lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <AM0PR04MB421114AAD79CB723AB22DD0E80DA0@AM0PR04MB4211.eurprd04.prod.outlook.com>
Date:   Wed, 21 Nov 2018 13:01:44 +0000
From:   Aisheng DONG <aisheng.dong@....com>
To:     Joakim Zhang <qiangqing.zhang@....com>,
        "linux-can@...r.kernel.org" <linux-can@...r.kernel.org>,
        "mkl@...gutronix.de" <mkl@...gutronix.de>
CC:     "wg@...ndegger.com" <wg@...ndegger.com>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        dl-linux-imx <linux-imx@....com>
Subject: RE: [PATCH V4 1/1] can: flexcan: add self wakeup support

> -----Original Message-----
> From: Aisheng DONG
> Sent: Wednesday, November 21, 2018 9:00 PM
> To: Joakim Zhang <qiangqing.zhang@....com>; linux-can@...r.kernel.org;
> mkl@...gutronix.de
> Cc: wg@...ndegger.com; linux-kernel@...r.kernel.org; dl-linux-imx
> <linux-imx@....com>
> Subject: RE: [PATCH V4 1/1] can: flexcan: add self wakeup support
> 
> This mostly looks good to me.
> A few minor comments
> 

BTW, you should re-send the series with binding doc patch if it's still not merged.

Regards
Dong Aisheng

> > -----Original Message-----
> > From: Joakim Zhang
> > Sent: Wednesday, November 21, 2018 8:32 PM
> > To: linux-can@...r.kernel.org; mkl@...gutronix.de
> > Cc: wg@...ndegger.com; linux-kernel@...r.kernel.org; dl-linux-imx
> > <linux-imx@....com>; Aisheng DONG <aisheng.dong@....com>; Joakim
> Zhang
> > <qiangqing.zhang@....com>
> > Subject: [PATCH V4 1/1] can: flexcan: add self wakeup support
> >
> > From: Aisheng Dong <aisheng.dong@....com>
> >
> > If wakeup is enabled, enter stop mode, else enter disabled mode. Self
> > wake can only work on stop mode.
> >
> > Starting from IMX6, the flexcan stop mode control bits is SoC
> > specific, move it out of IP driver and parse it from devicetree.
> >
> > Signed-off-by: Aisheng Dong <aisheng.dong@....com>
> > Signed-off-by: Joakim Zhang <qiangqing.zhang@....com>
> > ---
> >  drivers/net/can/flexcan.c | 163
> > +++++++++++++++++++++++++++++++++++---
> >  1 file changed, 154 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
> > index 8e972ef08637..83431810316e 100644
> > --- a/drivers/net/can/flexcan.c
> > +++ b/drivers/net/can/flexcan.c
> > @@ -19,11 +19,14 @@
> >  #include <linux/delay.h>
> >  #include <linux/interrupt.h>
> >  #include <linux/io.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
> >  #include <linux/module.h>
> >  #include <linux/of.h>
> >  #include <linux/of_device.h>
> >  #include <linux/platform_device.h>
> >  #include <linux/regulator/consumer.h>
> > +#include <linux/regmap.h>
> >
> >  #define DRV_NAME			"flexcan"
> >
> > @@ -131,7 +134,8 @@
> >  	(FLEXCAN_ESR_ERR_BUS | FLEXCAN_ESR_ERR_STATE)  #define
> > FLEXCAN_ESR_ALL_INT \
> >  	(FLEXCAN_ESR_TWRN_INT | FLEXCAN_ESR_RWRN_INT | \
> > -	 FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT)
> > +	FLEXCAN_ESR_BOFF_INT | FLEXCAN_ESR_ERR_INT | \
> > +	FLEXCAN_ESR_WAK_INT)
> >
> >  /* FLEXCAN interrupt flag register (IFLAG) bits */
> >  /* Errata ERR005829 step7: Reserve first valid MB */ @@ -190,6 +194,7
> @@
> >  #define FLEXCAN_QUIRK_USE_OFF_TIMESTAMP	BIT(5) /* Use timestamp
> > based offloading */
> >  #define FLEXCAN_QUIRK_BROKEN_PERR_STATE	BIT(6) /* No interrupt
> for
> > error passive */
> >  #define FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN	BIT(7) /* default to BE
> > register access */
> > +#define FLEXCAN_QUIRK_SETUP_STOP_MODE		BIT(8) /* Setup stop
> > mode to support wakeup */
> >
> >  /* Structure of the message buffer */  struct flexcan_mb { @@ -254,6
> > +259,14 @@ struct flexcan_devtype_data {
> >  	u32 quirks;		/* quirks needed for different IP cores */
> >  };
> >
> > +struct flexcan_stop_mode {
> > +	struct regmap *gpr;
> > +	u8 req_gpr;
> > +	u8 req_bit;
