| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20181127055950.GE6163@shao2-debian>
Date: Tue, 27 Nov 2018 13:59:50 +0800
From: kernel test robot <rong.a.chen@...el.com>
To: Paolo Abeni <pabeni@...hat.com>
Cc: "David S. Miller" <davem@...emloft.net>,
LKML <linux-kernel@...r.kernel.org>,
Stephen Rothwell <sfr@...b.auug.org.au>, lkp@...org
Subject: [LKP] [selftests] 3327a9c463: kernel_selftests.net.udpgro.sh.fail
FYI, we noticed the following commit (built with gcc-7):
commit: 3327a9c46352f111697d93d6134e7bf37c6bffca ("selftests: add functionals test for UDP GRO")
https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git master
in testcase: kernel_selftests
with following parameters:
group: kselftests-02
test-description: The kernel contains a set of "self tests" under the tools/testing/selftests/ directory. These are intended to be small unit tests to exercise individual code paths in the kernel.
test-url: https://www.kernel.org/doc/Documentation/kselftest.txt
on test machine: qemu-system-x86_64 -enable-kvm -cpu host -smp 2 -m 4G
caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
KERNEL SELFTESTS: linux_headers_dir is /usr/src/linux-headers-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca
2018-11-25 06:12:42 ln -sf /usr/bin/clang-7 /usr/bin/clang
2018-11-25 06:12:44 ln -sf /usr/bin/llc-7 /usr/bin/llc
media_tests test: not in Makefile
2018-11-25 06:12:45 make TARGETS=media_tests
make[1]: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/media_tests'
gcc -I../ -I../../../../usr/include/ media_device_test.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/media_tests/media_device_test
gcc -I../ -I../../../../usr/include/ media_device_open.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/media_tests/media_device_open
gcc -I../ -I../../../../usr/include/ video_device_test.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/media_tests/video_device_test
make[1]: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/media_tests'
ignored_by_lkp media_tests test
2018-11-25 06:12:57 make run_tests -C membarrier
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/membarrier'
gcc -g -I../../../../usr/include/ membarrier_test.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/membarrier/membarrier_test
TAP version 13
selftests: membarrier: membarrier_test
========================================
ok 1 sys_membarrier available
ok 2 sys membarrier invalid command test: command = -1, flags = 0, errno = 22. Failed as expected
ok 3 sys membarrier MEMBARRIER_CMD_QUERY invalid flags test: flags = 1, errno = 22. Failed as expected
ok 4 sys membarrier MEMBARRIER_CMD_GLOBAL test: flags = 0
ok 5 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED not registered failure test: flags = 0, errno = 1
ok 6 sys membarrier MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED test: flags = 0
ok 7 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED test: flags = 0
ok 8 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE not registered failure test: flags = 0, errno = 1
ok 9 sys membarrier MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_SYNC_CORE test: flags = 0
ok 10 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE test: flags = 0
ok 11 sys membarrier MEMBARRIER_CMD_GLOBAL_EXPEDITED test: flags = 0
ok 12 sys membarrier MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED test: flags = 0
ok 13 sys membarrier MEMBARRIER_CMD_GLOBAL_EXPEDITED test: flags = 0
Pass 13 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
1..13
ok 1..1 selftests: membarrier: membarrier_test [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/membarrier'
2018-11-25 06:13:04 make run_tests -C memfd
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/memfd'
gcc -D_FILE_OFFSET_BITS=64 -I../../../../include/uapi/ -I../../../../include/ -I../../../../usr/include/ -c -o common.o common.c
gcc -D_FILE_OFFSET_BITS=64 -I../../../../include/uapi/ -I../../../../include/ -I../../../../usr/include/ memfd_test.c common.o -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/memfd/memfd_test
In file included from ../../../../include/uapi/linux/stddef.h:2:0,
from ../../../../include/uapi/linux/posix_types.h:5,
from ../../../../include/uapi/linux/types.h:14,
from ../../../../include/uapi/asm-generic/fcntl.h:5,
from ../../../../usr/include/asm/fcntl.h:1,
from ../../../../include/uapi/linux/fcntl.h:5,
from memfd_test.c:9:
../../../../include/linux/compiler_types.h:198:58: error: unknown type name ‘__gnu_inline’
#define inline inline __attribute__((__always_inline__)) __gnu_inline \
^
../../../../include/linux/compiler_types.h:199:2: warning: variable ‘__maybe_unused’ declared ‘inline’
__maybe_unused notrace
^
../../../../include/linux/compiler_types.h:199:2: error: ‘__no_instrument_function__’ attribute applies only to functions
In file included from /usr/include/endian.h:60:0,
from /usr/include/x86_64-linux-gnu/sys/types.h:194,
from /usr/include/stdlib.h:394,
from memfd_test.c:13:
/usr/include/x86_64-linux-gnu/bits/byteswap.h:44:17: error: expected ‘,’ or ‘;’ before ‘unsigned’
static __inline unsigned int
^~~~~~~~
In file included from ../../../../include/uapi/linux/stddef.h:2:0,
from ../../../../include/uapi/linux/posix_types.h:5,
from ../../../../include/uapi/linux/types.h:14,
from ../../../../include/uapi/asm-generic/fcntl.h:5,
from ../../../../usr/include/asm/fcntl.h:1,
from ../../../../include/uapi/linux/fcntl.h:5,
from memfd_test.c:9:
../../../../include/linux/compiler_types.h:198:58: error: unknown type name ‘__gnu_inline’
#define inline inline __attribute__((__always_inline__)) __gnu_inline \
^
../../../../include/linux/compiler_types.h:199:2: warning: variable ‘__maybe_unused’ declared ‘inline’
__maybe_unused notrace
^
../../../../include/linux/compiler_types.h:199:2: error: ‘__no_instrument_function__’ attribute applies only to functions
In file included from /usr/include/endian.h:60:0,
from /usr/include/x86_64-linux-gnu/sys/types.h:194,
from /usr/include/stdlib.h:394,
from memfd_test.c:13:
/usr/include/x86_64-linux-gnu/bits/byteswap.h:108:17: error: expected ‘,’ or ‘;’ before ‘__uint64_t’
static __inline __uint64_t
^~~~~~~~~~
In file included from ../../../../include/uapi/linux/stddef.h:2:0,
from ../../../../include/uapi/linux/posix_types.h:5,
from ../../../../include/uapi/linux/types.h:14,
from ../../../../include/uapi/asm-generic/fcntl.h:5,
from ../../../../usr/include/asm/fcntl.h:1,
from ../../../../include/uapi/linux/fcntl.h:5,
from memfd_test.c:9:
../../../../include/linux/compiler_types.h:198:58: error: unknown type name ‘__gnu_inline’
#define inline inline __attribute__((__always_inline__)) __gnu_inline \
^
../../../../include/linux/compiler_types.h:199:2: warning: variable ‘__maybe_unused’ declared ‘inline’
__maybe_unused notrace
^
../../../../include/linux/compiler_types.h:199:2: error: ‘__no_instrument_function__’ attribute applies only to functions
In file included from /usr/include/endian.h:61:0,
from /usr/include/x86_64-linux-gnu/sys/types.h:194,
from /usr/include/stdlib.h:394,
from memfd_test.c:13:
/usr/include/x86_64-linux-gnu/bits/uintn-identity.h:32:17: error: expected ‘,’ or ‘;’ before ‘__uint16_t’
static __inline __uint16_t
^~~~~~~~~~
In file included from ../../../../include/uapi/linux/stddef.h:2:0,
from ../../../../include/uapi/linux/posix_types.h:5,
from ../../../../include/uapi/linux/types.h:14,
from ../../../../include/uapi/asm-generic/fcntl.h:5,
from ../../../../usr/include/asm/fcntl.h:1,
from ../../../../include/uapi/linux/fcntl.h:5,
from memfd_test.c:9:
../../../../include/linux/compiler_types.h:198:58: error: unknown type name ‘__gnu_inline’
#define inline inline __attribute__((__always_inline__)) __gnu_inline \
^
../../../../include/linux/compiler_types.h:199:2: warning: variable ‘__maybe_unused’ declared ‘inline’
__maybe_unused notrace
^
../../../../include/linux/compiler_types.h:199:2: error: ‘__no_instrument_function__’ attribute applies only to functions
In file included from /usr/include/endian.h:61:0,
from /usr/include/x86_64-linux-gnu/sys/types.h:194,
from /usr/include/stdlib.h:394,
from memfd_test.c:13:
/usr/include/x86_64-linux-gnu/bits/uintn-identity.h:38:17: error: expected ‘,’ or ‘;’ before ‘__uint32_t’
static __inline __uint32_t
^~~~~~~~~~
In file included from ../../../../include/uapi/linux/stddef.h:2:0,
from ../../../../include/uapi/linux/posix_types.h:5,
from ../../../../include/uapi/linux/types.h:14,
from ../../../../include/uapi/asm-generic/fcntl.h:5,
from ../../../../usr/include/asm/fcntl.h:1,
from ../../../../include/uapi/linux/fcntl.h:5,
from memfd_test.c:9:
../../../../include/linux/compiler_types.h:198:58: error: unknown type name ‘__gnu_inline’
#define inline inline __attribute__((__always_inline__)) __gnu_inline \
^
../../../../include/linux/compiler_types.h:199:2: warning: variable ‘__maybe_unused’ declared ‘inline’
__maybe_unused notrace
^
../../../../include/linux/compiler_types.h:199:2: error: ‘__no_instrument_function__’ attribute applies only to functions
In file included from /usr/include/endian.h:61:0,
from /usr/include/x86_64-linux-gnu/sys/types.h:194,
from /usr/include/stdlib.h:394,
from memfd_test.c:13:
/usr/include/x86_64-linux-gnu/bits/uintn-identity.h:44:17: error: expected ‘,’ or ‘;’ before ‘__uint64_t’
static __inline __uint64_t
^~~~~~~~~~
memfd_test.c: In function ‘mfd_assert_get_seals’:
memfd_test.c:74:6: warning: implicit declaration of function ‘fcntl’ [-Wimplicit-function-declaration]
r = fcntl(fd, F_GET_SEALS);
^~~~~
memfd_test.c: In function ‘mfd_assert_open’:
memfd_test.c:197:6: warning: implicit declaration of function ‘open’ [-Wimplicit-function-declaration]
r = open(buf, flags, mode);
^~~~
memfd_test.c: In function ‘mfd_assert_write’:
memfd_test.c:328:6: warning: implicit declaration of function ‘fallocate’ [-Wimplicit-function-declaration]
r = fallocate(fd,
^~~~~~~~~
../lib.mk:152: recipe for target '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/memfd/memfd_test' failed
make: *** [/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/memfd/memfd_test] Error 1
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/memfd'
2018-11-25 06:13:09 make run_tests -C memory-hotplug
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/memory-hotplug'
TAP version 13
selftests: memory-hotplug: mem-on-off-test.sh
========================================
Test scope: 2% hotplug memory
