| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <TY1PR01MB1769AD7F2D11DB06E1B0CC0DF5D90@TY1PR01MB1769.jpnprd01.prod.outlook.com>
Date: Tue, 20 Nov 2018 10:30:58 +0000
From: Phil Edworthy <phil.edworthy@...esas.com>
To: Rob Herring <robh@...nel.org>
CC: Marc Zyngier <marc.zyngier@....com>,
Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Mark Rutland <mark.rutland@....com>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
"open list:MEDIA DRIVERS FOR RENESAS - FCP"
<linux-renesas-soc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
Subject: RE: [PATCH v3 1/2] dt-bindings/interrupt-controller: rzn1: Add RZ/N1
gpio irq mux binding
Hi Rob,
On 19 November 2018 21:51, Rob Herring wrote:
> On Mon, Nov 19, 2018 at 3:39 AM Phil Edworthy
> <phil.edworthy@...esas.com> wrote:
> >
> > Hi Rob,
> >
> > On 17 November 2018 14:33 Rob Herring wrote:
> > > On Tue, Nov 13, 2018 at 01:09:09PM +0000, Phil Edworthy wrote:
> > > > Add device binding documentation for the Renesas RZ/N1 GPIO
> > > > interrupt multiplexer.
> > > >
> > > > Signed-off-by: Phil Edworthy <phil.edworthy@...esas.com>
> > > > ---
> > > > v3:
> > > > - Use 'interrupt-map' DT property correctly.
> > > > v2:
> > > > - Use interrupt-map to allow the GPIO controller info to be specified
> > > > as part of the irq.
> > > > - Don't show status in binding examples.
> > > > - Don't show the soc/board split in binding doc.
> > > > ---
> > > > .../interrupt-controller/renesas,rzn1-mux.txt | 73
> > > > +++++++++++++++++++
> > > > 1 file changed, 73 insertions(+)
> > > > create mode 100644
> > > > Documentation/devicetree/bindings/interrupt-controller/renesas,rzn
> > > > 1-mu
> > > > x.txt
> > >
> > > A few nits, otherwise:
> > >
> > > Reviewed-by: Rob Herring <robh@...nel.org>
> > Thanks for the review!
> >
> > > >
> > > > diff --git
> > > > a/Documentation/devicetree/bindings/interrupt-controller/renesas,r
> > > > zn1-
> > > > mux.txt
> > > > b/Documentation/devicetree/bindings/interrupt-controller/renesas,r
> > > > zn1-
> > > > mux.txt
> > > > new file mode 100644
> > > > index 000000000000..6515880e25cc
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/interrupt-controller/renes
> > > > +++ as,r
> > > > +++ zn1-mux.txt
> > > > @@ -0,0 +1,73 @@
> > > > +* Renesas RZ/N1 GPIO Interrupt Multiplexer
> > > > +
> > > > +On Renesas RZ/N1 devices, there are several GPIO Controllers each
> > > > +with a number of interrupt outputs. All of the interrupts from
> > > > +the GPIO Controllers are passed to the GPIO Interrupt
> > > > +Multiplexer, which selects a sub-set of the interrupts to pass
> > > > +onto the system interrupt
> > > controller.
> > > > +
> > > > +A single node in the device tree is used to describe the GPIO IRQ
> Muxer.
> > > > +
> > > > +Required properties:
> > > > +- compatible: SoC-specific compatible string
> > > > +"renesas,<soc-specific>-
> > > gpioirqmux"
> > > > + followed by "renesas,rzn1-gpioirqmux" as fallback. The
> > > > +SoC-specific compatible
> > > > + strings must be one of:
> > > > + "renesas,r9a06g032-gpioirqmux" for RZ/N1D
> > > > + "renesas,r9a06g033-gpioirqmux" for RZ/N1S
> > > > +- reg: Base address and size of GPIO IRQ Muxer registers.
> > > > +- interrupts: List of output interrupts.
> > > > +- #interrupt-cells: Numder of cells in the input interrupt
> > > > +specifier, must be
> > > 1.
> > > > +- #address-cells: Must be 0.
> > > > +- interrupt-map-mask: must be 127.
> > > > +- interrupt-map: Standard property detailing the maps between
> > > > +input irqs and the
> > > > + corresponding output irq. This consist of a list of:
> > > > + <input-irq-spec phandle-to-interrupt-controller
> > > > +output-irq-spec>
> > > > + The input-irq-spec is from 0 to 95, corresponding to the
> > > > +outputs of the GPIO
> > > > + Controllers.
> > > > +
> > > > +Example:
> > > > +
> > > > + The following is an example for the RZ/N1D SoC.
> > > > +
> > > > + gpioirqmux: gpioirqmux@...00480 {
> > >
> > > interrupt-controller@...
> > Sure
> >
> > > > + compatible = "renesas,r9a06g032-gpioirqmux",
> > > > + "renesas,rzn1-gpioirqmux";
> > > > + reg = <0x51000480 0x20>;
> > > > + interrupts =
> > > > + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> > > > + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
> > >
> > > This is a bit redundant as the same information is in interrupt-map,
> > > but I guess you need it to get the irq resources.
> > That's right.
> >
> > > > +
> > > > + #interrupt-cells = <1>;
> > > > + #address-cells = <0>;
> > > > + interrupt-map-mask = <127>;
> > >
> > > Use hex for masks.
> > Ok.
> >
> > > > + interrupt-map =
> > > > + /* gpio2a 24, pin 146: ETH Port 1 IRQ */
> > > > + <88 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> > > > + /* gpio2a 26, pin 148: TouchSCRN_IRQ */
> > > > + <90 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
> > > > + };
> > > > +
> > > > + gpio2: gpio@...0d000 {
> > > > + compatible = "snps,dw-apb-gpio";
> > > > + reg = <0x5000d000 0x80>;
> > > > + #address-cells = <1>;
> > > > + #size-cells = <0>;
> > > > + clock-names = "bus";
> > > > + clocks = <&sysctrl R9A06G032_HCLK_GPIO2>;
> > > > +
> > > > + gpio2a: gpio-controller@0 {
> > >
> > > gpio@0
> > Are you sure about this?
>
> Yes, 'gpio' is what the DT spec says. It is the oddball though and I always have
> to think about it.
OK, got it.
> > The bindings in
> > Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
> > show an example where the sub-nodes for gpio banks are gpio-
> controller@.
> > This is also in Documentation/devicetree/bindings/gpio/gpio.txt.
>
> Indeed. Those should be fixed. I would be easily persuaded to just change
> the spec, but 'gpio@' is much more widely used:
>
> $ git grep gpio@ -- arch/ | wc
> 1110 4378 67766
> $ git grep gpio-controller@ -- arch/ | wc
> 60 232 4270
>
Yes, indeed.
Thanks
Phil
Powered by blists - more mailing lists