| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 22 Nov 2018 16:14:58 +0800
From: Zhang Rui <rui.zhang@...el.com>
To: Daniel Lezcano <daniel.lezcano@...aro.org>,
Andy Tang <andy.tang@....com>,
"edubezval@...il.com" <edubezval@...il.com>
Cc: "linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3] thermal: qoriq: add multiple sensors support
On 三, 2018-11-21 at 09:43 +0100, Daniel Lezcano wrote:
> On 21/11/2018 02:34, Andy Tang wrote:
> >
> > Hi all,
> >
> > Do you have any comments on this patch?
> >
> > I found for our thermal driver(qoriq_thermal.c) there are different
> > between the following two git trees:
> > git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
> > branch: next
> > git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-
> > thermal.git.
> > branch: next
> >
> > Could you please clarify which git tree/branch should I use?
> SoC changes are submitted against linux-soc-thermal.git.
>
> Generic thermal framework are sent against Zhang Rui's tree but it
> happens sometimes Eduardo pick them also when the changes are related
> to
> SoC behavior.
>
> However, I agree that can be confusing :)
>
In the beginning, for soc thermal driver changes, I used to take them
with Acked-by/Reviewed-by from Eduardo or the driver maintainers.
Later, we have Eduardo to take the soc-thermal patches and send me pull
request so that I can merge them altogether before merge window.
Recently, we started to send separate pull requests to see how it goes.
So to make it easier, I agree we'd better stick with one tree.
thanks,
rui
> Eduardo, Rui,
>
> how about to add a section in the maintainer handbook for the thermal
> to
> clarify the expectations and the flow?
>
> >
> > >
> > > -----Original Message-----
> > > From: Andy Tang
> > > Sent: 2018年11月14日 15:29
> > > To: rui.zhang@...el.com; daniel.lezcano@...aro.org
> > > Cc: edubezval@...il.com; linux-pm@...r.kernel.org;
> > > linux-kernel@...r.kernel.org
> > > Subject: RE: [PATCH v3] thermal: qoriq: add multiple sensors
> > > support
> > >
> > > PING.
> > >
> > > BR,
> > > Andy
> > >
> > > >
> > > > -----Original Message-----
> > > > From: andy.tang@....com <andy.tang@....com>
> > > > Sent: 2018年10月30日 9:00
> > > > To: rui.zhang@...el.com; daniel.lezcano@...aro.org
> > > > Cc: edubezval@...il.com; linux-pm@...r.kernel.org;
> > > > linux-kernel@...r.kernel.org; Andy Tang <andy.tang@....com>
> > > > Subject: [PATCH v3] thermal: qoriq: add multiple sensors
> > > > support
> > > >
> > > > From: Yuantian Tang <andy.tang@....com>
> > > >
> > > > The QorIQ Layerscape SoC has several thermal sensors but the
> > > > current
> > > > driver only supports one.
> > > >
> > > > Massage the code to be sensor oriented and allow the support
> > > > for
> > > > multiple sensors.