online all hot-pluggable memory in offline state:
SKIPPED - no hot-pluggable memory in offline state
offline 2% hot-pluggable memory in online state
trying to offline 1 out of 44 memory block(s):
online->offline memory1
online all hot-pluggable memory in offline state:
offline->online memory1
Test with memory notifier error injection
ok 1..1 selftests: memory-hotplug: mem-on-off-test.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/memory-hotplug'
2018-11-25 06:14:29 make run_tests -C mount
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/mount'
gcc -Wall -O2 unprivileged-remount-test.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/mount/unprivileged-remount-test
TAP version 13
selftests: mount: run_tests.sh
========================================
ok 1..1 selftests: mount: run_tests.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/mount'
2018-11-25 06:14:38 make run_tests -C mqueue
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/mqueue'
gcc -O2 mq_open_tests.c -lrt -lpthread -lpopt -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/mqueue/mq_open_tests
gcc -O2 mq_perf_tests.c -lrt -lpthread -lpopt -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/mqueue/mq_perf_tests
TAP version 13
selftests: mqueue: mq_open_tests
========================================
Using Default queue path - /test1
Initial system state:
Using queue path: /test1
RLIMIT_MSGQUEUE(soft): 819200
RLIMIT_MSGQUEUE(hard): 819200
Maximum Message Size: 8192
Maximum Queue Size: 10
Default Message Size: 8192
Default Queue Size: 10
Adjusted system state for testing:
RLIMIT_MSGQUEUE(soft): 819200
RLIMIT_MSGQUEUE(hard): 819200
Maximum Message Size: 8192
Maximum Queue Size: 10
Default Message Size: 8192
Default Queue Size: 10
Test series 1, behavior when no attr struct passed to mq_open:
Kernel supports setting defaults separately from maximums: PASS
Given sane values, mq_open without an attr struct succeeds: PASS
Kernel properly honors default setting knobs: PASS
Kernel properly limits default values to lesser of default/max: PASS
Kernel properly fails to create queue when defaults would
exceed rlimit: PASS
Test series 2, behavior when attr struct is passed to mq_open:
Queue open in excess of rlimit max when euid = 0 failed: PASS
Queue open with mq_maxmsg > limit when euid = 0 succeeded: PASS
Queue open with mq_msgsize > limit when euid = 0 succeeded: PASS
Queue open with total size > 2GB when euid = 0 failed: PASS
Queue open in excess of rlimit max when euid = 99 failed: PASS
Queue open with mq_maxmsg > limit when euid = 99 failed: PASS
Queue open with mq_msgsize > limit when euid = 99 failed: PASS
Queue open with total size > 2GB when euid = 99 failed: PASS
ok 1..1 selftests: mqueue: mq_open_tests [PASS]
selftests: mqueue: mq_perf_tests
========================================
Initial system state:
Using queue path: /mq_perf_tests
RLIMIT_MSGQUEUE(soft): 819200
RLIMIT_MSGQUEUE(hard): 819200
Maximum Message Size: 8192
Maximum Queue Size: 10
Nice value: 0
Adjusted system state for testing:
RLIMIT_MSGQUEUE(soft): (unlimited)
RLIMIT_MSGQUEUE(hard): (unlimited)
Maximum Message Size: 16777216
Maximum Queue Size: 65530
Nice value: -20
Continuous mode: (disabled)
CPUs to pin: 1
Queue /mq_perf_tests created:
mq_flags: O_NONBLOCK
mq_maxmsg: 65530
mq_msgsize: 16
mq_curmsgs: 0
Started mqueue performance test thread on CPU 1
Max priorities: 32768
Clock resolution: 1 nsec
Test #1: Time send/recv message, queue empty
(10000000 iterations)
Send msg: 38.520959153s total time
3852 nsec/msg
Recv msg: 41.174815167s total time
4117 nsec/msg
Test #2a: Time send/recv message, queue full, constant prio
:
(100000 iterations)
Filling queue...done. 0.239320572s
Testing...done.
Send msg: 0.316328024s total time
3163 nsec/msg
Recv msg: 0.531281374s total time
5312 nsec/msg
Draining queue...done. 0.236636277s
Test #2b: Time send/recv message, queue full, increasing prio
:
(100000 iterations)
Filling queue...done. 0.437246796s
Testing...done.
Send msg: 0.761910337s total time
7619 nsec/msg
Recv msg: 0.613126418s total time
6131 nsec/msg
Draining queue...done. 0.482568673s
Test #2c: Time send/recv message, queue full, decreasing prio
:
(100000 iterations)
Filling queue...done. 0.518045458s
Testing...done.
Send msg: 1.49048938s total time
10490 nsec/msg
Recv msg: 0.805750776s total time
8057 nsec/msg
Draining queue...done. 0.501415555s
Test #2d: Time send/recv message, queue full, random prio
:
(100000 iterations)
Filling queue...done. 1.112216444s
Testing...done.
Send msg: 1.839992766s total time
18399 nsec/msg
Recv msg: 1.286227826s total time
12862 nsec/msg
Draining queue...done. 0.821060938s
ok 1..2 selftests: mqueue: mq_perf_tests [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/mqueue'
2018-11-25 06:16:48 make run_tests -C net
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net'
make ARCH=x86 -C ../../../.. headers_install
make[1]: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca'
UPD include/generated/uapi/linux/version.h
HOSTCC scripts/basic/fixdep
WRAP arch/x86/include/generated/uapi/asm/bpf_perf_event.h
WRAP arch/x86/include/generated/uapi/asm/poll.h
SYSTBL arch/x86/include/generated/asm/syscalls_32.h
SYSHDR arch/x86/include/generated/uapi/asm/unistd_32.h
SYSHDR arch/x86/include/generated/uapi/asm/unistd_64.h
SYSHDR arch/x86/include/generated/uapi/asm/unistd_x32.h
HOSTCC arch/x86/tools/relocs_32.o
HOSTCC arch/x86/tools/relocs_64.o
HOSTCC arch/x86/tools/relocs_common.o
HOSTLD arch/x86/tools/relocs
HOSTCC scripts/unifdef
INSTALL usr/include/asm-generic/ (37 files)
INSTALL usr/include/drm/ (26 files)
INSTALL usr/include/linux/ (501 files)
INSTALL usr/include/linux/android/ (1 file)
INSTALL usr/include/linux/byteorder/ (2 files)
INSTALL usr/include/linux/caif/ (2 files)
INSTALL usr/include/linux/can/ (6 files)
INSTALL usr/include/linux/cifs/ (1 file)
INSTALL usr/include/linux/dvb/ (8 files)
INSTALL usr/include/linux/genwqe/ (1 file)
INSTALL usr/include/linux/hdlc/ (1 file)
INSTALL usr/include/linux/hsi/ (2 files)
INSTALL usr/include/linux/iio/ (2 files)
INSTALL usr/include/linux/isdn/ (1 file)
INSTALL usr/include/linux/mmc/ (1 file)
INSTALL usr/include/linux/netfilter/ (88 files)
INSTALL usr/include/linux/netfilter/ipset/ (4 files)
INSTALL usr/include/linux/netfilter_arp/ (2 files)
INSTALL usr/include/linux/netfilter_bridge/ (17 files)
INSTALL usr/include/linux/netfilter_ipv4/ (9 files)
INSTALL usr/include/linux/netfilter_ipv6/ (13 files)
INSTALL usr/include/linux/nfsd/ (5 files)
INSTALL usr/include/linux/raid/ (2 files)
INSTALL usr/include/linux/sched/ (1 file)
INSTALL usr/include/linux/spi/ (1 file)
INSTALL usr/include/linux/sunrpc/ (1 file)
INSTALL usr/include/linux/tc_act/ (15 files)
INSTALL usr/include/linux/tc_ematch/ (5 files)
INSTALL usr/include/linux/usb/ (13 files)
INSTALL usr/include/linux/wimax/ (1 file)
INSTALL usr/include/misc/ (2 files)
INSTALL usr/include/mtd/ (5 files)
INSTALL usr/include/rdma/ (25 files)
INSTALL usr/include/rdma/hfi/ (2 files)
INSTALL usr/include/scsi/ (5 files)
INSTALL usr/include/scsi/fc/ (4 files)
INSTALL usr/include/sound/ (16 files)
INSTALL usr/include/video/ (3 files)
INSTALL usr/include/xen/ (4 files)
INSTALL usr/include/asm/ (62 files)
make[1]: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca'
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ reuseport_bpf.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net/reuseport_bpf
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ reuseport_bpf_cpu.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net/reuseport_bpf_cpu
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -lnuma reuseport_bpf_numa.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net/reuseport_bpf_numa
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ reuseport_dualstack.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net/reuseport_dualstack
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ reuseaddr_conflict.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net/reuseaddr_conflict
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ tls.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net/tls
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ socket.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net/socket
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ psock_fanout.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net/psock_fanout
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ psock_tpacket.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net/psock_tpacket
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ msg_zerocopy.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net/msg_zerocopy
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -lpthread tcp_mmap.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net/tcp_mmap
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -lpthread tcp_inq.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net/tcp_inq
tcp_inq.c: In function ‘main’:
tcp_inq.c:178:4: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
inq = *((int *) CMSG_DATA(cm));
^~~
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ psock_snd.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net/psock_snd
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ udpgso.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net/udpgso
udpgso.c: In function ‘send_one’:
udpgso.c:484:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
*((uint16_t *) CMSG_DATA(cm)) = gso_len;
^
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ udpgso_bench_tx.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net/udpgso_bench_tx
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ udpgso_bench_rx.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net/udpgso_bench_rx
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ ip_defrag.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net/ip_defrag
TAP version 13
selftests: net: reuseport_bpf
========================================
---- IPv4 UDP ----
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing EBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
Testing too many filters...
Testing filters on non-SO_REUSEPORT socket...
---- IPv6 UDP ----
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing EBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
Testing too many filters...
Testing filters on non-SO_REUSEPORT socket...
