| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1543218769-5507-16-git-send-email-rogerq@ti.com>
Date: Mon, 26 Nov 2018 09:52:48 +0200
From: Roger Quadros <rogerq@...com>
To: <ohad@...ery.com>, <bjorn.andersson@...aro.org>
CC: <tony@...mide.com>, <robh+dt@...nel.org>, <bcousson@...libre.com>,
<ssantosh@...nel.org>, <s-anna@...com>, <nsekhar@...com>,
<t-kristo@...com>, <nsaulnier@...com>, <jreeder@...com>,
<m-karicheri2@...com>, <woods.technical@...il.com>,
<linux-omap@...r.kernel.org>, <linux-remoteproc@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<rogerq@...com>
Subject: [PATCH 15/16] remoteproc/pru: add support for parsing pru interrupt mapping from DT
From: Tero Kristo <t-kristo@...com>
PRU interrupt mapping can now be parsed from devicetree also, from
ti,pru-interrupt-map property. This is an alternative configuration
method in addition to the legacy resource table config. If both are
provided, the config in DT takes precedence.
Signed-off-by: Tero Kristo <t-kristo@...com>
[s-anna@...com: various fixes and cleanups]
Signed-off-by: Suman Anna <s-anna@...com>
Signed-off-by: Roger Quadros <rogerq@...com>
---
drivers/remoteproc/pru_rproc.c | 109 +++++++++++++++++++++++++++++++++++++++--
1 file changed, 106 insertions(+), 3 deletions(-)
diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
index 84f006b..540cce3 100644
--- a/drivers/remoteproc/pru_rproc.c
+++ b/drivers/remoteproc/pru_rproc.c
@@ -63,6 +63,7 @@ enum pru_mem {
* @irq_ring: IRQ number to use for processing vring buffers
* @irq_kick: IRQ number to use to perform virtio kick
* @mem_regions: data for each of the PRU memory regions
+ * @intc_config: PRU INTC configuration data
* @dram0: PRUSS DRAM0 region
* @dram1: PRUSS DRAM1 region
* @shrdram: PRUSS SHARED RAM region
@@ -73,6 +74,7 @@ enum pru_mem {
* @shrdram_da: device address of shared Data RAM
* @fw_name: name of firmware image used during loading
* @gpmux_save: saved value for gpmux config
+ * @dt_irqs: number of irqs configured from DT
* @lock: mutex to protect client usage
* @dbg_single_step: debug state variable to set PRU into single step mode
* @dbg_continuous: debug state variable to restore PRU execution mode
@@ -87,6 +89,7 @@ struct pru_rproc {
int irq_vring;
int irq_kick;
struct pruss_mem_region mem_regions[PRU_MEM_MAX];
+ struct pruss_intc_config intc_config;
struct pruss_mem_region dram0;
struct pruss_mem_region dram1;
struct pruss_mem_region shrdram;
@@ -97,6 +100,7 @@ struct pru_rproc {
u32 shrdram_da;
const char *fw_name;
u8 gpmux_save;
+ int dt_irqs;
struct mutex lock; /* client access lock */
u32 dbg_single_step;
u32 dbg_continuous;
@@ -180,6 +184,87 @@ static struct rproc *__pru_rproc_get(struct device_node *np, int index)
return rproc;
}
+static int pru_get_intc_dt_config(struct device *dev, const char *propname,
+ int index,
+ struct pruss_intc_config *intc_config)
+{
+ struct device_node *np = dev->of_node;
+ struct property *prop;
+ int ret = 0, entries, i;
+ int dt_irqs = 0;
+ u32 *arr;
+ int max_system_events, max_pru_channels, max_pru_host_ints;
