 48) {
 			ret = -EINVAL;
-			goto clk_disable;
+			goto power_off;
 		}
 	}
 
-	ret = ov7670_init_gpio(client, info);
-	if (ret)
-		goto clk_disable;
-
-	ov7670_power_on(sd);
-
 	/* Make sure it's an ov7670 */
 	ret = ov7670_detect(sd);
 	if (ret) {
@@ -1960,6 +1961,7 @@ static int ov7670_probe(struct i2c_client *client,
 	if (ret < 0)
 		goto entity_cleanup;
 
+	ov7670_power_off(sd);
 	return 0;
 
 entity_cleanup:
@@ -1968,12 +1970,9 @@ static int ov7670_probe(struct i2c_client *client,
 	v4l2_ctrl_handler_free(&info->hdl);
 power_off:
 	ov7670_power_off(sd);
-clk_disable:
-	clk_disable_unprepare(info->clk);
 	return ret;
 }
 
-
 static int ov7670_remove(struct i2c_client *client)
 {
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
@@ -1981,7 +1980,6 @@ static int ov7670_remove(struct i2c_client *client)
 
 	v4l2_async_unregister_subdev(sd);
 	v4l2_ctrl_handler_free(&info->hdl);
-	clk_disable_unprepare(info->clk);
 	media_entity_cleanup(&info->sd.entity);
 	ov7670_power_off(sd);
 	return 0;
-- 
2.19.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