lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20181126001531.12974-11-grygorii.strashko@ti.com>
Date:   Sun, 25 Nov 2018 18:15:31 -0600
From:   Grygorii Strashko <grygorii.strashko@...com>
To:     "David S. Miller" <davem@...emloft.net>,
        Tony Lindgren <tony@...mide.com>,
        Kishon Vijay Abraham I <kishon@...com>,
        Rob Herring <robh+dt@...nel.org>
CC:     <netdev@...r.kernel.org>, Sekhar Nori <nsekhar@...com>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        Andrew Lunn <andrew@...n.ch>, <devicetree@...r.kernel.org>,
        <linux-omap@...r.kernel.org>,
        Grygorii Strashko <grygorii.strashko@...com>
Subject: [PATCH linux-next 10/10] net: ethernet: ti: cpsw: deprecate cpsw-phy-sel driver

Deprecate cpsw-phy-sel driver as it's been replaced with new
TI phy-gmii-sel PHY driver.

Cc: Kishon Vijay Abraham I <kishon@...com>
Cc: Tony Lindgren <tony@...mide.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
---
 drivers/net/ethernet/ti/Kconfig | 6 +++---
 drivers/net/ethernet/ti/cpsw.h  | 6 ++++++
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index f932923..96415da 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -49,10 +49,11 @@ config TI_DAVINCI_CPDMA
 	  will be called davinci_cpdma.  This is recommended.
 
 config TI_CPSW_PHY_SEL
-	bool
+	bool "TI CPSW Phy mode Selection (DEPRECATED)"
+	default n
 	---help---
 	  This driver supports configuring of the phy mode connected to
-	  the CPSW.
+	  the CPSW. DEPRECATED: use PHY_TI_GMII_SEL.
 
 config TI_CPSW_ALE
 	tristate "TI CPSW ALE Support"
@@ -64,7 +65,6 @@ config TI_CPSW
 	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST
 	select TI_DAVINCI_CPDMA
 	select TI_DAVINCI_MDIO
-	select TI_CPSW_PHY_SEL
 	select TI_CPSW_ALE
 	select MFD_SYSCON
 	select REGMAP
diff --git a/drivers/net/ethernet/ti/cpsw.h b/drivers/net/ethernet/ti/cpsw.h
index cf111db..907e05fc 100644
--- a/drivers/net/ethernet/ti/cpsw.h
+++ b/drivers/net/ethernet/ti/cpsw.h
@@ -21,7 +21,13 @@
 			 ((mac)[2] << 16) | ((mac)[3] << 24))
 #define mac_lo(mac)	(((mac)[4] << 0) | ((mac)[5] << 8))
 
+#if IS_ENABLED(CONFIG_TI_CPSW_PHY_SEL)
 void cpsw_phy_sel(struct device *dev, phy_interface_t phy_mode, int slave);
+#else
+static inline
+void cpsw_phy_sel(struct device *dev, phy_interface_t phy_mode, int slave)
+{}
+#endif
 int ti_cm_get_macid(struct device *dev, int slave, u8 *mac_addr);
 
 #endif /* __CPSW_H__ */
-- 
2.10.5

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