+
+ max_system_events = MAX_PRU_SYS_EVENTS;
+ max_pru_channels = MAX_PRU_CHANNELS;
+ max_pru_host_ints = MAX_PRU_CHANNELS;
+
+ prop = of_find_property(np, propname, NULL);
+ if (!prop)
+ return 0;
+
+ entries = of_property_count_u32_elems(np, propname);
+ if (entries <= 0 || entries % 4)
+ return -EINVAL;
+
+ arr = kmalloc_array(entries, sizeof(u32), GFP_KERNEL);
+ if (!arr)
+ return -ENOMEM;
+
+ ret = of_property_read_u32_array(np, propname, arr, entries);
+ if (ret)
+ return -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(intc_config->sysev_to_ch); i++)
+ intc_config->sysev_to_ch[i] = -1;
+
+ for (i = 0; i < ARRAY_SIZE(intc_config->ch_to_host); i++)
+ intc_config->ch_to_host[i] = -1;
+
+ for (i = 0; i < entries; i += 4) {
+ if (arr[i] != index)
+ continue;
+
+ if (arr[i + 1] < 0 ||
+ arr[i + 1] >= max_system_events) {
+ dev_dbg(dev, "bad sys event %d\n", arr[i + 1]);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (arr[i + 2] < 0 ||
+ arr[i + 2] >= max_pru_channels) {
+ dev_dbg(dev, "bad channel %d\n", arr[i + 2]);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (arr[i + 3] < 0 ||
+ arr[i + 3] >= max_pru_host_ints) {
+ dev_dbg(dev, "bad irq %d\n", arr[i + 3]);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ intc_config->sysev_to_ch[arr[i + 1]] = arr[i + 2];
+ dev_dbg(dev, "sysevt-to-ch[%d] -> %d\n", arr[i + 1],
+ arr[i + 2]);
+
+ intc_config->ch_to_host[arr[i + 2]] = arr[i + 3];
+ dev_dbg(dev, "chnl-to-host[%d] -> %d\n", arr[i + 2],
+ arr[i + 3]);
+
+ dt_irqs++;
+ }
+
+ kfree(arr);
+ return dt_irqs;
+
+err:
+ kfree(arr);
+ return ret;
+}
+
/**
* pru_rproc_get() - get the PRU rproc instance from a device node
* @np: the user/client device node
@@ -251,6 +336,15 @@ struct rproc *pru_rproc_get(struct device_node *np, int index)
}
}
+ ret = pru_get_intc_dt_config(dev, "ti,pru-interrupt-map",
+ index, &pru->intc_config);
+ if (ret < 0) {
+ dev_err(dev, "error getting DT interrupt map: %d\n", ret);
+ goto err;
+ }
+
+ pru->dt_irqs = ret;
+
return rproc;
err:
@@ -568,7 +662,13 @@ static int pru_rproc_start(struct rproc *rproc)
dev_dbg(dev, "starting PRU%d: entry-point = 0x%x\n",
pru->id, (rproc->bootaddr >> 2));
- /* TODO: INTC setup */
+ if (pru->dt_irqs) {
+ ret = pruss_intc_configure(pru->pruss, &pru->intc_config);
+ if (ret) {
+ dev_err(dev, "failed to configure intc %d\n", ret);
+ return ret;
+ }
+ }
if (!list_empty(&pru->rproc->rvdevs)) {
if (!pru->mbox && (pru->irq_vring <= 0 || pru->irq_kick <= 0)) {
@@ -596,7 +696,8 @@ static int pru_rproc_start(struct rproc *rproc)
return 0;
fail:
- /* TODO: INTC cleanup */
+ if (pru->dt_irqs)
+ pruss_intc_unconfigure(pru->pruss, &pru->intc_config);
return ret;
}
@@ -618,7 +719,9 @@ static int pru_rproc_stop(struct rproc *rproc)
!pru->mbox && pru->irq_vring > 0)
free_irq(pru->irq_vring, pru);
- /* TODO: INTC cleanup */
+ /* undo INTC config */
+ if (pru->dt_irqs)
+ pruss_intc_unconfigure(pru->pruss, &pru->intc_config);
return 0;
}
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Powered by blists - more mailing lists