> > > >
> > > > Signed-off-by: Yuantian Tang <andy.tang@....com>
> > > > Reviewed-by: Daniel Lezcano <daniel.lezcano@...aro.org>
> > > > ---
> > > > v3:
> > > > - add Reviewed-by
> > > > v2:
> > > > - update the commit message
> > > > - refine the qoriq_tmu_register_tmu_zone()
> > > >
> > > > drivers/thermal/qoriq_thermal.c | 100
> > > > ++++++++++++++++++---------------------
> > > > 1 files changed, 46 insertions(+), 54 deletions(-)
> > > >
> > > > diff --git a/drivers/thermal/qoriq_thermal.c
> > > > b/drivers/thermal/qoriq_thermal.c index 450ed66..8beb344 100644
> > > > --- a/drivers/thermal/qoriq_thermal.c
> > > > +++ b/drivers/thermal/qoriq_thermal.c
> > > > @@ -59,14 +59,21 @@ struct qoriq_tmu_regs {
> > > > u32 ttr3cr; /* Temperature Range 3
> > > > Control Register */
> > > > };
> > > >
> > > > +struct qoriq_tmu_data;
> > > > +
> > > > /*
> > > > * Thermal zone data
> > > > */
> > > > +struct qoriq_sensor {
> > > > + struct thermal_zone_device *tzd;
> > > > + struct qoriq_tmu_data *qdata;
> > > > + int id;
> > > > +};
> > > > +
> > > > struct qoriq_tmu_data {
> > > > - struct thermal_zone_device *tz;
> > > > struct qoriq_tmu_regs __iomem *regs;
> > > > - int sensor_id;
> > > > bool little_endian;
> > > > + struct qoriq_sensor *sensor[SITES_MAX];
> > > > };
> > > >
> > > > static void tmu_write(struct qoriq_tmu_data *p, u32 val, void
> > > > __iomem
> > > > *addr) @@ -87,48 +94,51 @@ static u32 tmu_read(struct
> > > qoriq_tmu_data
> > > >
> > > > *p, void __iomem *addr)
> > > >
> > > > static int tmu_get_temp(void *p, int *temp) {
> > > > + struct qoriq_sensor *qsensor = p;
> > > > + struct qoriq_tmu_data *qdata = qsensor->qdata;
> > > > u32 val;
> > > > - struct qoriq_tmu_data *data = p;
> > > >
> > > > - val = tmu_read(data, &data->regs->site[data-
> > > > >sensor_id].tritsr);
> > > > + val = tmu_read(qdata, &qdata->regs->site[qsensor-
> > > > >id].tritsr);
> > > > *temp = (val & 0xff) * 1000;
> > > >
> > > > return 0;
> > > > }
> > > >
> > > > -static int qoriq_tmu_get_sensor_id(void)
> > > > +static const struct thermal_zone_of_device_ops tmu_tz_ops = {
> > > > + .get_temp = tmu_get_temp,
> > > > +};
> > > > +
> > > > +static int qoriq_tmu_register_tmu_zone(struct platform_device
> > > > *pdev)
> > > > {
> > > > - int ret, id;
> > > > - struct of_phandle_args sensor_specs;
> > > > - struct device_node *np, *sensor_np;
> > > > + struct qoriq_tmu_data *qdata =
> > > > platform_get_drvdata(pdev);
> > > > + int id, sites = 0;
> > > >
> > > > - np = of_find_node_by_name(NULL, "thermal-zones");
> > > > - if (!np)
> > > > - return -ENODEV;
> > > > + for (id = 0; id < SITES_MAX; id++) {
> > > > + qdata->sensor[id] = devm_kzalloc(&pdev->dev,
> > > > + sizeof(struct qoriq_sensor),
> > > > GFP_KERNEL);
> > > > + if (!qdata->sensor[id])
> > > > + return -ENOMEM;
> > > >
> > > > - sensor_np = of_get_next_child(np, NULL);
> > > > - ret = of_parse_phandle_with_args(sensor_np, "thermal-
> > > > sensors",
> > > > - "#thermal-sensor-cells",
> > > > - 0, &sensor_specs);
> > > > - if (ret) {
> > > > - of_node_put(np);
> > > > - of_node_put(sensor_np);
> > > > - return ret;
> > > > - }
> > > > + qdata->sensor[id]->id = id;
> > > > + qdata->sensor[id]->qdata = qdata;
> > > >
> > > > - if (sensor_specs.args_count >= 1) {
> > > > - id = sensor_specs.args[0];
> > > > - WARN(sensor_specs.args_count > 1,
> > > > - "%s: too many cells in sensor
> > > > specifier %d\n",
> > > > - sensor_specs.np->name,
> > > > sensor_specs.args_count);
> > > > - } else {
> > > > - id = 0;
> > > > - }
> > > > + qdata->sensor[id]->tzd =
> > > > devm_thermal_zone_of_sensor_register(
> > > > + &pdev->dev, id, qdata-
> > > > >sensor[id], &tmu_tz_ops);
> > > > + if (IS_ERR(qdata->sensor[id]->tzd)) {
> > > > + if (PTR_ERR(qdata->sensor[id]->tzd) ==
> > > > -ENODEV)
> > > > + continue;
> > > > + else
> > > > + return PTR_ERR(qdata-
> > > > >sensor[id]->tzd);
> > > >
> > > > - of_node_put(np);
> > > > - of_node_put(sensor_np);
> > > > + }
> > > > +
> > > > + sites |= 0x1 << (15 - id);
> > > > + }
> > > > + /* Enable monitoring */
> > > > + if (sites != 0)
> > > > + tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
> > > > &qdata->regs->tmr);
> > > >
> > > > - return id;
> > > > + return 0;
> > > > }
> > > >
> > > > static int qoriq_tmu_calibration(struct platform_device *pdev)
> > > > @@
> > > > -178,16 +188,11 @@ static void qoriq_tmu_init_device(struct
> > > > qoriq_tmu_data *data)
> > > > tmu_write(data, TMR_DISABLE, &data->regs->tmr); }
> > > >
> > > > -static const struct thermal_zone_of_device_ops tmu_tz_ops = {
> > > > - .get_temp = tmu_get_temp,
> > > > -};
> > > > -
> > > > static int qoriq_tmu_probe(struct platform_device *pdev) {
> > > > int ret;
> > > > struct qoriq_tmu_data *data;
> > > > struct device_node *np = pdev->dev.of_node;
> > > > - u32 site;
> > > >
> > > > if (!np) {
> > > > dev_err(&pdev->dev, "Device OF-Node is NULL");
> > > > @@ -203,13
> > > > +208,6 @@ static int qoriq_tmu_probe(struct platform_device
> > > > *pdev)
> > > >
> > > > data->little_endian = of_property_read_bool(np,
> > > > "little-endian");
> > > >
> > > > - data->sensor_id = qoriq_tmu_get_sensor_id();
> > > > - if (data->sensor_id < 0) {
> > > > - dev_err(&pdev->dev, "Failed to get sensor
> > > > id\n");
> > > > - ret = -ENODEV;
> > > > - goto err_iomap;
> > > > - }
> > > > -
> > > > data->regs = of_iomap(np, 0);
> > > > if (!data->regs) {
> > > > dev_err(&pdev->dev, "Failed to get memory
> > > > region\n"); @@
> > > > -223,19 +221,13 @@ static int qoriq_tmu_probe(struct
> > > > platform_device
> > > > *pdev)
> > > > if (ret < 0)
> > > > goto err_tmu;
> > > >
> > > > - data->tz = devm_thermal_zone_of_sensor_register(&pdev-
> > > > >dev,
> > > > - data-
> > > > >sensor_id,
> > > > - data,
> > > > &tmu_tz_ops);
> > > > - if (IS_ERR(data->tz)) {
> > > > - ret = PTR_ERR(data->tz);
> > > > - dev_err(&pdev->dev,
> > > > - "Failed to register thermal zone
> > > > device %d\n", ret);
> > > > - goto err_tmu;
> > > > + ret = qoriq_tmu_register_tmu_zone(pdev);
> > > > + if (ret < 0) {
> > > > + dev_err(&pdev->dev, "Failed to register
> > > > sensors\n");
> > > > + ret = -ENODEV;
> > > > + goto err_iomap;
> > > > }
> > > >
> > > > - /* Enable monitoring */
> > > > - site = 0x1 << (15 - data->sensor_id);
> > > > - tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs-
> > > > >tmr);
> > > >
> > > > return 0;
> > > >
> > > > --
> > > > 1.7.1
>
Powered by blists - more mailing lists