> > +	u8 ack_gpr;
> > +	u8 ack_bit;
> > +};
> > +
> >  struct flexcan_priv {
> >  	struct can_priv can;
> >  	struct can_rx_offload offload;
> > @@ -270,6 +283,7 @@ struct flexcan_priv {
> >  	struct clk *clk_per;
> >  	const struct flexcan_devtype_data *devtype_data;
> >  	struct regulator *reg_xceiver;
> > +	struct flexcan_stop_mode stm;
> >
> >  	/* Read and Write APIs */
> >  	u32 (*read)(void __iomem *addr);
> > @@ -293,7 +307,8 @@ static const struct flexcan_devtype_data
> > fsl_imx28_devtype_data = {
> >
> >  static const struct flexcan_devtype_data fsl_imx6q_devtype_data = {
> >  	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG |
> > FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
> > -		FLEXCAN_QUIRK_USE_OFF_TIMESTAMP |
> > FLEXCAN_QUIRK_BROKEN_PERR_STATE,
> > +		FLEXCAN_QUIRK_USE_OFF_TIMESTAMP |
> > FLEXCAN_QUIRK_BROKEN_PERR_STATE |
> > +		FLEXCAN_QUIRK_SETUP_STOP_MODE,
> >  };
> >
> >  static const struct flexcan_devtype_data fsl_vf610_devtype_data = {
> > @@
> > -353,6 +368,35 @@ static inline void flexcan_write_le(u32 val, void
> > __iomem
> > *addr)
> >  	iowrite32(val, addr);
> >  }
> >
> > +static void flexcan_enable_wakeup_irq(struct flexcan_priv *priv, bool
> > +enable) {
> > +	struct flexcan_regs __iomem *regs = priv->regs;
> > +	u32 reg_mcr;
> > +
> > +	reg_mcr = priv->read(&regs->mcr);
> > +
> > +	if (enable)
> > +		reg_mcr |= FLEXCAN_MCR_WAK_MSK;
> > +	else
> > +		reg_mcr &= ~FLEXCAN_MCR_WAK_MSK;
> > +
> > +	priv->write(reg_mcr, &regs->mcr);
> > +}
> > +
> > +static inline void flexcan_enter_stop_mode(struct flexcan_priv *priv) {
> > +	/* enable stop request */
> > +	regmap_update_bits(priv->stm.gpr, priv->stm.req_gpr,
> > +			   1 << priv->stm.req_bit, 1 << priv->stm.req_bit); }
> > +
> > +static inline void flexcan_exit_stop_mode(struct flexcan_priv *priv) {
> > +	/* remove stop request */
> > +	regmap_update_bits(priv->stm.gpr, priv->stm.req_gpr,
> > +			   1 << priv->stm.req_bit, 0);
> > +}
> > +
> >  static inline void flexcan_error_irq_enable(const struct flexcan_priv *priv)
> {
> >  	struct flexcan_regs __iomem *regs = priv->regs; @@ -940,6 +984,10 @@
> > static int flexcan_chip_start(struct net_device *dev)
> >  		reg_mcr |= FLEXCAN_MCR_FEN |
> >  			FLEXCAN_MCR_MAXMB(priv->tx_mb_idx);
> >  	}
> > +
> > +	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE)
> > +		reg_mcr |= FLEXCAN_MCR_SLF_WAK;
> 
> Please try if you can merge this into flexcan_enable_wakeup_irq().
> If not, you can check with device_can_wakeup() as the stop parsing may fail.
> 
> > +
> >  	netdev_dbg(dev, "%s: writing mcr=0x%08x", __func__, reg_mcr);
> >  	priv->write(reg_mcr, &regs->mcr);
> >
> > @@ -1244,6 +1292,58 @@ static void unregister_flexcandev(struct
> > net_device
> > *dev)
> >  	unregister_candev(dev);
> >  }
> >
> > +static int flexcan_setup_stop_mode(struct platform_device *pdev) {
> > +	struct net_device *dev = platform_get_drvdata(pdev);
> > +	struct device_node *np = pdev->dev.of_node;
> > +	struct device_node *gpr_np;
> > +	struct flexcan_priv *priv;
> > +	phandle phandle;
> > +	u32 out_val[5];
> > +	int ret;
> > +
> > +	if (!np)
> > +		return -EINVAL;
> > +
> > +	/* stop mode property format is:
> > +	 * <&gpr req_gpr req_bit ack_gpr ack_bit>.
> > +	 */
> > +	ret = of_property_read_u32_array(np, "fsl,stop-mode", out_val, 5);
> > +	if (ret) {
> > +		dev_dbg(&pdev->dev, "no stop-mode property\n");
> > +		return ret;
> > +	}
> > +	phandle = *out_val;
> > +
> > +	gpr_np = of_find_node_by_phandle(phandle);
> > +	if (!gpr_np) {
> > +		dev_dbg(&pdev->dev, "could not find gpr node by phandle\n");
> > +		return PTR_ERR(gpr_np);
> > +	}
> > +
> > +	priv = netdev_priv(dev);
> > +	priv->stm.gpr = syscon_node_to_regmap(gpr_np);
> 
> Better to put node here to cover failure case?
