| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20181127055429.251614-8-minchan@kernel.org>
Date: Tue, 27 Nov 2018 14:54:29 +0900
From: Minchan Kim <minchan@...nel.org>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: LKML <linux-kernel@...r.kernel.org>,
Sergey Senozhatsky <sergey.senozhatsky.work@...il.com>,
Joey Pabalinas <joeypabalinas@...il.com>,
Minchan Kim <minchan@...nel.org>
Subject: [PATCH v3 7/7] zram: writeback throttle
On small memory system, there are lots of write IO so if we use
flash device as swap, there would be serious flash wearout.
To overcome the problem, system developers need to design write
limitation strategy to guarantee flash health for entire product life.
This patch creates a new konb "writeback_limit" on zram. With that,
if current writeback IO count(/sys/block/zramX/io_stat) excceds
the limitation, zram stops further writeback until admin can reset
the limit.
Signed-off-by: Minchan Kim <minchan@...nel.org>
---
Documentation/ABI/testing/sysfs-block-zram | 9 +++++
Documentation/blockdev/zram.txt | 2 +
drivers/block/zram/zram_drv.c | 47 +++++++++++++++++++++-
drivers/block/zram/zram_drv.h | 2 +
4 files changed, 59 insertions(+), 1 deletion(-)
diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram
index 65fc33b2f53b..9d2339a485c8 100644
--- a/Documentation/ABI/testing/sysfs-block-zram
+++ b/Documentation/ABI/testing/sysfs-block-zram
@@ -121,3 +121,12 @@ Contact: Minchan Kim <minchan@...nel.org>
The bd_stat file is read-only and represents backing device's
statistics (bd_count, bd_reads, bd_writes) in a format
similar to block layer statistics file format.
+
+What: /sys/block/zram<id>/writeback_limit
+Date: November 2018
+Contact: Minchan Kim <minchan@...nel.org>
+Description:
+ The writeback_limit file is read-write and specifies the maximum
+ amount of writeback ZRAM can do. The limit could be changed
+ in run time and "0" means disable the limit.
+ No limit is the initial state.
diff --git a/Documentation/blockdev/zram.txt b/Documentation/blockdev/zram.txt
index 906df97527a7..64b61925e475 100644
--- a/Documentation/blockdev/zram.txt
+++ b/Documentation/blockdev/zram.txt
@@ -164,6 +164,8 @@ reset WO trigger device reset
mem_used_max WO reset the `mem_used_max' counter (see later)
mem_limit WO specifies the maximum amount of memory ZRAM can use
to store the compressed data
+writeback_limit WO specifies the maximum amount of write IO zram can
+ write out to backing device as 4KB unit
max_comp_streams RW the number of possible concurrent compress operations
comp_algorithm RW show and change the compression algorithm
compact WO trigger memory compaction
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index 67168a6ecca6..58b025c5c83e 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -330,6 +330,40 @@ static ssize_t idle_store(struct device *dev,
}
#ifdef CONFIG_ZRAM_WRITEBACK
+
+static ssize_t writeback_limit_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len)
+{
+ struct zram *zram = dev_to_zram(dev);
+ u64 val;
+ ssize_t ret = -EINVAL;
+
+ if (kstrtoull(buf, 10, &val))
+ return ret;
+
+ down_read(&zram->init_lock);
+ atomic64_set(&zram->stats.bd_wb_limit, val);
+ if (val == 0 || val > atomic64_read(&zram->stats.bd_writes))
+ zram->stop_writeback = false;
+ up_read(&zram->init_lock);
+ ret = len;
+
+ return ret;
+}
+
+static ssize_t writeback_limit_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ u64 val;
+ struct zram *zram = dev_to_zram(dev);
+
+ down_read(&zram->init_lock);
+ val = atomic64_read(&zram->stats.bd_wb_limit);
+ up_read(&zram->init_lock);
+
+ return scnprintf(buf, PAGE_SIZE, "%llu\n", val);
+}
+
static void reset_bdev(struct zram *zram)
{
struct block_device *bdev;
@@ -571,6 +605,7 @@ static ssize_t writeback_store(struct device *dev,
char mode_buf[8];
unsigned long mode = -1UL;
unsigned long blk_idx = 0;
+ u64 wb_count, wb_limit;
sz = strscpy(mode_buf, buf, sizeof(mode_buf));
if (sz <= 0)
@@ -612,6 +647,11 @@ static ssize_t writeback_store(struct device *dev,
bvec.bv_len = PAGE_SIZE;
bvec.bv_offset = 0;
+ if (zram->stop_writeback) {
+ ret = -EIO;
+ break;
+ }
+
if (!blk_idx) {
blk_idx = alloc_block_bdev(zram);
if (!blk_idx) {
@@ -670,7 +710,7 @@ static ssize_t writeback_store(struct device *dev,
continue;
}
- atomic64_inc(&zram->stats.bd_writes);
+ wb_count = atomic64_inc_return(&zram->stats.bd_writes);
/*
* We released zram_slot_lock so need to check if the slot was
* changed. If there is freeing for the slot, we can catch it
@@ -694,6 +734,9 @@ static ssize_t writeback_store(struct device *dev,
zram_set_element(zram, index, blk_idx);
blk_idx = 0;
atomic64_inc(&zram->stats.pages_stored);
+ wb_limit = atomic64_read(&zram->stats.bd_wb_limit);
+ if (wb_limit != 0 && wb_count >= wb_limit)
+ zram->stop_writeback = true;
next:
zram_slot_unlock(zram, index);
}
@@ -1767,6 +1810,7 @@ static DEVICE_ATTR_RW(comp_algorithm);
#ifdef CONFIG_ZRAM_WRITEBACK
static DEVICE_ATTR_RW(backing_dev);
static DEVICE_ATTR_WO(writeback);
+static DEVICE_ATTR_RW(writeback_limit);
#endif
static struct attribute *zram_disk_attrs[] = {
@@ -1782,6 +1826,7 @@ static struct attribute *zram_disk_attrs[] = {
#ifdef CONFIG_ZRAM_WRITEBACK
&dev_attr_backing_dev.attr,
&dev_attr_writeback.attr,
+ &dev_attr_writeback_limit.attr,
#endif
&dev_attr_io_stat.attr,
&dev_attr_mm_stat.attr,
diff --git a/drivers/block/zram/zram_drv.h b/drivers/block/zram/zram_drv.h
index bc477803530d..4bd3afd15e83 100644
--- a/drivers/block/zram/zram_drv.h
+++ b/drivers/block/zram/zram_drv.h
@@ -86,6 +86,7 @@ struct zram_stats {
atomic64_t bd_count; /* no. of pages in backing device */
atomic64_t bd_reads; /* no. of reads from backing device */
atomic64_t bd_writes; /* no. of writes from backing device */
+ atomic64_t bd_wb_limit; /* writeback limit of backing device */
#endif
};
@@ -113,6 +114,7 @@ struct zram {
*/
bool claim; /* Protected by bdev->bd_mutex */
struct file *backing_dev;
+ bool stop_writeback;
#ifdef CONFIG_ZRAM_WRITEBACK
struct block_device *bdev;
unsigned int old_block_size;
--
2.20.0.rc0.387.gc7a69e6b6c-goog
Powered by blists - more mailing lists