[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1543216072-9623-2-git-send-email-harini.katakam@xilinx.com>
Date: Mon, 26 Nov 2018 12:37:49 +0530
From: Harini Katakam <harini.katakam@...inx.com>
To: <nicolas.ferre@...rochip.com>, <davem@...emloft.net>,
<claudiu.beznea@...rochip.com>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<michal.simek@...inx.com>, <harinikatakamlinux@...il.com>,
<harini.katakam@...inx.com>, Harini Katakam <harinik@...inx.com>,
Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>,
Sai Pavan Boddu <sai.pavan.boddu@...inx.com>
Subject: [PATCH v2 1/4] net: macb: Check MDIO state before read/write and use timeouts
From: Harini Katakam <harinik@...inx.com>
Replace the while loop in MDIO read/write functions with a timeout.
In addition, add a check for MDIO bus busy before initiating a new
operation as well to make sure there is no ongoing MDIO operation.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@...inx.com>
Signed-off-by: Harini Katakam <harinik@...inx.com>
---
v2 changes:
Use readx_poll_timeout
Changes form RFC:
Cleaned up timeout implementation and moved it to a helper.
drivers/net/ethernet/cadence/macb.h | 3 +++
drivers/net/ethernet/cadence/macb_main.c | 33 ++++++++++++++++++++++++++------
2 files changed, 30 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 3d45f4c..df7bee1 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -714,6 +714,9 @@
__v; \
})
+#define MACB_IDLE_MASK (1 << MACB_IDLE_OFFSET)
+#define MACB_READ_NSR(bp) macb_readl(bp, NSR)
+
/* struct macb_dma_desc - Hardware DMA descriptor
* @addr: DMA address of data buffer
* @ctrl: Control and status bits
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 1d86b4d..fd86ece 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -36,6 +36,7 @@
#include <linux/ip.h>
#include <linux/udp.h>
#include <linux/tcp.h>
+#include <linux/iopoll.h>
#include "macb.h"
#define MACB_RX_BUFFER_SIZE 128
@@ -79,6 +80,8 @@
*/
#define MACB_HALT_TIMEOUT 1230
+#define MACB_MDIO_TIMEOUT 1000000 /* in usecs */
+
/* DMA buffer descriptor might be different size
* depends on hardware configuration:
*
@@ -318,10 +321,23 @@ static void macb_get_hwaddr(struct macb *bp)
eth_hw_addr_random(bp->dev);
}
+static int macb_mdio_wait_for_idle(struct macb *bp)
+{
+ u32 val;
+
+ return readx_poll_timeout(MACB_READ_NSR, bp, val, val & MACB_IDLE_MASK,
+ 1, MACB_MDIO_TIMEOUT);
+}
+
static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
{
struct macb *bp = bus->priv;
int value;
+ int err;
+
+ err = macb_mdio_wait_for_idle(bp);
+ if (err < 0)
+ return err;
macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
| MACB_BF(RW, MACB_MAN_READ)
@@ -329,9 +345,9 @@ static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
| MACB_BF(REGA, regnum)
| MACB_BF(CODE, MACB_MAN_CODE)));
- /* wait for end of transfer */
- while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
- cpu_relax();
+ err = macb_mdio_wait_for_idle(bp);
+ if (err < 0)
+ return err;
value = MACB_BFEXT(DATA, macb_readl(bp, MAN));
@@ -342,6 +358,11 @@ static int macb_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
u16 value)
{
struct macb *bp = bus->priv;
+ int err;
+
+ err = macb_mdio_wait_for_idle(bp);
+ if (err < 0)
+ return err;
macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
| MACB_BF(RW, MACB_MAN_WRITE)
@@ -350,9 +371,9 @@ static int macb_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
| MACB_BF(CODE, MACB_MAN_CODE)
| MACB_BF(DATA, value)));
- /* wait for end of transfer */
- while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
- cpu_relax();
+ err = macb_mdio_wait_for_idle(bp);
+ if (err < 0)
+ return err;
return 0;
}
--
2.7.4
Powered by blists - more mailing lists