---- IPv6 UDP w/ mapped IPv4 ----
Testing EBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
---- IPv4 TCP ----
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing too many filters...
Testing filters on non-SO_REUSEPORT socket...
---- IPv6 TCP ----
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing too many filters...
Testing filters on non-SO_REUSEPORT socket...
---- IPv6 TCP w/ mapped IPv4 ----
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing filter add without bind...
SUCCESS
ok 1..1 selftests: net: reuseport_bpf [PASS]
selftests: net: reuseport_bpf_cpu
========================================
---- IPv4 UDP ----
send cpu 0, receive socket 0
send cpu 1, receive socket 1
send cpu 1, receive socket 1
send cpu 0, receive socket 0
send cpu 0, receive socket 0
send cpu 1, receive socket 1
---- IPv6 UDP ----
send cpu 0, receive socket 0
send cpu 1, receive socket 1
send cpu 1, receive socket 1
send cpu 0, receive socket 0
send cpu 0, receive socket 0
send cpu 1, receive socket 1
---- IPv4 TCP ----
send cpu 0, receive socket 0
send cpu 1, receive socket 1
send cpu 1, receive socket 1
send cpu 0, receive socket 0
send cpu 0, receive socket 0
send cpu 1, receive socket 1
---- IPv6 TCP ----
send cpu 0, receive socket 0
send cpu 1, receive socket 1
send cpu 1, receive socket 1
send cpu 0, receive socket 0
send cpu 0, receive socket 0
send cpu 1, receive socket 1
SUCCESS
ok 1..2 selftests: net: reuseport_bpf_cpu [PASS]
selftests: net: reuseport_bpf_numa
========================================
---- IPv4 UDP ----
send node 0, receive socket 0
send node 0, receive socket 0
---- IPv6 UDP ----
send node 0, receive socket 0
send node 0, receive socket 0
---- IPv4 TCP ----
send node 0, receive socket 0
send node 0, receive socket 0
---- IPv6 TCP ----
send node 0, receive socket 0
send node 0, receive socket 0
SUCCESS
ok 1..3 selftests: net: reuseport_bpf_numa [PASS]
selftests: net: reuseport_dualstack
========================================
---- UDP IPv4 created before IPv6 ----
---- UDP IPv6 created before IPv4 ----
---- UDP IPv4 created before IPv6 (large) ----
---- UDP IPv6 created before IPv4 (large) ----
---- TCP IPv4 created before IPv6 ----
---- TCP IPv6 created before IPv4 ----
SUCCESS
ok 1..4 selftests: net: reuseport_dualstack [PASS]
selftests: net: reuseaddr_conflict
========================================
Opening 127.0.0.1:9999
Opening INADDR_ANY:9999
bind: Address already in use
Opening in6addr_any:9999
Opening INADDR_ANY:9999
bind: Address already in use
Opening INADDR_ANY:9999 after closing ipv6 socket
bind: Address already in use
Successok 1..5 selftests: net: reuseaddr_conflict [PASS]
selftests: net: tls
========================================
[==========] Running 29 tests from 2 test cases.
[ RUN ] tls.sendfile
[ OK ] tls.sendfile
[ RUN ] tls.send_then_sendfile
[ OK ] tls.send_then_sendfile
[ RUN ] tls.recv_max
[ OK ] tls.recv_max
[ RUN ] tls.recv_small
[ OK ] tls.recv_small
[ RUN ] tls.msg_more
[ OK ] tls.msg_more
[ RUN ] tls.sendmsg_single
[ OK ] tls.sendmsg_single
[ RUN ] tls.sendmsg_large
[ OK ] tls.sendmsg_large
[ RUN ] tls.sendmsg_multiple
[ OK ] tls.sendmsg_multiple
[ RUN ] tls.sendmsg_multiple_stress
[ OK ] tls.sendmsg_multiple_stress
[ RUN ] tls.splice_from_pipe
[ OK ] tls.splice_from_pipe
[ RUN ] tls.splice_from_pipe2
[ OK ] tls.splice_from_pipe2
[ RUN ] tls.send_and_splice
[ OK ] tls.send_and_splice
[ RUN ] tls.splice_to_pipe
[ OK ] tls.splice_to_pipe
[ RUN ] tls.recvmsg_single
[ OK ] tls.recvmsg_single
[ RUN ] tls.recvmsg_single_max
[ OK ] tls.recvmsg_single_max
[ RUN ] tls.recvmsg_multiple
[ OK ] tls.recvmsg_multiple
[ RUN ] tls.single_send_multiple_recv
[ OK ] tls.single_send_multiple_recv
[ RUN ] tls.multiple_send_single_recv
[ OK ] tls.multiple_send_single_recv
[ RUN ] tls.recv_partial
[ OK ] tls.recv_partial
[ RUN ] tls.recv_nonblock
[ OK ] tls.recv_nonblock
[ RUN ] tls.recv_peek
[ OK ] tls.recv_peek
[ RUN ] tls.recv_peek_multiple
[ OK ] tls.recv_peek_multiple
[ RUN ] tls.recv_peek_multiple_records
[ OK ] tls.recv_peek_multiple_records
[ RUN ] tls.recv_peek_large_buf_mult_recs
[ OK ] tls.recv_peek_large_buf_mult_recs
[ RUN ] tls.pollin
[ OK ] tls.pollin
[ RUN ] tls.poll_wait
[ OK ] tls.poll_wait
[ RUN ] tls.blocking
[ OK ] tls.blocking
[ RUN ] tls.nonblocking
[ OK ] tls.nonblocking
[ RUN ] tls.control_msg
[ OK ] tls.control_msg
[==========] 29 / 29 tests passed.
[ PASSED ]
ok 1..6 selftests: net: tls [PASS]
selftests: net: run_netsocktests
========================================
--------------------
running socket test
--------------------
[PASS]
ok 1..7 selftests: net: run_netsocktests [PASS]
selftests: net: run_afpackettests
========================================
--------------------
running psock_fanout test
--------------------
test: control single socket
test: control multiple sockets
test: unique ids
test: datapath 0x0 ports 8000,8002
info: count=0,0, expect=0,0
info: count=15,5, expect=15,5
info: count=20,5, expect=20,5
test: datapath 0x1000 ports 8000,8002
info: count=0,0, expect=0,0
info: count=15,5, expect=15,5
info: count=20,15, expect=20,15
test: datapath 0x1 ports 8000,8002
info: count=0,0, expect=0,0
info: count=10,10, expect=10,10
info: count=17,18, expect=18,17
test: datapath 0x3 ports 8000,8002
info: count=0,0, expect=0,0
info: count=15,5, expect=15,5
info: count=20,15, expect=20,15
test: datapath 0x6 ports 8000,8002
info: count=0,0, expect=0,0
info: count=5,15, expect=15,5
info: count=20,15, expect=15,20
test: datapath 0x7 ports 8000,8002
info: count=0,0, expect=0,0
info: count=5,15, expect=15,5
info: count=20,15, expect=15,20
test: datapath 0x2 ports 8000,8002
info: count=0,0, expect=0,0
info: count=20,0, expect=20,0
info: count=20,0, expect=20,0
test: datapath 0x2 ports 8000,8002
info: count=0,0, expect=0,0
info: count=0,20, expect=0,20
info: count=0,20, expect=0,20
test: datapath 0x2000 ports 8000,8002
info: count=0,0, expect=0,0
info: count=20,20, expect=20,20
info: count=20,20, expect=20,20
OK. All tests passed
[PASS]
--------------------
running psock_tpacket test
--------------------
test: TPACKET_V1 with PACKET_RX_RING .................... 100 pkts (14200 bytes)
test: TPACKET_V1 with PACKET_TX_RING .................... 100 pkts (14200 bytes)
test: TPACKET_V2 with PACKET_RX_RING .................... 100 pkts (14200 bytes)
test: TPACKET_V2 with PACKET_TX_RING .................... 100 pkts (14200 bytes)
test: TPACKET_V3 with PACKET_RX_RING .................... 100 pkts (14200 bytes)
test: TPACKET_V3 with PACKET_TX_RING .................... 100 pkts (14200 bytes)
OK. All tests passed
[PASS]
ok 1..8 selftests: net: run_afpackettests [PASS]
selftests: net: test_bpf.sh
========================================
test_bpf: ok
ok 1..9 selftests: net: test_bpf.sh [PASS]
selftests: net: netdevice.sh
========================================
SKIP: eth0: interface already up
Cannot get device udp-fragmentation-offload settings: Operation not supported
PASS: eth0: ethtool list features
PASS: eth0: ethtool dump
PASS: eth0: ethtool stats
SKIP: eth0: interface kept up
ok 1..10 selftests: net: netdevice.sh [PASS]
selftests: net: rtnetlink.sh
========================================
PASS: policy routing
PASS: route get
PASS: tc htb hierarchy
PASS: gre tunnel endpoint
PASS: gretap
RTNETLINK answers: Operation not supported
Cannot find device "ip6gretap00"
Cannot find device "ip6gretap00"
Cannot find device "ip6gretap00"
RTNETLINK answers: Operation not supported
Cannot find device "ip6gretap00"
FAIL: ip6gretap
PASS: erspan
RTNETLINK answers: Operation not supported
Cannot find device "ip6erspan00"
Cannot find device "ip6erspan00"
Cannot find device "ip6erspan00"
RTNETLINK answers: Operation not supported
Cannot find device "ip6erspan00"
Cannot find device "ip6erspan00"
Cannot find device "ip6erspan00"
RTNETLINK answers: Operation not supported
Cannot find device "ip6erspan00"
FAIL: ip6erspan
PASS: bridge setup
PASS: ipv6 addrlabel
PASS: set ifalias 7d760442-d462-4634-a54a-33f4d17d77ed for test-dummy0
PASS: vrf
PASS: vxlan
PASS: fou
PASS: macsec
PASS: ipsec
FAIL: ipsec_offload netdevsim doesn't support IPsec offload
ok 1..11 selftests: net: rtnetlink.sh [PASS]
selftests: net: fib_tests.sh
========================================
Single path route test
Start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
Nexthop device deleted
TEST: IPv4 fibmatch - no route [ OK ]
TEST: IPv6 fibmatch - no route [ OK ]
