Message-ID: <20181122072205.GM2225@minitux>
Date:   Wed, 21 Nov 2018 23:22:05 -0800
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Stephen Boyd <sboyd@...nel.org>
Cc:     Michael Turquette <mturquette@...libre.com>,
        linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, Taniya Das <tdas@...eaurora.org>
Subject: Re: [PATCH] clk: qcom: Move to menuconfig and reduce lines

On Wed 21 Nov 13:01 PST 2018, Stephen Boyd wrote:

> We duplicate the 'depends on' in almost every Kconfig here, and it's
> getting out of hand now that we have tens of options for various SoC
> drivers here. Let's clean it up a little by making a menuconfig for a
> submenu and adding an if wrapper around the driver section.
> 
> Cc: Taniya Das <tdas@...eaurora.org>
> Signed-off-by: Stephen Boyd <sboyd@...nel.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>

Regards,
Bjorn

> ---
>  drivers/clk/qcom/Kconfig | 39 +++++----------------------------------
>  1 file changed, 5 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index a611531df115..1977f40f4bec 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -9,16 +9,17 @@ config QCOM_GDSC
>  config QCOM_RPMCC
>  	bool
>  
> -config COMMON_CLK_QCOM
> +menuconfig COMMON_CLK_QCOM
>  	tristate "Support for Qualcomm's clock controllers"
>  	depends on OF
>  	depends on ARCH_QCOM || COMPILE_TEST
>  	select REGMAP_MMIO
>  	select RESET_CONTROLLER
>  
> +if COMMON_CLK_QCOM
> +
>  config QCOM_A53PLL
>  	tristate "MSM8916 A53 PLL"
> -	depends on COMMON_CLK_QCOM
>  	default ARCH_QCOM
>  	help
>  	  Support for the A53 PLL on MSM8916 devices. It provides
> @@ -28,7 +29,6 @@ config QCOM_A53PLL
>  
>  config QCOM_CLK_APCS_MSM8916
>  	tristate "MSM8916 APCS Clock Controller"
> -	depends on COMMON_CLK_QCOM
>  	depends on QCOM_APCS_IPC || COMPILE_TEST
>  	default ARCH_QCOM
>  	help
> @@ -39,7 +39,6 @@ config QCOM_CLK_APCS_MSM8916
>  
>  config QCOM_CLK_RPM
>  	tristate "RPM based Clock Controller"
> -	depends on COMMON_CLK_QCOM && MFD_QCOM_RPM
>  	select QCOM_RPMCC
>  	help
>  	  The RPM (Resource Power Manager) is a dedicated hardware engine for
> @@ -52,7 +51,6 @@ config QCOM_CLK_RPM
>  
>  config QCOM_CLK_SMD_RPM
>  	tristate "RPM over SMD based Clock Controller"
> -	depends on COMMON_CLK_QCOM && QCOM_SMD_RPM
>  	select QCOM_RPMCC
>  	help
>  	  The RPM (Resource Power Manager) is a dedicated hardware engine for
> @@ -65,7 +63,6 @@ config QCOM_CLK_SMD_RPM
>  
>  config QCOM_CLK_RPMH
>  	tristate "RPMh Clock Driver"
> -	depends on COMMON_CLK_QCOM && QCOM_RPMH
>  	help
>  	 RPMh manages shared resources on some Qualcomm Technologies, Inc.
>  	 SoCs. It accepts requests from other hardware subsystems via RSC.
> @@ -75,7 +72,6 @@ config QCOM_CLK_RPMH
>  config APQ_GCC_8084
>  	tristate "APQ8084 Global Clock Controller"
>  	select QCOM_GDSC
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the global clock controller on apq8084 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -85,7 +81,6 @@ config APQ_MMCC_8084
>  	tristate "APQ8084 Multimedia Clock Controller"
>  	select APQ_GCC_8084
>  	select QCOM_GDSC
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the multimedia clock controller on apq8084 devices.
>  	  Say Y if you want to support multimedia devices such as display,
> @@ -93,7 +88,6 @@ config APQ_MMCC_8084
>  
>  config IPQ_GCC_4019
>  	tristate "IPQ4019 Global Clock Controller"
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the global clock controller on ipq4019 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -101,7 +95,6 @@ config IPQ_GCC_4019
>  
>  config IPQ_GCC_806X
>  	tristate "IPQ806x Global Clock Controller"
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the global clock controller on ipq806x devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -110,7 +103,6 @@ config IPQ_GCC_806X
>  config IPQ_LCC_806X
>  	tristate "IPQ806x LPASS Clock Controller"
>  	select IPQ_GCC_806X
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the LPASS clock controller on ipq806x devices.
>  	  Say Y if you want to use audio devices such as i2s, pcm,
> @@ -118,7 +110,6 @@ config IPQ_LCC_806X
>  
>  config IPQ_GCC_8074
>  	tristate "IPQ8074 Global Clock Controller"
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for global clock controller on ipq8074 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -127,7 +118,6 @@ config IPQ_GCC_8074
>  
>  config MSM_GCC_8660
>  	tristate "MSM8660 Global Clock Controller"
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the global clock controller on msm8660 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -136,7 +126,6 @@ config MSM_GCC_8660
>  config MSM_GCC_8916
>  	tristate "MSM8916 Global Clock Controller"
>  	select QCOM_GDSC
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the global clock controller on msm8916 devices.
>  	  Say Y if you want to use devices such as UART, SPI i2c, USB,
> @@ -144,7 +133,6 @@ config MSM_GCC_8916
>  
>  config MSM_GCC_8960
>  	tristate "APQ8064/MSM8960 Global Clock Controller"
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the global clock controller on apq8064/msm8960 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -153,7 +141,6 @@ config MSM_GCC_8960
>  config MSM_LCC_8960
>  	tristate "APQ8064/MSM8960 LPASS Clock Controller"
