linux-kernel - [PATCH linux-next 03/10] dt-bindings: net: ti: cpsw: switch to use phy-gmii-sel phy

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20181126001531.12974-4-grygorii.strashko@ti.com>
Date:   Sun, 25 Nov 2018 18:15:24 -0600
From:   Grygorii Strashko <grygorii.strashko@...com>
To:     "David S. Miller" <davem@...emloft.net>,
        Tony Lindgren <tony@...mide.com>,
        Kishon Vijay Abraham I <kishon@...com>,
        Rob Herring <robh+dt@...nel.org>
CC:     <netdev@...r.kernel.org>, Sekhar Nori <nsekhar@...com>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        Andrew Lunn <andrew@...n.ch>, <devicetree@...r.kernel.org>,
        <linux-omap@...r.kernel.org>,
        Grygorii Strashko <grygorii.strashko@...com>
Subject: [PATCH linux-next 03/10] dt-bindings: net: ti: cpsw: switch to use phy-gmii-sel phy

The cpsw-phy-sel driver was replaced with new PHY driver phy-gmii-sel, so
deprecate cpsw-phy-sel bindings and update CPSW binding to use phy-gmii-sel
PHY bindings.

Cc: Kishon Vijay Abraham I <kishon@...com>
Cc: Tony Lindgren <tony@...mide.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
---
 Documentation/devicetree/bindings/net/cpsw.txt | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index b3acebe..3264e19 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -22,7 +22,8 @@ Required properties:
 - cpsw-phy-sel		: Specifies the phandle to the CPSW phy mode selection
 			  device. See also cpsw-phy-sel.txt for it's binding.
 			  Note that in legacy cases cpsw-phy-sel may be
-			  a child device instead of a phandle.
+			  a child device instead of a phandle
+			  (DEPRECATED, use phys property instead).
 
 Optional properties:
 - ti,hwmods		: Must be "cpgmac0"
@@ -44,6 +45,7 @@ Optional properties:
 Slave Properties:
 Required properties:
 - phy-mode		: See ethernet.txt file in the same directory
+- phys			: phandle on phy-gmii-sel PHY (see phy/ti-phy-gmii-sel.txt)
 
 Optional properties:
 - dual_emac_res_vlan	: Specifies VID to be used to segregate the ports
@@ -85,12 +87,14 @@ Examples:
 			phy-mode = "rgmii-txid";
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
+			phys = <&phy_gmii_sel 1 0>;
 		};
 		cpsw_emac1: slave@1 {
 			phy_id = <&davinci_mdio>, <1>;
 			phy-mode = "rgmii-txid";
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
+			phys = <&phy_gmii_sel 2 0>;
 		};
 	};
 
@@ -114,11 +118,13 @@ Examples:
 			phy-mode = "rgmii-txid";
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
+			phys = <&phy_gmii_sel 1 0>;
 		};
 		cpsw_emac1: slave@1 {
 			phy_id = <&davinci_mdio>, <1>;
 			phy-mode = "rgmii-txid";
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
+			phys = <&phy_gmii_sel 2 0>;
 		};
 	};
-- 
2.10.5