Multipath route test
Start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
One nexthop device deleted
TEST: IPv4 - multipath route removed on delete [ OK ]
TEST: IPv6 - multipath down to single path [ OK ]
Second nexthop device deleted
TEST: IPv6 - no route [ OK ]
Single path, admin down
Start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
Route deleted on down
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
Admin down multipath
Verify start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
One device down, one up
TEST: IPv4 fibmatch on down device [ OK ]
TEST: IPv6 fibmatch on down device [ OK ]
TEST: IPv4 fibmatch on up device [ OK ]
TEST: IPv6 fibmatch on up device [ OK ]
TEST: IPv4 flags on down device [ OK ]
TEST: IPv6 flags on down device [ OK ]
TEST: IPv4 flags on up device [ OK ]
TEST: IPv6 flags on up device [ OK ]
Other device down and up
TEST: IPv4 fibmatch on down device [ OK ]
TEST: IPv6 fibmatch on down device [ OK ]
TEST: IPv4 fibmatch on up device [ OK ]
TEST: IPv6 fibmatch on up device [ OK ]
TEST: IPv4 flags on down device [ OK ]
TEST: IPv6 flags on down device [ OK ]
TEST: IPv4 flags on up device [ OK ]
TEST: IPv6 flags on up device [ OK ]
Both devices down
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
Local carrier tests - single path
Start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 - no linkdown flag [ OK ]
TEST: IPv6 - no linkdown flag [ OK ]
Carrier off on nexthop
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 - linkdown flag set [ OK ]
TEST: IPv6 - linkdown flag set [ OK ]
Route to local address with carrier down
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 linkdown flag set [ OK ]
TEST: IPv6 linkdown flag set [ OK ]
Single path route carrier test
Start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 no linkdown flag [ OK ]
TEST: IPv6 no linkdown flag [ OK ]
Carrier down
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 linkdown flag set [ OK ]
TEST: IPv6 linkdown flag set [ OK ]
Second address added with carrier down
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 linkdown flag set [ OK ]
TEST: IPv6 linkdown flag set [ OK ]
IPv4 nexthop tests
<<< write me >>>
IPv6 nexthop tests
TEST: Directly connected nexthop, unicast address [ OK ]
TEST: Directly connected nexthop, unicast address with device [ OK ]
TEST: Gateway is linklocal address [ OK ]
TEST: Gateway is linklocal address, no device [ OK ]
TEST: Gateway can not be local unicast address [ OK ]
TEST: Gateway can not be local unicast address, with device [ OK ]
TEST: Gateway can not be a local linklocal address [ OK ]
TEST: Gateway can be local address in a VRF [ OK ]
TEST: Gateway can be local address in a VRF, with device [ OK ]
TEST: Gateway can be local linklocal address in a VRF [ OK ]
TEST: Redirect to VRF lookup [ OK ]
TEST: VRF route, gateway can be local address in default VRF [ OK ]
TEST: VRF route, gateway can not be a local address [ OK ]
TEST: VRF route, gateway can not be a local addr with device [ OK ]
IPv6 route add / append tests
TEST: Attempt to add duplicate route - gw [ OK ]
TEST: Attempt to add duplicate route - dev only [ OK ]
TEST: Attempt to add duplicate route - reject route [ OK ]
TEST: Append nexthop to existing route - gw [ OK ]
TEST: Add multipath route [ OK ]
TEST: Attempt to add duplicate multipath route [ OK ]
TEST: Route add with different metrics [ OK ]
TEST: Route delete with metric [ OK ]
IPv6 route replace tests
TEST: Single path with single path [ OK ]
TEST: Single path with multipath [ OK ]
TEST: Single path with single path via multipath attribute [ OK ]
TEST: Invalid nexthop [ OK ]
TEST: Single path - replace of non-existent route [ OK ]
TEST: Multipath with multipath [ OK ]
TEST: Multipath with single path [ OK ]
TEST: Multipath with single path via multipath attribute [ OK ]
TEST: Multipath - invalid first nexthop [ OK ]
TEST: Multipath - invalid second nexthop [ OK ]
TEST: Multipath - replace of non-existent route [ OK ]
IPv4 route add / append tests
TEST: Attempt to add duplicate route - gw [ OK ]
TEST: Attempt to add duplicate route - dev only [ OK ]
TEST: Attempt to add duplicate route - reject route [ OK ]
TEST: Add new nexthop for existing prefix [ OK ]
TEST: Append nexthop to existing route - gw [ OK ]
TEST: Append nexthop to existing route - dev only [ OK ]
TEST: Append nexthop to existing route - reject route [ OK ]
TEST: Append nexthop to existing reject route - gw [ OK ]
TEST: Append nexthop to existing reject route - dev only [ OK ]
TEST: add multipath route [ OK ]
TEST: Attempt to add duplicate multipath route [ OK ]
TEST: Route add with different metrics [ OK ]
TEST: Route delete with metric [ OK ]
IPv4 route replace tests
TEST: Single path with single path [ OK ]
TEST: Single path with multipath [ OK ]
TEST: Single path with reject route [ OK ]
TEST: Single path with single path via multipath attribute [ OK ]
TEST: Invalid nexthop [ OK ]
TEST: Single path - replace of non-existent route [ OK ]
TEST: Multipath with multipath [ OK ]
TEST: Multipath with single path [ OK ]
TEST: Multipath with single path via multipath attribute [ OK ]
TEST: Multipath with reject route [ OK ]
TEST: Multipath - invalid first nexthop [ OK ]
TEST: Multipath - invalid second nexthop [ OK ]
TEST: Multipath - replace of non-existent route [ OK ]
IPv6 prefix route tests
TEST: Default metric [ OK ]
TEST: User specified metric on first device [ OK ]
TEST: User specified metric on second device [ OK ]
TEST: Delete of address on first device [ OK ]
TEST: Modify metric of address [ OK ]
Command line is not complete. Try option "help"
TEST: Prefix route removed on link down [ OK ]
TEST: Prefix route with metric on link up [ OK ]
IPv4 prefix route tests
TEST: Default metric [ OK ]
TEST: User specified metric on first device [ OK ]
TEST: User specified metric on second device [ OK ]
TEST: Delete of address on first device [ OK ]
TEST: Modify metric of address [ OK ]
Command line is not complete. Try option "help"
TEST: Prefix route removed on link down [ OK ]
TEST: Prefix route with metric on link up [ OK ]
IPv6 routes with metrics
TEST: Single path route with mtu metric [ OK ]
TEST: Multipath route via 2 single routes with mtu metric on first [ OK ]
TEST: Multipath route via 2 single routes with mtu metric on 2nd [ OK ]
TEST: MTU of second leg [ OK ]
TEST: Multipath route with mtu metric [ OK ]
TEST: Using route with mtu metric [ OK ]
TEST: Invalid metric (fails metric_convert) [ OK ]
IPv4 route add / append tests
TEST: Single path route with mtu metric [ OK ]
TEST: Multipath route with mtu metric [ OK ]
TEST: Using route with mtu metric [ OK ]
TEST: Invalid metric (fails metric_convert) [ OK ]
Tests passed: 141
Tests failed: 0
ok 1..12 selftests: net: fib_tests.sh [PASS]
selftests: net: fib-onlink-tests.sh
========================================
########################################
Configuring interfaces
RTNETLINK answers: File exists
not ok 1..13 selftests: net: fib-onlink-tests.sh [FAIL]
selftests: net: pmtu.sh
========================================
TEST: ipv4: PMTU exceptions [ OK ]
connect: Cannot assign requested address
connect: Cannot assign requested address
TEST: ipv6: PMTU exceptions [FAIL]
PMTU exception wasn't created after exceeding MTU
TEST: vti6: PMTU exceptions [ OK ]
TEST: vti4: PMTU exceptions [ OK ]
TEST: vti4: default MTU assignment [ OK ]
TEST: vti6: default MTU assignment [ OK ]
TEST: vti4: MTU setting on link creation [ OK ]
TEST: vti6: MTU setting on link creation [ OK ]
TEST: vti6: MTU changes on link changes [ OK ]
not ok 1..14 selftests: net: pmtu.sh [FAIL]
selftests: net: udpgso.sh
========================================
ipv4 cmsg
device mtu (orig): 65536
device mtu (test): 1500
ipv4 tx:1 gso:0
ipv4 tx:1472 gso:0
ipv4 tx:1473 gso:0 (fail)
ipv4 tx:1472 gso:1472 (fail)
ipv4 tx:1473 gso:1472
ipv4 tx:2944 gso:1472
ipv4 tx:2945 gso:1472
ipv4 tx:64768 gso:1472
ipv4 tx:65507 gso:1472
ipv4 tx:65508 gso:1472 (fail)
ipv4 tx:1 gso:1 (fail)
ipv4 tx:2 gso:1
ipv4 tx:5 gso:2
ipv4 tx:36 gso:1
ipv4 tx:37 gso:1 (fail)
OK
ipv4 setsockopt
device mtu (orig): 65536
device mtu (test): 1500
ipv4 tx:1 gso:0
ipv4 tx:1472 gso:0
ipv4 tx:1473 gso:0 (fail)
ipv4 tx:1472 gso:1472 (fail)
ipv4 tx:1473 gso:1472
ipv4 tx:2944 gso:1472
ipv4 tx:2945 gso:1472
ipv4 tx:64768 gso:1472
ipv4 tx:65507 gso:1472
ipv4 tx:65508 gso:1472 (fail)
ipv4 tx:1 gso:1 (fail)
ipv4 tx:2 gso:1
ipv4 tx:5 gso:2
ipv4 tx:36 gso:1