>  	select MSM_GCC_8960
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the LPASS clock controller on apq8064/msm8960 devices.
>  	  Say Y if you want to use audio devices such as i2s, pcm,
> @@ -161,7 +148,6 @@ config MSM_LCC_8960
>  
>  config MDM_GCC_9615
>  	tristate "MDM9615 Global Clock Controller"
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the global clock controller on mdm9615 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -170,7 +156,6 @@ config MDM_GCC_9615
>  config MDM_LCC_9615
>  	tristate "MDM9615 LPASS Clock Controller"
>  	select MDM_GCC_9615
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the LPASS clock controller on mdm9615 devices.
>  	  Say Y if you want to use audio devices such as i2s, pcm,
> @@ -179,7 +164,6 @@ config MDM_LCC_9615
>  config MSM_MMCC_8960
>  	tristate "MSM8960 Multimedia Clock Controller"
>  	select MSM_GCC_8960
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the multimedia clock controller on msm8960 devices.
>  	  Say Y if you want to support multimedia devices such as display,
> @@ -188,7 +172,6 @@ config MSM_MMCC_8960
>  config MSM_GCC_8974
>  	tristate "MSM8974 Global Clock Controller"
>  	select QCOM_GDSC
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the global clock controller on msm8974 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -198,7 +181,6 @@ config MSM_MMCC_8974
>  	tristate "MSM8974 Multimedia Clock Controller"
>  	select MSM_GCC_8974
>  	select QCOM_GDSC
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the multimedia clock controller on msm8974 devices.
>  	  Say Y if you want to support multimedia devices such as display,
> @@ -206,7 +188,6 @@ config MSM_MMCC_8974
>  
>  config MSM_GCC_8994
>  	tristate "MSM8994 Global Clock Controller"
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the global clock controller on msm8994 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -215,7 +196,6 @@ config MSM_GCC_8994
>  config MSM_GCC_8996
>  	tristate "MSM8996 Global Clock Controller"
>  	select QCOM_GDSC
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the global clock controller on msm8996 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -225,7 +205,6 @@ config MSM_MMCC_8996
>  	tristate "MSM8996 Multimedia Clock Controller"
>  	select MSM_GCC_8996
>  	select QCOM_GDSC
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the multimedia clock controller on msm8996 devices.
>  	  Say Y if you want to support multimedia devices such as display,
> @@ -233,7 +212,6 @@ config MSM_MMCC_8996
>  
>  config MSM_GCC_8998
>  	tristate "MSM8998 Global Clock Controller"
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the global clock controller on msm8998 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -241,7 +219,6 @@ config MSM_GCC_8998
>  
>  config QCS_GCC_404
>  	tristate "QCS404 Global Clock Controller"
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the global clock controller on QCS404 devices.
>  	  Say Y if you want to use multimedia devices or peripheral
> @@ -249,7 +226,6 @@ config QCS_GCC_404
>  
>  config SDM_CAMCC_845
>  	tristate "SDM845 Camera Clock Controller"
> -	depends on COMMON_CLK_QCOM
>  	select SDM_GCC_845
>  	help
>  	  Support for the camera clock controller on SDM845 devices.
> @@ -258,7 +234,6 @@ config SDM_CAMCC_845
>  config SDM_GCC_660
>  	tristate "SDM660 Global Clock Controller"
>  	select QCOM_GDSC
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the global clock controller on SDM660 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -267,7 +242,6 @@ config SDM_GCC_660
>  config SDM_GCC_845
>  	tristate "SDM845 Global Clock Controller"
>  	select QCOM_GDSC
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the global clock controller on SDM845 devices.
>  	  Say Y if you want to use peripheral devices such as UART, SPI,
> @@ -275,7 +249,6 @@ config SDM_GCC_845
>  
>  config SDM_VIDEOCC_845
>  	tristate "SDM845 Video Clock Controller"
> -	depends on COMMON_CLK_QCOM
>  	select SDM_GCC_845
>  	select QCOM_GDSC
>  	help
> @@ -286,7 +259,6 @@ config SDM_VIDEOCC_845
>  config SDM_DISPCC_845
>  	tristate "SDM845 Display Clock Controller"
>  	select SDM_GCC_845
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the display clock controller on Qualcomm Technologies, Inc
>  	  SDM845 devices.
> @@ -304,7 +276,6 @@ config SPMI_PMIC_CLKDIV
>  
>  config QCOM_HFPLL
>  	tristate "High-Frequency PLL (HFPLL) Clock Controller"
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the high-frequency PLLs present on Qualcomm devices.
>  	  Say Y if you want to support CPU frequency scaling on devices
> @@ -312,7 +283,6 @@ config QCOM_HFPLL
>  
>  config KPSS_XCC
>  	tristate "KPSS Clock Controller"
> -	depends on COMMON_CLK_QCOM
>  	help
>  	  Support for the Krait ACC and GCC clock controllers. Say Y
>  	  if you want to support CPU frequency scaling on devices such
> @@ -320,8 +290,9 @@ config KPSS_XCC
>  
>  config KRAITCC
>  	tristate "Krait Clock Controller"
> -	depends on COMMON_CLK_QCOM && ARM
>  	select KRAIT_CLOCKS
>  	help
>  	  Support for the Krait CPU clocks on Qualcomm devices.
>  	  Say Y if you want to support CPU frequency scaling.
> +
> +endif
> -- 
> Sent by a computer through tubes
> 

Powered by blists - more mailing lists