| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1543310856.15593.32.camel@mhfsdcap03>
Date: Tue, 27 Nov 2018 17:27:36 +0800
From: Jjian Zhou <jjian.zhou@...iatek.com>
To: Nicolas Boichat <drinkcat@...omium.org>
CC: Ulf Hansson <ulf.hansson@...aro.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Chaotian Jing (井朝天)
<Chaotian.Jing@...iatek.com>,
Ryder Lee (李庚諺)
<Ryder.Lee@...iatek.com>,
"sean.wang@...iatek.com" <sean.wang@...iatek.com>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
linux-arm Mailing List <linux-arm-kernel@...ts.infradead.org>,
"linux-mediatek@...ts.infradead.org"
<linux-mediatek@...ts.infradead.org>,
srv_heupstream <srv_heupstream@...iatek.com>,
lkml <linux-kernel@...r.kernel.org>,
Yong Mao (毛勇)
<yong.mao@...iatek.com>, Hsin-Yi Wang <hsinyi@...omium.org>
Subject: Re: [PATCH v2] mmc: mediatek: add MT8183 SDIO driver support
On Mon, 2018-11-26 at 19:47 +0800, Nicolas Boichat wrote:
> On Thu, Nov 22, 2018 at 4:03 PM Jjian Zhou <jjian.zhou@...iatek.com> wrote:
> >
> > MT8183 need SDIO driver. So it need add new code
> > to support it.
>
> The description does not seem to match what is going on below: I don't
> see anything that is obviously MT8183-specific. At first glance, this
> seems like a patch that makes it possible to enable MMC_CAP_SDIO_IRQ
> ("cap-sdio-irq" dt property).
>
> Can you describe in more detail what is going on here?
Hi Nicolas,
Thank you for your comments.
Host wants to use the new method to signal/process SDIO IRQs, must
enable MMC_CAPS_SDIO_IRQ_NOTHREAD and implement the ->ack_sdio_irq()
callback. The current driver doesn't support it. This code makes it
possible to enable SDIO IRQs by using the new method. It is described as
"MT8183 need SDIO driver". Because it is tested based on MT8183.
How about the below commit message:
This code wants to support SDIO IRQs. It enables MMC_CAP_SDIO_IRQ &
MMC_CAP2_SDIO_IRQ_NOTHREAD and implement the ->ack_sdio_irq() callback.
Thanks a lot.
>
> > Signed-off-by: Jjian Zhou <jjian.zhou@...iatek.com>
> > Signed-off-by: Yong mao <yong.mao@...iatek.com>
> > Signed-off-by: Chaotian Jing <chaotian.jing@...iatek.com>
> > ---
> > drivers/mmc/host/mtk-sd.c | 51 ++++++++++++++++++++++++++++++++++++++++++++---
> > 1 file changed, 48 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> > index 6334cc7..da2a047 100644
> > --- a/drivers/mmc/host/mtk-sd.c
> > +++ b/drivers/mmc/host/mtk-sd.c
> > @@ -1114,6 +1114,7 @@ static void msdc_start_command(struct msdc_host *host,
> > struct mmc_request *mrq, struct mmc_command *cmd)
> > {
> > u32 rawcmd;
> > + unsigned long flags;
> >
> > WARN_ON(host->cmd);
> > host->cmd = cmd;
> > @@ -1131,7 +1132,12 @@ static void msdc_start_command(struct msdc_host *host,
> > cmd->error = 0;
> > rawcmd = msdc_cmd_prepare_raw_cmd(host, mrq, cmd);
> >
> > + if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
> > + spin_lock_irqsave(&host->lock, flags);
> > sdr_set_bits(host->base + MSDC_INTEN, cmd_ints_mask);
> > + if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +
> > writel(cmd->arg, host->base + SDC_ARG);
> > writel(rawcmd, host->base + SDC_CMD);
> > }
> > @@ -1351,6 +1357,27 @@ static void msdc_request_timeout(struct work_struct *work)
> > }
> > }
> >
> > +static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
> > +{
> > + unsigned long flags;
> > + struct msdc_host *host = mmc_priv(mmc);
> > +
> > + if (enb)
> > + pm_runtime_get_sync(host->dev);
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > + if (enb)
> > + sdr_set_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
> > + else
> > + sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +
> > + if (!enb) {
> > + pm_runtime_mark_last_busy(host->dev);
> > + pm_runtime_put_autosuspend(host->dev);
> > + }
> > +}
> > +
> > static irqreturn_t msdc_irq(int irq, void *dev_id)
> > {
> > struct msdc_host *host = (struct msdc_host *) dev_id;
> > @@ -1373,7 +1400,12 @@ static irqreturn_t msdc_irq(int irq, void *dev_id)
> > data = host->data;
> > spin_unlock_irqrestore(&host->lock, flags);
> >
> > - if (!(events & event_mask))
> > + if ((events & event_mask) & MSDC_INT_SDIOIRQ) {
> > + msdc_enable_sdio_irq(host->mmc, 0);
> > + sdio_signal_irq(host->mmc);
> > + }
> > +
> > + if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
> > break;
> >
> > if (!mrq) {
> > @@ -1493,8 +1525,11 @@ static void msdc_init_hw(struct msdc_host *host)
> > */
> > sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIO);
> >
> > - /* disable detect SDIO device interrupt function */
> > - sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
> > + /* Config SDIO device detect interrupt function */
> > + if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
> > + sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
> > + else
> > + sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
> >
> > /* Configure to default data timeout */
> > sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
> > @@ -2013,6 +2048,11 @@ static void msdc_hw_reset(struct mmc_host *mmc)
> > sdr_clr_bits(host->base + EMMC_IOCON, 1);
> > }
> >
> > +static void msdc_ack_sdio_irq(struct mmc_host *mmc)
> > +{
> > + msdc_enable_sdio_irq(mmc, 1);
> > +}
> > +
> > static const struct mmc_host_ops mt_msdc_ops = {
> > .post_req = msdc_post_req,
> > .pre_req = msdc_pre_req,
> > @@ -2020,6 +2060,8 @@ static void msdc_hw_reset(struct mmc_host *mmc)
> > .set_ios = msdc_ops_set_ios,
> > .get_ro = mmc_gpio_get_ro,
> > .get_cd = mmc_gpio_get_cd,
> > + .enable_sdio_irq = msdc_enable_sdio_irq,
> > + .ack_sdio_irq = msdc_ack_sdio_irq,
> > .start_signal_voltage_switch = msdc_ops_switch_volt,
> > .card_busy = msdc_card_busy,
> > .execute_tuning = msdc_execute_tuning,
> > @@ -2147,6 +2189,9 @@ static int msdc_drv_probe(struct platform_device *pdev)
> > else
> > mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 4095);
> >
> > + if (mmc->caps & MMC_CAP_SDIO_IRQ)
> > + mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
> > +
> > mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
> > /* MMC core transfer sizes tunable parameters */
> > mmc->max_segs = MAX_BD_NUM;
> > --
> > 1.9.1
> >
Powered by blists - more mailing lists