ipv4 tx:37 gso:1 (fail)
OK
ipv6 cmsg
device mtu (orig): 65536
device mtu (test): 1500
ipv6 tx:1 gso:0
ipv6 tx:1452 gso:0
ipv6 tx:1453 gso:0 (fail)
ipv6 tx:1452 gso:1452 (fail)
ipv6 tx:1453 gso:1452
ipv6 tx:2904 gso:1452
ipv6 tx:2905 gso:1452
ipv6 tx:65340 gso:1452
ipv6 tx:65527 gso:1452
ipv6 tx:65528 gso:1452 (fail)
ipv6 tx:1 gso:1 (fail)
ipv6 tx:2 gso:1
ipv6 tx:5 gso:2
ipv6 tx:16 gso:1
ipv6 tx:17 gso:1 (fail)
OK
ipv6 setsockopt
device mtu (orig): 65536
device mtu (test): 1500
ipv6 tx:1 gso:0
ipv6 tx:1452 gso:0
ipv6 tx:1453 gso:0 (fail)
ipv6 tx:1452 gso:1452 (fail)
ipv6 tx:1453 gso:1452
ipv6 tx:2904 gso:1452
ipv6 tx:2905 gso:1452
ipv6 tx:65340 gso:1452
ipv6 tx:65527 gso:1452
ipv6 tx:65528 gso:1452 (fail)
ipv6 tx:1 gso:1 (fail)
ipv6 tx:2 gso:1
ipv6 tx:5 gso:2
ipv6 tx:16 gso:1
ipv6 tx:17 gso:1 (fail)
OK
ipv4 connected
device mtu (orig): 65536
device mtu (test): 1600
route mtu (test): 1500
path mtu (read): 1500
ipv4 tx:1 gso:0
ipv4 tx:1472 gso:0
ipv4 tx:1473 gso:0 (fail)
ipv4 tx:1472 gso:1472 (fail)
ipv4 tx:1473 gso:1472
ipv4 tx:2944 gso:1472
ipv4 tx:2945 gso:1472
ipv4 tx:64768 gso:1472
ipv4 tx:65507 gso:1472
ipv4 tx:65508 gso:1472 (fail)
ipv4 tx:1 gso:1 (fail)
ipv4 tx:2 gso:1
ipv4 tx:5 gso:2
ipv4 tx:36 gso:1
ipv4 tx:37 gso:1 (fail)
OK
ipv4 msg_more
device mtu (orig): 65536
device mtu (test): 1500
ipv4 tx:1 gso:0
ipv4 tx:1472 gso:0
ipv4 tx:1473 gso:0 (fail)
ipv4 tx:1472 gso:1472 (fail)
ipv4 tx:1473 gso:1472
ipv4 tx:2944 gso:1472
ipv4 tx:2945 gso:1472
ipv4 tx:64768 gso:1472
ipv4 tx:65507 gso:1472
ipv4 tx:65508 gso:1472 (fail)
ipv4 tx:1 gso:1 (fail)
ipv4 tx:2 gso:1
ipv4 tx:5 gso:2
ipv4 tx:36 gso:1
ipv4 tx:37 gso:1 (fail)
OK
ipv6 msg_more
device mtu (orig): 65536
device mtu (test): 1500
ipv6 tx:1 gso:0
ipv6 tx:1452 gso:0
ipv6 tx:1453 gso:0 (fail)
ipv6 tx:1452 gso:1452 (fail)
ipv6 tx:1453 gso:1452
ipv6 tx:2904 gso:1452
ipv6 tx:2905 gso:1452
ipv6 tx:65340 gso:1452
ipv6 tx:65527 gso:1452
ipv6 tx:65528 gso:1452 (fail)
ipv6 tx:1 gso:1 (fail)
ipv6 tx:2 gso:1
ipv6 tx:5 gso:2
ipv6 tx:16 gso:1
ipv6 tx:17 gso:1 (fail)
OK
ok 1..15 selftests: net: udpgso.sh [PASS]
selftests: net: ip_defrag.sh
========================================
ipv4 defrag
PASS
seed = 1543126975
ipv4 defrag with overlaps
PASS
seed = 1543126985
ipv6 defrag
PASS
seed = 1543127011
ipv6 defrag with overlaps
PASS
seed = 1543127012
ok 1..16 selftests: net: ip_defrag.sh [PASS]
selftests: net: udpgso_bench.sh
========================================
ipv4
tcp
tcp tx: 239 MB/s 4054 calls/s 4054 msg/s
tcp rx: 239 MB/s 3869 calls/s
tcp tx: 337 MB/s 5726 calls/s 5726 msg/s
tcp rx: 337 MB/s 5726 calls/s
tcp tx: 525 MB/s 8906 calls/s 8906 msg/s
tcp rx: 526 MB/s 8935 calls/s
tcp zerocopy
tcp tx: 414 MB/s 7026 calls/s 7026 msg/s
tcp rx: 414 MB/s 5158 calls/s
tcp tx: 393 MB/s 6680 calls/s 6680 msg/s
tcp rx: 396 MB/s 4656 calls/s
tcp tx: 317 MB/s 5380 calls/s 5380 msg/s
tcp rx: 315 MB/s 3494 calls/s
udp
udp rx: 79 MB/s 56504 calls/s
udp tx: 85 MB/s 60606 calls/s 1443 msg/s
udp rx: 60 MB/s 42889 calls/s
udp tx: 64 MB/s 45948 calls/s 1094 msg/s
udp rx: 137 MB/s 98006 calls/s
udp tx: 147 MB/s 104790 calls/s 2495 msg/s
udp rx: 144 MB/s 102755 calls/s
udp gso
udp rx: 231 MB/s 164826 calls/s
udp tx: 248 MB/s 4219 calls/s 4219 msg/s
udp rx: 206 MB/s 146803 calls/s
udp tx: 206 MB/s 3496 calls/s 3496 msg/s
udp rx: 154 MB/s 109737 calls/s
udp tx: 168 MB/s 2857 calls/s 2857 msg/s
udp rx: 188 MB/s 134299 calls/s
ipv6
tcp
tcp tx: 662 MB/s 11238 calls/s 11238 msg/s
tcp rx: 663 MB/s 7709 calls/s
tcp tx: 1192 MB/s 20224 calls/s 20224 msg/s
tcp rx: 1198 MB/s 15037 calls/s
tcp tx: 950 MB/s 16115 calls/s 16115 msg/s
tcp rx: 945 MB/s 11394 calls/s
tcp zerocopy
tcp rx: 521 MB/s 4703 calls/s
tcp tx: 522 MB/s 8856 calls/s 8856 msg/s
tcp tx: 519 MB/s 8812 calls/s 8812 msg/s
tcp rx: 521 MB/s 5693 calls/s
tcp tx: 511 MB/s 8683 calls/s 8683 msg/s
tcp rx: 514 MB/s 5419 calls/s
udp
udp rx: 23 MB/s 17459 calls/s
udp tx: 27 MB/s 20124 calls/s 468 msg/s
udp rx: 53 MB/s 38829 calls/s
udp tx: 63 MB/s 46225 calls/s 1075 msg/s
udp rx: 44 MB/s 32262 calls/s
udp tx: 46 MB/s 34142 calls/s 794 msg/s
udp rx: 58 MB/s 42382 calls/s
udp gso
udp rx: 177 MB/s 129328 calls/s
udp tx: 197 MB/s 3343 calls/s 3343 msg/s
udp rx: 153 MB/s 111713 calls/s
udp tx: 163 MB/s 2767 calls/s 2767 msg/s
udp rx: 181 MB/s 132271 calls/s
udp tx: 179 MB/s 3049 calls/s 3049 msg/s
udp rx: 76 MB/s 56152 calls/s
udp tx: 93 MB/s 1593 calls/s 1593 msg/s
ok 1..17 selftests: net: udpgso_bench.sh [PASS]
selftests: net: fib_rule_tests.sh
========================================
######################################################################
TEST SECTION: IPv4 fib rule
######################################################################
TEST: rule4 check: oif dummy0 [ OK ]
TEST: rule4 del by pref: oif dummy0 [ OK ]
RTNETLINK answers: No route to host
TEST: rule4 check: from 192.51.100.3 iif dummy0 [FAIL]
TEST: rule4 del by pref: from 192.51.100.3 iif dummy0 [ OK ]
TEST: rule4 check: tos 0x10 [ OK ]
TEST: rule4 del by pref: tos 0x10 [ OK ]
TEST: rule4 check: fwmark 0x64 [ OK ]
TEST: rule4 del by pref: fwmark 0x64 [ OK ]
TEST: rule4 check: uidrange 100-100 [ OK ]
TEST: rule4 del by pref: uidrange 100-100 [ OK ]
TEST: rule4 check: sport 666 dport 777 [ OK ]
TEST: rule4 del by pref: sport 666 dport 777 [ OK ]
TEST: rule4 check: ipproto tcp [ OK ]
TEST: rule4 del by pref: ipproto tcp [ OK ]
TEST: rule4 check: ipproto icmp [ OK ]
TEST: rule4 del by pref: ipproto icmp [ OK ]
######################################################################
TEST SECTION: IPv6 fib rule
######################################################################
TEST: rule6 check: oif dummy0 [ OK ]
TEST: rule6 del by pref: oif dummy0 [ OK ]
TEST: rule6 check: from 2001:db8:1::3 iif dummy0 [ OK ]
TEST: rule6 del by pref: from 2001:db8:1::3 iif dummy0 [ OK ]
TEST: rule6 check: tos 0x10 [ OK ]
TEST: rule6 del by pref: tos 0x10 [ OK ]
TEST: rule6 check: fwmark 0x64 [ OK ]
TEST: rule6 del by pref: fwmark 0x64 [ OK ]
TEST: rule6 check: uidrange 100-100 [ OK ]
TEST: rule6 del by pref: uidrange 100-100 [ OK ]
TEST: rule6 check: sport 666 dport 777 [ OK ]
TEST: rule6 del by pref: sport 666 dport 777 [ OK ]
TEST: rule6 check: ipproto tcp [ OK ]
TEST: rule6 del by pref: ipproto tcp [ OK ]
TEST: rule6 check: ipproto icmp [ OK ]
TEST: rule6 del by pref: ipproto icmp [ OK ]
ok 1..18 selftests: net: fib_rule_tests.sh [PASS]
selftests: net: msg_zerocopy.sh
========================================
ipv4 tcp -t 1
./msg_zerocopy: setaffinity 2
./msg_zerocopy: setaffinity 3
not ok 1..19 selftests: net: msg_zerocopy.sh [FAIL]
selftests: net: psock_snd.sh
========================================
dgram
tx: 128
rx: 142
rx: 100
OK
dgram bind
tx: 128
rx: 142
rx: 100
OK
raw
tx: 142
rx: 142
rx: 100
OK
raw bind
tx: 142
rx: 142
rx: 100
OK
raw qdisc bypass
tx: 142
rx: 142
rx: 100
OK
raw vlan
tx: 146
rx: 100
OK
raw vnet hdr
tx: 152
rx: 142
rx: 100
OK
raw csum_off
tx: 152
rx: 142
rx: 100
OK
raw csum_off with bad offset (fails)
./psock_snd: write: Invalid argument
raw min size
tx: 42
rx: 0
OK
raw mtu size
tx: 1514
rx: 1472
OK
raw mtu size + 1 (fails)
./psock_snd: write: Message too long
raw vlan mtu size + 1 (fails)
./psock_snd: write: Message too long
dgram mtu size
tx: 1500
rx: 1472
OK
dgram mtu size + 1 (fails)
./psock_snd: write: Message too long
raw truncate hlen (fails: does not arrive)
tx: 14
./psock_snd: recv: Resource temporarily unavailable
raw truncate hlen - 1 (fails: EINVAL)
./psock_snd: write: Invalid argument
raw gso min size
tx: 1525
rx: 1473
OK
raw gso min size - 1 (fails)
tx: 1524
./psock_snd: recv: Resource temporarily unavailable
raw gso max size
tx: 65559
rx: 65507
OK
raw gso max size + 1 (fails)
tx: 65560
./psock_snd: recv: Resource temporarily unavailable
OK. All tests passed
ok 1..20 selftests: net: psock_snd.sh [PASS]
selftests: net: udpgro_bench.sh
========================================
Missing xdp_dummy helper. Build bpf selftest first
not ok 1..21 selftests: net: udpgro_bench.sh [FAIL]
selftests: net: udpgro.sh
========================================
Missing xdp_dummy helper. Build bpf selftest first
not ok 1..22 selftests: net: udpgro.sh [FAIL]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/net'
2018-11-25 06:24:29 make run_tests -C nsfs
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/nsfs'
gcc -Wall -Werror owner.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/nsfs/owner
