| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1880382.AeP59NOuia@avalon>
Date: Fri, 23 Nov 2018 16:25:39 +0200
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Neil Armstrong <narmstrong@...libre.com>
Cc: architt@...eaurora.org, a.hajda@...sung.com,
dri-devel@...ts.freedesktop.org, linux-amlogic@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Nickey Yang <nickey.yang@...k-chips.com>,
Huicong Xu <xhc@...k-chips.com>
Subject: Re: [PATCH RFC 1/8] drm/bridge: dw-hdmi: Add SCDC and TMDS Scrambling support
Hi Neil,
Thank you for the patch.
On Friday, 23 November 2018 16:02:14 EET Neil Armstrong wrote:
> Add support for SCDC Setup for TMDS Clock > 3.4GHz and enable TMDS
> Scrambling when supported or mandatory.
>
> This patch also adds an helper to setup the control bit to support
> the hight TMDS Bit Period/TMDS Clock-Period Ratio as required with
s/hight/high/ ?
> TMDS Clock > 3.4GHz for HDMI2.0 3840x2160@...50 modes.
Why do you need a helper for this, is there no way it could be handled
internally ?
> These changes were based on work done by Huicong Xu <xhc@...k-chips.com>
> and Nickey Yang <nickey.yang@...k-chips.com> to support HDMI2.0 modes
> on the Rockchip 4.4 BSP kernel at [1]
>
> [1] https://github.com/rockchip-linux/kernel/tree/release-4.4
>
> Cc: Nickey Yang <nickey.yang@...k-chips.com>
> Cc: Huicong Xu <xhc@...k-chips.com>
> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 45 +++++++++++++++++++++--
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 1 +
> include/drm/bridge/dw_hdmi.h | 1 +
> 3 files changed, 44 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index
> 5971976284bf..523508af70b0 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -28,6 +28,7 @@
> #include <drm/drm_crtc_helper.h>
> #include <drm/drm_edid.h>
> #include <drm/drm_encoder_slave.h>
> +#include <drm/drm_scdc_helper.h>
> #include <drm/bridge/dw_hdmi.h>
>
> #include <uapi/linux/media-bus-format.h>
> @@ -1015,6 +1016,20 @@ void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi,
> unsigned short data, }
> EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_write);
>
> +void dw_hdmi_set_high_tmds_clock_ratio(struct dw_hdmi *hdmi)
> +{
> + unsigned long mtmdsclock = hdmi->hdmi_data.video_mode.mpixelclock;
> +
> + /* Control for TMDS Bit Period/TMDS Clock-Period Ratio */
> + if (hdmi->connector.display_info.hdmi.scdc.supported) {
> + if (mtmdsclock > 340000000)
You use the 3.4GHz frequency in a few places, how about creating a macro ?
> + drm_scdc_set_high_tmds_clock_ratio(hdmi->ddc, 1);
> + else
> + drm_scdc_set_high_tmds_clock_ratio(hdmi->ddc, 0);
> + }
> +}
> +EXPORT_SYMBOL_GPL(dw_hdmi_set_high_tmds_clock_ratio);
> +
> static void dw_hdmi_phy_enable_powerdown(struct dw_hdmi *hdmi, bool enable)
> {
> hdmi_mask_writeb(hdmi, !enable, HDMI_PHY_CONF0,
> @@ -1340,11 +1355,12 @@ static void hdmi_tx_hdcp_config(struct dw_hdmi
> *hdmi)
>
> static void hdmi_config_AVI(struct dw_hdmi *hdmi, struct drm_display_mode
> *mode) {
> + bool is_hdmi2_sink = hdmi->connector.display_info.hdmi.scdc.supported;
> struct hdmi_avi_infoframe frame;
> u8 val;
>
> /* Initialise info frame from DRM mode */
> - drm_hdmi_avi_infoframe_from_display_mode(&frame, mode, false);
> + drm_hdmi_avi_infoframe_from_display_mode(&frame, mode, is_hdmi2_sink);
>
> if (hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_out_bus_format))
> frame.colorspace = HDMI_COLORSPACE_YUV444;
> @@ -1503,7 +1519,8 @@ static void
> hdmi_config_vendor_specific_infoframe(struct dw_hdmi *hdmi, static void
> hdmi_av_composer(struct dw_hdmi *hdmi,
> const struct drm_display_mode *mode)
> {
> - u8 inv_val;
> + u8 inv_val, bytes;
> + struct drm_hdmi_info *hdmi_info = &hdmi->connector.display_info.hdmi;
> struct hdmi_vmode *vmode = &hdmi->hdmi_data.video_mode;
> int hblank, vblank, h_de_hs, v_de_vs, hsync_len, vsync_len;
> unsigned int vdisplay;
> @@ -1513,7 +1530,9 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
> dev_dbg(hdmi->dev, "final pixclk = %d\n", vmode->mpixelclock);
>
> /* Set up HDMI_FC_INVIDCONF */
> - inv_val = (hdmi->hdmi_data.hdcp_enable ?
