linux-kernel - [PATCH v3 3/5] Bluetooth: Reset Bluetooth chip after multiple command timeouts

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181121235020.29461-3-rajatja@google.com>
Date:   Wed, 21 Nov 2018 15:50:18 -0800
From:   Rajat Jain <rajatja@...gle.com>
To:     Marcel Holtmann <marcel@...tmann.org>,
        Johan Hedberg <johan.hedberg@...il.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        "David S. Miller" <davem@...emloft.net>,
        Dmitry Torokhov <dtor@...omium.org>,
        Rajat Jain <rajatja@...gle.com>,
        Alex Hung <alex.hung@...onical.com>,
        linux-bluetooth@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-usb@...r.kernel.org, netdev@...r.kernel.org
Cc:     rajatxjain@...il.com, dtor@...gle.com, raghuram.hegde@...el.com,
        chethan.tumkur.narayan@...el.com, sukumar.ghorai@...el.com
Subject: [PATCH v3 3/5] Bluetooth: Reset Bluetooth chip after multiple command timeouts

Add a quirk and a hook to allow the HCI core to reset the BT chip
if needed (after a number of timed out commands). Use that new hook to
initiate BT chip reset if the controller fails to respond to certain
number of commands (currently 5) including the HCI reset commands.
This is done based on a newly introduced quirk. This is done based
on some initial work by Intel.

Signed-off-by: Rajat Jain <rajatja@...gle.com>
---
v3: same as v1
v2: same as v1

 include/net/bluetooth/hci.h      |  8 ++++++++
 include/net/bluetooth/hci_core.h |  2 ++
 net/bluetooth/hci_core.c         | 15 +++++++++++++--
 3 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index c36dc1e20556..af02fa5ffe54 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -192,6 +192,14 @@ enum {
 	 *
 	 */
 	HCI_QUIRK_NON_PERSISTENT_SETUP,
+
+	/* When this quirk is set, hw_reset() would be run to reset the
+	 * hardware, after a certain number of commands (currently 5)
+	 * time out because the device fails to respond.
+	 *
+	 * This quirk should be set before hci_register_dev is called.
+	 */
+	HCI_QUIRK_HW_RESET_ON_TIMEOUT,
 };
 
 /* HCI device flags */
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index e5ea633ea368..b86218304b80 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -313,6 +313,7 @@ struct hci_dev {
 	unsigned int	acl_cnt;
 	unsigned int	sco_cnt;
 	unsigned int	le_cnt;
+	unsigned int	timeout_cnt;
 
 	unsigned int	acl_mtu;
 	unsigned int	sco_mtu;
@@ -437,6 +438,7 @@ struct hci_dev {
 	int (*post_init)(struct hci_dev *hdev);
 	int (*set_diag)(struct hci_dev *hdev, bool enable);
 	int (*set_bdaddr)(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+	void (*hw_reset)(struct hci_dev *hdev);
 };
 
 #define HCI_PHY_HANDLE(handle)	(handle & 0xff)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 7352fe85674b..ab3a6a8b7ba6 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -2569,13 +2569,24 @@ static void hci_cmd_timeout(struct work_struct *work)
 	struct hci_dev *hdev = container_of(work, struct hci_dev,
 					    cmd_timer.work);
 
+	hdev->timeout_cnt++;
 	if (hdev->sent_cmd) {
 		struct hci_command_hdr *sent = (void *) hdev->sent_cmd->data;
 		u16 opcode = __le16_to_cpu(sent->opcode);
 
-		bt_dev_err(hdev, "command 0x%4.4x tx timeout", opcode);
+		bt_dev_err(hdev, "command 0x%4.4x tx timeout (cnt = %u)",
+			   opcode, hdev->timeout_cnt);
 	} else {
-		bt_dev_err(hdev, "command tx timeout");
+		bt_dev_err(hdev, "command tx timeout (cnt = %u)",
+			   hdev->timeout_cnt);
+	}
+
+	if (test_bit(HCI_QUIRK_HW_RESET_ON_TIMEOUT, &hdev->quirks) &&
+	    hdev->timeout_cnt >= 5) {
+		hdev->timeout_cnt = 0;
+		if (hdev->hw_reset)
+			hdev->hw_reset(hdev);
+		return;
 	}
 
 	atomic_set(&hdev->cmd_cnt, 1);
-- 
2.19.1.1215.g8438c0b245-goog