gcc -Wall -Werror pidns.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/nsfs/pidns
TAP version 13
selftests: nsfs: owner
========================================
ok 1..1 selftests: nsfs: owner [PASS]
selftests: nsfs: pidns
========================================
ok 1..2 selftests: nsfs: pidns [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/nsfs'
ignored_by_lkp powerpc test
prctl test: not in Makefile
2018-11-25 06:24:32 make TARGETS=prctl
make[1]: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/prctl'
Makefile:14: warning: overriding recipe for target 'clean'
../lib.mk:137: warning: ignoring old recipe for target 'clean'
gcc disable-tsc-ctxt-sw-stress-test.c -o disable-tsc-ctxt-sw-stress-test
gcc disable-tsc-on-off-stress-test.c -o disable-tsc-on-off-stress-test
gcc disable-tsc-test.c -o disable-tsc-test
make[1]: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/prctl'
2018-11-25 06:24:36 make run_tests -C prctl
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/prctl'
Makefile:14: warning: overriding recipe for target 'clean'
../lib.mk:137: warning: ignoring old recipe for target 'clean'
TAP version 13
selftests: prctl: disable-tsc-ctxt-sw-stress-test
========================================
[No further output means we're allright]
ok 1..1 selftests: prctl: disable-tsc-ctxt-sw-stress-test [PASS]
selftests: prctl: disable-tsc-on-off-stress-test
========================================
[No further output means we're allright]
ok 1..2 selftests: prctl: disable-tsc-on-off-stress-test [PASS]
selftests: prctl: disable-tsc-test
========================================
rdtsc() == 2263521991166
prctl(PR_GET_TSC, &tsc_val); tsc_val == PR_TSC_ENABLE
rdtsc() == 2263523413446
prctl(PR_SET_TSC, PR_TSC_ENABLE)
rdtsc() == 2263523838340
prctl(PR_SET_TSC, PR_TSC_SIGSEGV)
rdtsc() == [ SIG_SEGV ]
prctl(PR_GET_TSC, &tsc_val); tsc_val == PR_TSC_SIGSEGV
prctl(PR_SET_TSC, PR_TSC_ENABLE)
rdtsc() == 2263525223214
ok 1..3 selftests: prctl: disable-tsc-test [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/prctl'
2018-11-25 06:25:23 make run_tests -C proc
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/proc'
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE fd-001-lookup.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/proc/fd-001-lookup
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE fd-002-posix-eq.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/proc/fd-002-posix-eq
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE fd-003-kthread.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/proc/fd-003-kthread
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-loadavg-001.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/proc/proc-loadavg-001
proc-loadavg-001.c:17:0: warning: "_GNU_SOURCE" redefined
#define _GNU_SOURCE
<command-line>:0:0: note: this is the location of the previous definition
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-self-map-files-001.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/proc/proc-self-map-files-001
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-self-map-files-002.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/proc/proc-self-map-files-002
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-self-syscall.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/proc/proc-self-syscall
proc-self-syscall.c:16:0: warning: "_GNU_SOURCE" redefined
#define _GNU_SOURCE
<command-line>:0:0: note: this is the location of the previous definition
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-self-wchan.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/proc/proc-self-wchan
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-uptime-001.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/proc/proc-uptime-001
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-uptime-002.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/proc/proc-uptime-002
proc-uptime-002.c:18:0: warning: "_GNU_SOURCE" redefined
#define _GNU_SOURCE
<command-line>:0:0: note: this is the location of the previous definition
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE read.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/proc/read
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE self.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/proc/self
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE thread-self.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/proc/thread-self
TAP version 13
selftests: proc: fd-001-lookup
========================================
ok 1..1 selftests: proc: fd-001-lookup [PASS]
selftests: proc: fd-002-posix-eq
========================================
ok 1..2 selftests: proc: fd-002-posix-eq [PASS]
selftests: proc: fd-003-kthread
========================================
ok 1..3 selftests: proc: fd-003-kthread [PASS]
selftests: proc: proc-loadavg-001
========================================
ok 1..4 selftests: proc: proc-loadavg-001 [PASS]
selftests: proc: proc-self-map-files-001
========================================
ok 1..5 selftests: proc: proc-self-map-files-001 [PASS]
selftests: proc: proc-self-map-files-002
========================================
ok 1..6 selftests: proc: proc-self-map-files-002 [PASS]
selftests: proc: proc-self-syscall
========================================
ok 1..7 selftests: proc: proc-self-syscall [PASS]
selftests: proc: proc-self-wchan
========================================
ok 1..8 selftests: proc: proc-self-wchan [PASS]
selftests: proc: proc-uptime-001
========================================
ok 1..9 selftests: proc: proc-uptime-001 [PASS]
selftests: proc: proc-uptime-002
========================================
ok 1..10 selftests: proc: proc-uptime-002 [PASS]
selftests: proc: read
========================================
ok 1..11 selftests: proc: read [PASS]
selftests: proc: self
========================================
ok 1..12 selftests: proc: self [PASS]
selftests: proc: thread-self
========================================
ok 1..13 selftests: proc: thread-self [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/proc'
2018-11-25 06:25:58 make run_tests -C pstore
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/pstore'
TAP version 13
selftests: pstore: pstore_tests
========================================
=== Pstore unit tests (pstore_tests) ===
UUID=c06d19a6-59ea-4ba4-98a2-c8cc45396400
Checking pstore backend is registered ... ok
backend=ramoops
cmdline=ip=::::vm-lkp-hsw-4ep1-8G-21::dhcp root=/dev/ram0 user=lkp job=/lkp/jobs/scheduled/vm-lkp-hsw-4ep1-8G-21/kernel_selftests-kselftests-02-debian-x86_64-2018-04-03.cgz-3327a9c46352f111697d93d6134e7bf37c6bffca-20181125-14065-1lwvqom-3.yaml ARCH=x86_64 kconfig=x86_64-rhel-7.2 branch=linux-devel/devel-hourly-2018112308 commit=3327a9c46352f111697d93d6134e7bf37c6bffca BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-7/3327a9c46352f111697d93d6134e7bf37c6bffca/vmlinuz-4.20.0-rc1-00121-g3327a9c erst_disable max_uptime=3600 RESULT_ROOT=/result/kernel_selftests/kselftests-02/vm-lkp-hsw-4ep1-8G/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.2/gcc-7/3327a9c46352f111697d93d6134e7bf37c6bffca/3 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw rcuperf.shutdown=0
Checking pstore console is registered ... ok
Checking /dev/pmsg0 exists ... ok
Writing unique string to /dev/pmsg0 ... ok
ok 1..1 selftests: pstore: pstore_tests [PASS]
selftests: pstore: pstore_post_reboot_tests
========================================
=== Pstore unit tests (pstore_post_reboot_tests) ===
UUID=3f8df27d-d0cc-4a63-bbf7-1297dcddaeba
Checking pstore backend is registered ... ok
backend=ramoops
cmdline=ip=::::vm-lkp-hsw-4ep1-8G-21::dhcp root=/dev/ram0 user=lkp job=/lkp/jobs/scheduled/vm-lkp-hsw-4ep1-8G-21/kernel_selftests-kselftests-02-debian-x86_64-2018-04-03.cgz-3327a9c46352f111697d93d6134e7bf37c6bffca-20181125-14065-1lwvqom-3.yaml ARCH=x86_64 kconfig=x86_64-rhel-7.2 branch=linux-devel/devel-hourly-2018112308 commit=3327a9c46352f111697d93d6134e7bf37c6bffca BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-7/3327a9c46352f111697d93d6134e7bf37c6bffca/vmlinuz-4.20.0-rc1-00121-g3327a9c erst_disable max_uptime=3600 RESULT_ROOT=/result/kernel_selftests/kselftests-02/vm-lkp-hsw-4ep1-8G/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.2/gcc-7/3327a9c46352f111697d93d6134e7bf37c6bffca/3 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw rcuperf.shutdown=0
pstore_crash_test has not been executed yet. we skip further tests.
not ok 1..2 selftests: pstore: pstore_post_reboot_tests [SKIP]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/pstore'
ptp test: not in Makefile
2018-11-25 06:25:59 make TARGETS=ptp
make[1]: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/ptp'
Makefile:10: warning: overriding recipe for target 'clean'
../lib.mk:137: warning: ignoring old recipe for target 'clean'
gcc -I../../../../usr/include/ testptp.c -lrt -o testptp
make[1]: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/ptp'
2018-11-25 06:26:02 make run_tests -C ptp
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/ptp'
Makefile:10: warning: overriding recipe for target 'clean'
../lib.mk:137: warning: ignoring old recipe for target 'clean'
TAP version 13
selftests: ptp: testptp
========================================
ok 1..1 selftests: ptp: testptp [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/ptp'
2018-11-25 06:26:03 make run_tests -C ptrace
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/ptrace'
gcc -iquote../../../../include/uapi -Wall peeksiginfo.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/ptrace/peeksiginfo
TAP version 13
selftests: ptrace: peeksiginfo
========================================
PASS
ok 1..1 selftests: ptrace: peeksiginfo [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/ptrace'
2018-11-25 06:26:04 make run_tests -C rseq
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/rseq'
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ -shared -fPIC rseq.c -lpthread -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/rseq/librseq.so
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ basic_test.c -lpthread -lrseq -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/rseq/basic_test
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ basic_percpu_ops_test.c -lpthread -lrseq -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/rseq/basic_percpu_ops_test
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ param_test.c -lpthread -lrseq -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/rseq/param_test
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ -DBENCHMARK param_test.c -lpthread -lrseq -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/rseq/param_test_benchmark
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ -DRSEQ_COMPARE_TWICE param_test.c -lpthread -lrseq -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/rseq/param_test_compare_twice
TAP version 13
selftests: rseq: basic_test
========================================
testing current cpu
ok 1..1 selftests: rseq: basic_test [PASS]
selftests: rseq: basic_percpu_ops_test
========================================
spinlock
percpu_list
ok 1..2 selftests: rseq: basic_percpu_ops_test [PASS]
selftests: rseq: param_test
========================================
ok 1..3 selftests: rseq: param_test [PASS]
selftests: rseq: param_test_benchmark
========================================
ok 1..4 selftests: rseq: param_test_benchmark [PASS]
selftests: rseq: param_test_compare_twice
========================================
ok 1..5 selftests: rseq: param_test_compare_twice [PASS]
selftests: rseq: run_param_test.sh
========================================
Default parameters
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Loop injection: 10000 loops
Injecting at <1>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <2>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <3>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <4>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <5>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <6>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Yield injection (25%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Yield injection (50%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Yield injection (100%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Kill injection (25%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Kill injection (50%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Kill injection (100%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Sleep injection (1ms, 25%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Sleep injection (1ms, 50%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Sleep injection (1ms, 100%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
ok 1..6 selftests: rseq: run_param_test.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/rseq'
2018-11-25 06:54:41 make run_tests -C rtc
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/rtc'
gcc -O3 -Wl,-no-as-needed -Wall -lrt -lpthread -lm rtctest.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/rtc/rtctest
gcc -O3 -Wl,-no-as-needed -Wall -lrt -lpthread -lm setdate.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/rtc/setdate
TAP version 13
selftests: rtc: rtctest
========================================
rtctest.c:49:rtc.date_read:Current RTC date/time is 25/11/2018 06:54:47.
rtctest.c:137:rtc.alarm_alm_set:Alarm time now set to 06:54:56.
rtctest.c:198:rtc.alarm_wkalm_set:Alarm time now set to 25/11/2018 06:54:59.
[==========] Running 5 tests from 2 test cases.
[ RUN ] rtc.date_read
[ OK ] rtc.date_read
[ RUN ] rtc.uie_read
[ OK ] rtc.uie_read
[ RUN ] rtc.uie_select
[ OK ] rtc.uie_select
[ RUN ] rtc.alarm_alm_set
[ OK ] rtc.alarm_alm_set
[ RUN ] rtc.alarm_wkalm_set
[ OK ] rtc.alarm_wkalm_set
[==========] 5 / 5 tests passed.
[ PASSED ]
ok 1..1 selftests: rtc: rtctest [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/rtc'
2018-11-25 06:54:59 make run_tests -C seccomp
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/seccomp'
gcc -Wl,-no-as-needed -Wall -lpthread seccomp_bpf.c -o seccomp_bpf
gcc -Wl,-no-as-needed -Wall seccomp_benchmark.c -o seccomp_benchmark
TAP version 13
selftests: seccomp: seccomp_bpf
========================================
[==========] Running 64 tests from 1 test cases.
[ RUN ] global.mode_strict_support
[ OK ] global.mode_strict_support
[ RUN ] global.mode_strict_cannot_call_prctl
[ OK ] global.mode_strict_cannot_call_prctl
[ RUN ] global.no_new_privs_support
[ OK ] global.no_new_privs_support
[ RUN ] global.mode_filter_support
[ OK ] global.mode_filter_support
[ RUN ] global.mode_filter_without_nnp
[ OK ] global.mode_filter_without_nnp
[ RUN ] global.filter_size_limits
[ OK ] global.filter_size_limits
[ RUN ] global.filter_chain_limits
[ OK ] global.filter_chain_limits
[ RUN ] global.mode_filter_cannot_move_to_strict
[ OK ] global.mode_filter_cannot_move_to_strict
[ RUN ] global.mode_filter_get_seccomp
[ OK ] global.mode_filter_get_seccomp
[ RUN ] global.ALLOW_all
[ OK ] global.ALLOW_all
[ RUN ] global.empty_prog
[ OK ] global.empty_prog
[ RUN ] global.log_all
[ OK ] global.log_all
[ RUN ] global.unknown_ret_is_kill_inside
[ OK ] global.unknown_ret_is_kill_inside
[ RUN ] global.unknown_ret_is_kill_above_allow
[ OK ] global.unknown_ret_is_kill_above_allow
[ RUN ] global.KILL_all
[ OK ] global.KILL_all
[ RUN ] global.KILL_one
[ OK ] global.KILL_one
[ RUN ] global.KILL_one_arg_one
[ OK ] global.KILL_one_arg_one
[ RUN ] global.KILL_one_arg_six
[ OK ] global.KILL_one_arg_six
[ RUN ] global.KILL_thread
[==========] Running 64 tests from 1 test cases.
[ RUN ] global.mode_strict_support
[ OK ] global.mode_strict_support
[ RUN ] global.mode_strict_cannot_call_prctl
[ OK ] global.mode_strict_cannot_call_prctl
[ RUN ] global.no_new_privs_support
[ OK ] global.no_new_privs_support
[ RUN ] global.mode_filter_support
[ OK ] global.mode_filter_support
[ RUN ] global.mode_filter_without_nnp
[ OK ] global.mode_filter_without_nnp
[ RUN ] global.filter_size_limits
[ OK ] global.filter_size_limits
[ RUN ] global.filter_chain_limits
[ OK ] global.filter_chain_limits
[ RUN ] global.mode_filter_cannot_move_to_strict
[ OK ] global.mode_filter_cannot_move_to_strict
[ RUN ] global.mode_filter_get_seccomp
[ OK ] global.mode_filter_get_seccomp
[ RUN ] global.ALLOW_all
[ OK ] global.ALLOW_all
[ RUN ] global.empty_prog
[ OK ] global.empty_prog
[ RUN ] global.log_all
[ OK ] global.log_all
[ RUN ] global.unknown_ret_is_kill_inside
[ OK ] global.unknown_ret_is_kill_inside
[ RUN ] global.unknown_ret_is_kill_above_allow
[ OK ] global.unknown_ret_is_kill_above_allow
[ RUN ] global.KILL_all
[ OK ] global.KILL_all
[ RUN ] global.KILL_one
[ OK ] global.KILL_one
[ RUN ] global.KILL_one_arg_one
[ OK ] global.KILL_one_arg_one
[ RUN ] global.KILL_one_arg_six
[ OK ] global.KILL_one_arg_six
[ RUN ] global.KILL_thread
[ OK ] global.KILL_thread
[ RUN ] global.KILL_process
[ OK ] global.KILL_process
[ RUN ] global.arg_out_of_range
[ OK ] global.arg_out_of_range
[ RUN ] global.ERRNO_valid
[ OK ] global.ERRNO_valid
[ RUN ] global.ERRNO_zero
[ OK ] global.ERRNO_zero
[ RUN ] global.ERRNO_capped
[ OK ] global.ERRNO_capped
[ RUN ] global.ERRNO_order
[ OK ] global.ERRNO_order
[ RUN ] TRAP.dfl
[ OK ] TRAP.dfl
[ RUN ] TRAP.ign
[ OK ] TRAP.ign
[ RUN ] TRAP.handler
[ OK ] TRAP.handler
[ RUN ] precedence.allow_ok
[ OK ] precedence.allow_ok
[ RUN ] precedence.kill_is_highest
[ OK ] precedence.kill_is_highest
[ RUN ] precedence.kill_is_highest_in_any_order
[ OK ] precedence.kill_is_highest_in_any_order
[ RUN ] precedence.trap_is_second
[ OK ] precedence.trap_is_second
[ RUN ] precedence.trap_is_second_in_any_order
[ OK ] precedence.trap_is_second_in_any_order
[ RUN ] precedence.errno_is_third
[ OK ] precedence.errno_is_third
[ RUN ] precedence.errno_is_third_in_any_order
[ OK ] precedence.errno_is_third_in_any_order
[ RUN ] precedence.trace_is_fourth
[ OK ] precedence.trace_is_fourth
[ RUN ] precedence.trace_is_fourth_in_any_order
[ OK ] precedence.trace_is_fourth_in_any_order
[ RUN ] precedence.log_is_fifth
[ OK ] precedence.log_is_fifth
[ RUN ] precedence.log_is_fifth_in_any_order
[ OK ] precedence.log_is_fifth_in_any_order
[ RUN ] TRACE_poke.read_has_side_effects
[ OK ] TRACE_poke.read_has_side_effects
[ RUN ] TRACE_poke.getpid_runs_normally
[ OK ] TRACE_poke.getpid_runs_normally
[ RUN ] TRACE_syscall.ptrace_syscall_redirected
[ OK ] TRACE_syscall.ptrace_syscall_redirected
[ RUN ] TRACE_syscall.ptrace_syscall_dropped
[ OK ] TRACE_syscall.ptrace_syscall_dropped
[ RUN ] TRACE_syscall.syscall_allowed
[ OK ] TRACE_syscall.syscall_allowed
[ RUN ] TRACE_syscall.syscall_redirected
[ OK ] TRACE_syscall.syscall_redirected
[ RUN ] TRACE_syscall.syscall_dropped
[ OK ] TRACE_syscall.syscall_dropped
[ RUN ] TRACE_syscall.skip_after_RET_TRACE
[ OK ] TRACE_syscall.skip_after_RET_TRACE
[ RUN ] TRACE_syscall.kill_after_RET_TRACE
[ OK ] TRACE_syscall.kill_after_RET_TRACE
[ RUN ] TRACE_syscall.skip_after_ptrace
[ OK ] TRACE_syscall.skip_after_ptrace
[ RUN ] TRACE_syscall.kill_after_ptrace
[ OK ] TRACE_syscall.kill_after_ptrace
[ RUN ] global.secseccomp_bpf.c:2736:global.syscall_restart:Expected getpid() (22342) == info._sifields._kill.si_pid (0)
global.syscall_restart: Test failed at step #22
comp_syscall
[ OK ] global.seccomp_syscall
[ RUN ] global.seccomp_syscall_mode_lock
[ OK ] global.seccomp_syscall_mode_lock
[ RUN ] global.detect_seccomp_filter_flags
[ OK ] global.detect_seccomp_filter_flags
[ RUN ] global.TSYNC_first
[ OK ] global.TSYNC_first
[ RUN ] TSYNC.siblings_fail_prctl
[ OK ] TSYNC.siblings_fail_prctl
[ RUN ] TSYNC.two_siblings_with_ancestor
[ OK ] TSYNC.two_siblings_with_ancestor
[ RUN ] TSYNC.two_sibling_want_nnp
[ OK ] TSYNC.two_sibling_want_nnp
[ RUN ] TSYNC.two_siblings_with_no_filter
[ OK ] TSYNC.two_siblings_with_no_filter
[ RUN ] TSYNC.two_siblings_with_one_divergence
[ OK ] TSYNC.two_siblings_with_one_divergence
[ RUN ] TSYNC.two_siblings_not_under_filter
[ OK ] TSYNC.two_siblings_not_under_filter
[ RUN ] global.syscall_restart
[ FAIL ] global.syscall_restart
[ RUN ] global.filter_flag_log
[ OK ] global.filter_flag_log
[ RUN ] global.get_action_avail
[ OK ] global.get_action_avail
[ RUN ] global.get_metadata
[ OK ] global.get_metadata
[==========] 63 / 64 tests passed.
[ FAILED ]
not ok 1..1 selftests: seccomp: seccomp_bpf [FAIL]
selftests: seccomp: seccomp_benchmark
========================================
Calibrating reasonable sample size...
1543128909.317325933 - 1543128909.317200216 = 125717
1543128909.317496743 - 1543128909.317461013 = 35730
1543128909.317574133 - 1543128909.317498523 = 75610
1543128909.317729926 - 1543128909.317575769 = 154157
1543128909.318082970 - 1543128909.317731616 = 351354
1543128909.318989291 - 1543128909.318084880 = 904411
1543128909.320316486 - 1543128909.318991458 = 1325028
1543128909.323085089 - 1543128909.320318592 = 2766497
1543128909.328342417 - 1543128909.323087262 = 5255155
1543128909.338631380 - 1543128909.328344454 = 10286926
1543128909.361887878 - 1543128909.338637194 = 23250684
1543128909.402940252 - 1543128909.361923848 = 41016404
1543128909.487987400 - 1543128909.402997059 = 84990341
1543128909.657097419 - 1543128909.488162767 = 168934652
1543128909.997075359 - 1543128909.657341769 = 339733590
1543128910.779960691 - 1543128909.997288089 = 782672602
1543128912.322551681 - 1543128910.780210892 = 1542340789
1543128915.229506784 - 1543128912.322747004 = 2906759780
1543128921.289955026 - 1543128915.229658184 = 6060296842
Benchmarking 8388608 samples...
17.946393108 - 11.819542274 = 6126850834
getpid native: 730 ns
27.544575519 - 17.948532020 = 9596043499
getpid RET_ALLOW: 1143 ns
Estimated seccomp overhead per syscall: 413 ns
ok 1..2 selftests: seccomp: seccomp_benchmark [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/seccomp'
2018-11-25 06:55:38 make run_tests -C sigaltstack
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sigaltstack'
gcc -Wall sas.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sigaltstack/sas
TAP version 13
selftests: sigaltstack: sas
========================================
ok 1 Initial sigaltstack state was SS_DISABLE
# [RUN] signal USR1
ok 2 sigaltstack is disabled in sighandler
# [RUN] switched to user ctx
# [RUN] signal USR2
# [OK] Stack preserved
ok 3 sigaltstack is still SS_AUTODISARM after signal
Pass 3 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
1..3
ok 1..1 selftests: sigaltstack: sas [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sigaltstack'
2018-11-25 06:55:40 make run_tests -C size
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/size'
gcc -static -ffreestanding -nostartfiles -s get_size.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/size/get_size
TAP version 13
selftests: size: get_size
========================================
TAP version 13
# Testing system size.
ok 1 get runtime memory use
# System runtime memory report (units in Kilobytes):
---
Total: 8161920
Free: 6009188
Buffer: 0
In use: 2152732
...
1..1
ok 1..1 selftests: size: get_size [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/size'
2018-11-25 06:55:40 make run_tests -C sparc64
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sparc64'
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sparc64'
2018-11-25 06:55:41 make run_tests -C splice
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/splice'
gcc default_file_splice_read.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/splice/default_file_splice_read
TAP version 13
selftests: splice: default_file_splice_read.sh
========================================
ok 1..1 selftests: splice: default_file_splice_read.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/splice'
2018-11-25 06:55:42 make run_tests -C static_keys
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/static_keys'
TAP version 13
selftests: static_keys: test_static_keys.sh
========================================
static_key: ok
ok 1..1 selftests: static_keys: test_static_keys.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/static_keys'
2018-11-25 06:55:43 make run_tests -C sync
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync'
gcc -c sync_alloc.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync_alloc.o
gcc -c sync_fence.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync_fence.o
gcc -c sync_merge.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync_merge.o
gcc -c sync_wait.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync_wait.o
gcc -c sync_stress_parallelism.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync_stress_parallelism.o
gcc -c sync_stress_consumer.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync_stress_consumer.o
gcc -c sync_stress_merge.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync_stress_merge.o
gcc -c sync_test.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync_test.o -O2 -g -std=gnu89 -pthread -Wall -Wextra -I../../../../usr/include/
gcc -c sync.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync.o -O2 -g -std=gnu89 -pthread -Wall -Wextra -I../../../../usr/include/
gcc -o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync_test /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync_test.o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync.o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync_alloc.o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync_fence.o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync_merge.o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync_wait.o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync_stress_parallelism.o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync_stress_consumer.o /usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync/sync_stress_merge.o -O2 -g -std=gnu89 -pthread -Wall -Wextra -I../../../../usr/include/ -pthread
TAP version 13
selftests: sync: sync_test
========================================
# [RUN] Testing sync framework
ok 1 [RUN] test_alloc_timeline
ok 2 [RUN] test_alloc_fence
ok 3 [RUN] test_alloc_fence_negative
ok 4 [RUN] test_fence_one_timeline_wait
ok 5 [RUN] test_fence_one_timeline_merge
ok 6 [RUN] test_fence_merge_same_fence
ok 7 [RUN] test_fence_multi_timeline_wait
ok 8 [RUN] test_stress_two_threads_shared_timeline
ok 9 [RUN] test_consumer_stress_multi_producer_single_consumer
ok 10 [RUN] test_merge_stress_random_merge
Pass 10 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
1..10
ok 1..1 selftests: sync: sync_test [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sync'
2018-11-25 06:55:53 make run_tests -C sysctl
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sysctl'
TAP version 13
selftests: sysctl: sysctl.sh
========================================
Checking production write strict setting ... ok
Sun Nov 25 06:55:54 UTC 2018
Running test: sysctl_test_0001 - run #0
== Testing sysctl behavior against /proc/sys/debug/test_sysctl/int_0001 ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Checking ignoring spaces up to PAGE_SIZE works on write ...ok
Checking passing PAGE_SIZE of spaces fails on write ...ok
Sun Nov 25 06:55:54 UTC 2018
Running test: sysctl_test_0002 - run #0
== Testing sysctl behavior against /proc/sys/debug/test_sysctl/string_0001 ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Writing entire sysctl in short writes ... ok
Writing middle of sysctl after unsynchronized seek ... ok
Checking sysctl maxlen is at least 65 ... ok
Checking sysctl keeps original string on overflow append ... ok
Checking sysctl stays NULL terminated on write ... ok
Checking sysctl stays NULL terminated on overwrite ... ok
Sun Nov 25 06:55:55 UTC 2018
Running test: sysctl_test_0003 - run #0
== Testing sysctl behavior against /proc/sys/debug/test_sysctl/int_0002 ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Checking ignoring spaces up to PAGE_SIZE works on write ...ok
Checking passing PAGE_SIZE of spaces fails on write ...ok
Testing INT_MAX works ...ok
Testing INT_MAX + 1 will fail as expected...ok
Testing negative values will work as expected...ok
Sun Nov 25 06:55:55 UTC 2018
Running test: sysctl_test_0004 - run #0
== Testing sysctl behavior against /proc/sys/debug/test_sysctl/uint_0001 ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Checking ignoring spaces up to PAGE_SIZE works on write ...ok
Checking passing PAGE_SIZE of spaces fails on write ...ok
Testing UINT_MAX works ...ok
Testing UINT_MAX + 1 will fail as expected...ok
Testing negative values will not work as expected ...ok
Sun Nov 25 06:55:55 UTC 2018
Running test: sysctl_test_0005 - run #0
Testing array works as expected ... ok
Testing skipping trailing array elements works ... ok
Testing PAGE_SIZE limit on array works ... ok
Testing exceeding PAGE_SIZE limit fails as expected ... Files - and /proc/sys/debug/test_sysctl/int_0003 differ
ok
Sun Nov 25 06:55:56 UTC 2018
Running test: sysctl_test_0005 - run #1
Testing array works as expected ... ok
Testing skipping trailing array elements works ... ok
Testing PAGE_SIZE limit on array works ... ok
Testing exceeding PAGE_SIZE limit fails as expected ... Files - and /proc/sys/debug/test_sysctl/int_0003 differ
ok
Sun Nov 25 06:55:56 UTC 2018
Running test: sysctl_test_0005 - run #2
Testing array works as expected ... ok
Testing skipping trailing array elements works ... ok
Testing PAGE_SIZE limit on array works ... ok
Testing exceeding PAGE_SIZE limit fails as expected ... Files - and /proc/sys/debug/test_sysctl/int_0003 differ
ok
ok 1..1 selftests: sysctl: sysctl.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-3327a9c46352f111697d93d6134e7bf37c6bffca/tools/testing/selftests/sysctl'
To reproduce:
git clone https://github.com/intel/lkp-tests.git
cd lkp-tests
bin/lkp qemu -k <bzImage> job-script # job-script is attached in this email
Thanks,
Rong Chen
View attachment "config-4.20.0-rc1-00121-g3327a9c" of type "text/plain" (168463 bytes)
View attachment "job-script" of type "text/plain" (6100 bytes)
Download attachment "dmesg.xz" of type "application/x-xz" (54912 bytes)
View attachment "kernel_selftests" of type "text/plain" (123315 bytes)
Powered by blists - more mailing lists