linux-kernel - Re: [PATCH v1 1/2] ARM: dts: sun8i: Add board dts file for t3-cqa3t-bv3.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20181122081909.2u3kt3ih5ma2dl2y@flea>
Date:   Thu, 22 Nov 2018 09:19:09 +0100
From:   Maxime Ripard <maxime.ripard@...tlin.com>
To:     Hao Zhang <hao5781286@...il.com>
Cc:     robh+dt@...nel.org, wens@...e.org, icenowy@...c.io,
        linux-doc@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        linux-clk@...r.kernel.org, linux-gpio@...r.kernel.org,
        linux-sunxi@...glegroups.com
Subject: Re: [PATCH v1 1/2] ARM: dts: sun8i: Add board dts file for
 t3-cqa3t-bv3.

On Wed, Nov 21, 2018 at 11:43:57PM +0800, Hao Zhang wrote:
> The T3/R40/V40 using the same sdk and config file in allwinner
> sdk, it seem they are the same SOC just with different name, so
> compatible with R40.
> 
> The t3-cqa3t-bv3 based on Allwinner T3 SoC, it has various connectors,
> leds, buttons, and sell on:
> https://item.taobao.com/item.htm?spm=2013.1.w4023-4203040713.25.62704cce7UCgLS&id=557154455330
> 
> It features:
>  - X-Powers AXP221s PMIC connected to i2c0
>  - 1/2 GB DDR3 DRAM
>  - 8 GB eMMC
>  - 2x USB 2.0 hosts
>  - 1x USB 2.0 OTG
>  - 2 LVDS connectors
>  - 24 bit RGB LCD connector
>  - HDMI output
>  - DVP camera interface (support 500w cmos camera)
>  - GPIO connectors
>  - 5 TTL uarts and 2 RS232 uarts
>  - 1 RS485 connector
>  - support i2c capacitive tp and usb infrared tp
>  - boot control, reset and user buttons
>  - 3.5mm headphone and 3.5mm mic jack
>  - 100M RJ45
>  - micro SD card slot
>  - DC power jack
>  - RCT power slot
>  - 1 CVBS TVIN
>  - 1 CVBS TVOUT
>  - 2 customer leds
>  - 1 buzzer
>  - 1 minipcie
>  - I2C output
>  - SPI output
>  - PCM output
>  - wifi and bt connector reserved.
> 
> Board info can find here:
> https://github.com/Axl-zhang/Allwinner-V40-T3-R40-manual
> 
> Signed-off-by: Hao Zhang <hao5781286@...il.com>

Applied both patches, thanks!
Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)