> + inv_val = (hdmi->hdmi_data.hdcp_enable ||
> + vmode->mpixelclock > 340000000 ||
> + hdmi_info->scdc.scrambling.low_rates ?
> HDMI_FC_INVIDCONF_HDCP_KEEPOUT_ACTIVE :
> HDMI_FC_INVIDCONF_HDCP_KEEPOUT_INACTIVE);
>
> @@ -1562,6 +1581,26 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
> vsync_len /= 2;
> }
>
> + /* Scrambling Control */
> + if (hdmi_info->scdc.supported) {
> + if (vmode->mpixelclock > 340000000 ||
> + hdmi_info->scdc.scrambling.low_rates) {
> + drm_scdc_readb(&hdmi->i2c->adap, SCDC_SINK_VERSION,
> + &bytes);
> + drm_scdc_writeb(&hdmi->i2c->adap, SCDC_SOURCE_VERSION,
> + bytes);
Shouldn't the source version be min(sink version, highest supported source
version) ?
> + drm_scdc_set_scrambling(&hdmi->i2c->adap, 1);
> + hdmi_writeb(hdmi, (u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ,
> + HDMI_MC_SWRSTZ);
> + hdmi_writeb(hdmi, 1, HDMI_FC_SCRAMBLER_CTRL);
> + } else {
> + hdmi_writeb(hdmi, 0, HDMI_FC_SCRAMBLER_CTRL);
> + hdmi_writeb(hdmi, (u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ,
> + HDMI_MC_SWRSTZ);
> + drm_scdc_set_scrambling(&hdmi->i2c->adap, 0);
> + }
> + }
> +
> /* Set up horizontal active pixel width */
> hdmi_writeb(hdmi, mode->hdisplay >> 8, HDMI_FC_INHACTV1);
> hdmi_writeb(hdmi, mode->hdisplay, HDMI_FC_INHACTV0);
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h index
> 9d90eb9c46e5..3f3c616eba97 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> @@ -255,6 +255,7 @@
> #define HDMI_FC_MASK2 0x10DA
> #define HDMI_FC_POL2 0x10DB
> #define HDMI_FC_PRCONF 0x10E0
> +#define HDMI_FC_SCRAMBLER_CTRL 0x10E1
>
> #define HDMI_FC_GMD_STAT 0x1100
> #define HDMI_FC_GMD_EN 0x1101
> diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
> index ccb5aa8468e0..d7cc5d094270 100644
> --- a/include/drm/bridge/dw_hdmi.h
> +++ b/include/drm/bridge/dw_hdmi.h
> @@ -156,6 +156,7 @@ void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool
> hpd, bool rx_sense); void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi,
> unsigned int rate); void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
> void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);
> +void dw_hdmi_set_high_tmds_clock_ratio(struct dw_hdmi *hdmi);
>
> /* PHY configuration */
> void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address);
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists