linux-kernel - [PATCH v6 4/7] dmaengine: xilinx_dma: program hardware supported buffer length

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181120153151.18024-4-andrea.merello@gmail.com>
Date:   Tue, 20 Nov 2018 16:31:48 +0100
From:   Andrea Merello <andrea.merello@...il.com>
To:     vkoul@...nel.org, dan.j.williams@...el.com,
        michal.simek@...inx.com, appana.durga.rao@...inx.com,
        dmaengine@...r.kernel.org
Cc:     linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        robh+dt@...nel.org, mark.rutland@....com,
        devicetree@...r.kernel.org, radhey.shyam.pandey@...inx.com,
        Andrea Merello <andrea.merello@...il.com>
Subject: [PATCH v6 4/7] dmaengine: xilinx_dma: program hardware supported buffer length

From: Radhey Shyam Pandey <radhey.shyam.pandey@...inx.com>

AXI-DMA IP supports configurable (c_sg_length_width) buffer length
register width, hence read buffer length (xlnx,sg-length-width) DT
property and ensure that driver doesn't program buffer length
exceeding the supported limit. For VDMA and CDMA there is no change.

Cc: Rob Herring <robh+dt@...nel.org>
Cc: Mark Rutland <mark.rutland@....com>
Cc: devicetree@...r.kernel.org
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@...inx.com>
Signed-off-by: Michal Simek <michal.simek@...inx.com>
Signed-off-by: Andrea Merello <andrea.merello@...il.com> [rebase, reword]
---
Changes in v2:
        - drop original patch and replace with the one in Xilinx tree
Changes in v3:
	- cc DT maintainers/ML
Changes in v4:
	- upper bound for the property should be 26, not 23
	- add warn for width > 23 as per xilinx original patch
	- rework due to changes introduced in 1/6
Changes in v5:
	None
Changes in v6:
	None
---
 drivers/dma/xilinx/xilinx_dma.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index cbf34dd5e966..0716db61f1d0 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -161,7 +161,9 @@
 #define XILINX_DMA_REG_BTT		0x28
 
 /* AXI DMA Specific Masks/Bit fields */
-#define XILINX_DMA_MAX_TRANS_LEN	GENMASK(22, 0)
+#define XILINX_DMA_MAX_TRANS_LEN_MIN	8
+#define XILINX_DMA_MAX_TRANS_LEN_MAX	23
+#define XILINX_DMA_V2_MAX_TRANS_LEN_MAX	26
 #define XILINX_DMA_CR_COALESCE_MAX	GENMASK(23, 16)
 #define XILINX_DMA_CR_CYCLIC_BD_EN_MASK	BIT(4)
 #define XILINX_DMA_CR_COALESCE_SHIFT	16
@@ -2622,7 +2624,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	struct xilinx_dma_device *xdev;
 	struct device_node *child, *np = pdev->dev.of_node;
 	struct resource *io;
-	u32 num_frames, addr_width;
+	u32 num_frames, addr_width, len_width;
 	int i, err;
 
 	/* Allocate and initialize the DMA engine structure */
@@ -2654,10 +2656,24 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 
 	/* Retrieve the DMA engine properties from the device tree */
 	xdev->has_sg = of_property_read_bool(node, "xlnx,include-sg");
-	xdev->max_buffer_len = XILINX_DMA_MAX_TRANS_LEN;
+	xdev->max_buffer_len = GENMASK(XILINX_DMA_MAX_TRANS_LEN_MAX - 1, 0);
 
-	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
+	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 		xdev->mcdma = of_property_read_bool(node, "xlnx,mcdma");
+		if (!of_property_read_u32(node, "xlnx,sg-length-width",
+					  &len_width)) {
+			if (len_width < XILINX_DMA_MAX_TRANS_LEN_MIN ||
+			    len_width > XILINX_DMA_V2_MAX_TRANS_LEN_MAX) {
+				dev_warn(xdev->dev,
+					 "invalid xlnx,sg-length-width property value. Using default width\n");
+			} else {
+				if (len_width > XILINX_DMA_MAX_TRANS_LEN_MAX)
+					dev_warn(xdev->dev, "Please ensure that IP supports buffer length > 23 bits\n");
+				xdev->max_buffer_len =
+					GENMASK(len_width - 1, 0);
+			}
+		}
+	}
 
 	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 		err = of_property_read_u32(node, "xlnx,num-fstores",
-- 
2.17.1