lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 26 Nov 2018 00:18:02 +0800
From:   Hao Zhang <hao5781286@...il.com>
To:     robh+dt@...nel.org, mark.rutland@....com,
        maxime.ripard@...tlin.com, wens@...e.org, mturquette@...libre.com,
        sboyd@...nel.org, thierry.reding@...il.com
Cc:     linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-pwm@...r.kernel.org, linux-sunxi@...glegroups.com,
        hao5781286@...il.com
Subject: [PATCH v3 0/6] PWM support for allwinner sun8i R40/T3/V40 SOCs.

PWM support for allwinner sun8i R40/T3/V40 SOCs.

The sun8i R40/T3/V40 PWM has 8 PWM channals and divides to 4 PWM pairs,
each PWM pair built-in 1 clock module, 2 timer logic module and 1
programmable dead-time generator, it also support waveform capture.
It has 2 clock sources OSC24M and APB1, it is different with the
sun4i-pwm driver, Therefore add a new driver for it.

Some test method:
cd /sys/class/pwm/pwmchip0
echo 0 > export
cd pwm0
echo 1000 > period
echo 500 > duty_cycle
echo 1 > enable
then check the PB2 pin with oscilloscope.

v3 Changes:
1. fix coding format.
2. use 2/ilog2 instead of divide table
3. remove spinlock.
4. remove sun8i_pwm_data structure and use DT to parse pwm-channals  
5. remove inline because complier knows it better.
6. don't hardcode clock source and parse two clock source from dt "mux-0"
   and "mux-1"
7. remove bypass method.
8. add a method to change clock source when mux-0 is not support the
   input period it can change to mux-1.
9. add cycle range check.
10. add some variable to make it more readability.
11. add clk_disable_unprepare when some false accur.

v2 Changes:
1. change sun8i-r40 symbol to sun8i.
2. change pwm0_pin, pwm0-pin to pwm_ch0_pin, pwm-ch0-pin.
3. remove clk_disable_unprepare(), check !match and IS_ERR(pwm->regmap).

Hao Zhang (6):
  Documentation: ARM: sunxi: pwm: add Allwinner sun8i.
  ARM: dtsi: add pwm node for sun8i R40.
  ARM: dts: add PWM for Bananapi M2 Ultrar board.
  DEV: CLK: add function to check the using clock name of driver.
  DEV: CLK: sunxi ccu: export clk_apb1 for sun8i-r40 soc pwm.
  ARM: PWM: add allwinner sun8i R40/T3/V40 PWM support.

 .../devicetree/bindings/pwm/pwm-sun8i.txt          |  24 ++
 arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts  |   6 +
 arch/arm/boot/dts/sun8i-r40.dtsi                   |  17 +
 drivers/clk/clk.c                                  |   6 +
 drivers/clk/sunxi-ng/ccu-sun8i-r40.h               |   4 +-
 drivers/pwm/Kconfig                                |  12 +-
 drivers/pwm/Makefile                               |   1 +
 drivers/pwm/pwm-sun8i.c                            | 418 +++++++++++++++++++++
 include/dt-bindings/clock/sun8i-r40-ccu.h          |   2 +
 include/linux/clk-provider.h                       |   1 +
 10 files changed, 489 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pwm/pwm-sun8i.txt
 create mode 100644 drivers/pwm/pwm-sun8i.c

-- 
2.7.4

Powered by blists - more mailing lists