> 
> Regards
> Dong Aisheng
> 
> > +	if (IS_ERR(priv->stm.gpr)) {
> > +		dev_dbg(&pdev->dev, "could not find gpr regmap\n");
> > +		return PTR_ERR(priv->stm.gpr);
> > +	}
> > +
> > +	of_node_put(gpr_np);
> > +
> > +	priv->stm.req_gpr = out_val[1];
> > +	priv->stm.req_bit = out_val[2];
> > +	priv->stm.ack_gpr = out_val[3];
> > +	priv->stm.ack_bit = out_val[4];
> > +
> > +	dev_dbg(&pdev->dev, "gpr %s req_gpr 0x%x req_bit %u ack_gpr 0x%x
> > ack_bit %u\n",
> > +		gpr_np->full_name, priv->stm.req_gpr, priv->stm.req_bit,
> > priv->stm.ack_gpr,
> > +		priv->stm.ack_bit);
> > +
> > +	device_set_wakeup_capable(&pdev->dev, true);
> > +
> > +	return 0;
> > +}
> > +
> >  static const struct of_device_id flexcan_of_match[] = {
> >  	{ .compatible = "fsl,imx6q-flexcan", .data = &fsl_imx6q_devtype_data, },
> >  	{ .compatible = "fsl,imx28-flexcan", .data =
> > &fsl_imx28_devtype_data, }, @@ -1396,6 +1496,12 @@ static int
> > flexcan_probe(struct platform_device
> > *pdev)
> >
> >  	devm_can_led_init(dev);
> >
> > +	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE) {
> > +		err = flexcan_setup_stop_mode(pdev);
> > +		if (err)
> > +			dev_dbg(&pdev->dev, "failed to setup stop-mode\n");
> > +	}
> > +
> >  	dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%d)\n",
> >  		 priv->regs, dev->irq);
> >
> > @@ -1426,9 +1532,17 @@ static int __maybe_unused
> > flexcan_suspend(struct device *device)
> >  	int err;
> >
> >  	if (netif_running(dev)) {
> > -		err = flexcan_chip_disable(priv);
> > -		if (err)
> > -			return err;
> > +		/* if wakeup is enabled, enter stop mode
> > +		 * else enter disabled mode.
> > +		 */
> > +		if (device_may_wakeup(device)) {
> > +			enable_irq_wake(dev->irq);
> > +			flexcan_enter_stop_mode(priv);
> > +		} else {
> > +			err = flexcan_chip_disable(priv);
> > +			if (err)
> > +				return err;
> > +		}
> >  		netif_stop_queue(dev);
> >  		netif_device_detach(dev);
> >  	}
> > @@ -1447,14 +1561,45 @@ static int __maybe_unused
> > flexcan_resume(struct device *device)
> >  	if (netif_running(dev)) {
> >  		netif_device_attach(dev);
> >  		netif_start_queue(dev);
> > -		err = flexcan_chip_enable(priv);
> > -		if (err)
> > -			return err;
> > +		if (device_may_wakeup(device)) {
> > +			flexcan_enable_wakeup_irq(priv, false);
> > +		} else {
> > +			err = flexcan_chip_enable(priv);
> > +			if (err)
> > +				return err;
> > +		}
> > +	}
> > +	return 0;
> > +}
> > +
> > +static int __maybe_unused flexcan_noirq_suspend(struct device
> > +*device) {
> > +	struct net_device *dev = dev_get_drvdata(device);
> > +	struct flexcan_priv *priv = netdev_priv(dev);
> > +
> > +	if (netif_running(dev) && device_may_wakeup(device))
> > +		flexcan_enable_wakeup_irq(priv, true);
> > +
> > +	return 0;
> > +}
> > +
> > +static int __maybe_unused flexcan_noirq_resume(struct device *device) {
> > +	struct net_device *dev = dev_get_drvdata(device);
> > +	struct flexcan_priv *priv = netdev_priv(dev);
> > +
> > +	if (netif_running(dev) && device_may_wakeup(device)) {
> > +		disable_irq_wake(dev->irq);
> > +		flexcan_exit_stop_mode(priv);
> >  	}
> > +
> >  	return 0;
> >  }
> >
> > -static SIMPLE_DEV_PM_OPS(flexcan_pm_ops, flexcan_suspend,
> > flexcan_resume);
> > +static const struct dev_pm_ops flexcan_pm_ops = {
> > +	SET_SYSTEM_SLEEP_PM_OPS(flexcan_suspend, flexcan_resume)
> > +	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(flexcan_noirq_suspend,
> > +flexcan_noirq_resume) };
> >
> >  static struct platform_driver flexcan_driver = {
> >  	.driver = {
> > --
> > 2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