| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20181127021748.GB6163@shao2-debian>
Date: Tue, 27 Nov 2018 10:17:48 +0800
From: kernel test robot <rong.a.chen@...el.com>
To: Paolo Abeni <pabeni@...hat.com>
Cc: "David S. Miller" <davem@...emloft.net>,
LKML <linux-kernel@...r.kernel.org>,
Stephen Rothwell <sfr@...b.auug.org.au>, lkp@...org
Subject: [LKP] [selftests] e87f53b4fa:
kernel_selftests.net.udpgro_bench.sh.fail
FYI, we noticed the following commit (built with gcc-7):
commit: e87f53b4fab72f95952c17f672088e082e8e79ab ("selftests: add some benchmark for UDP GRO")
https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git master
in testcase: kernel_selftests
with following parameters:
group: kselftests-02
test-description: The kernel contains a set of "self tests" under the tools/testing/selftests/ directory. These are intended to be small unit tests to exercise individual code paths in the kernel.
test-url: https://www.kernel.org/doc/Documentation/kselftest.txt
on test machine: qemu-system-x86_64 -enable-kvm -cpu host -smp 2 -m 4G
caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
KERNEL SELFTESTS: linux_headers_dir is /usr/src/linux-headers-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab
2018-11-25 00:32:53 ln -sf /usr/bin/clang-7 /usr/bin/clang
2018-11-25 00:32:54 ln -sf /usr/bin/llc-7 /usr/bin/llc
media_tests test: not in Makefile
2018-11-25 00:32:54 make TARGETS=media_tests
make[1]: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/media_tests'
gcc -I../ -I../../../../usr/include/ media_device_test.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/media_tests/media_device_test
gcc -I../ -I../../../../usr/include/ media_device_open.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/media_tests/media_device_open
gcc -I../ -I../../../../usr/include/ video_device_test.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/media_tests/video_device_test
make[1]: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/media_tests'
ignored_by_lkp media_tests test
2018-11-25 00:33:01 make run_tests -C membarrier
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/membarrier'
gcc -g -I../../../../usr/include/ membarrier_test.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/membarrier/membarrier_test
TAP version 13
selftests: membarrier: membarrier_test
========================================
ok 1 sys_membarrier available
ok 2 sys membarrier invalid command test: command = -1, flags = 0, errno = 22. Failed as expected
ok 3 sys membarrier MEMBARRIER_CMD_QUERY invalid flags test: flags = 1, errno = 22. Failed as expected
ok 4 sys membarrier MEMBARRIER_CMD_GLOBAL test: flags = 0
ok 5 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED not registered failure test: flags = 0, errno = 1
ok 6 sys membarrier MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED test: flags = 0
ok 7 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED test: flags = 0
ok 8 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE not registered failure test: flags = 0, errno = 1
ok 9 sys membarrier MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_SYNC_CORE test: flags = 0
ok 10 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE test: flags = 0
ok 11 sys membarrier MEMBARRIER_CMD_GLOBAL_EXPEDITED test: flags = 0
ok 12 sys membarrier MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED test: flags = 0
ok 13 sys membarrier MEMBARRIER_CMD_GLOBAL_EXPEDITED test: flags = 0
Pass 13 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
1..13
ok 1..1 selftests: membarrier: membarrier_test [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/membarrier'
2018-11-25 00:33:03 make run_tests -C memfd
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/memfd'
gcc -D_FILE_OFFSET_BITS=64 -I../../../../include/uapi/ -I../../../../include/ -I../../../../usr/include/ -c -o common.o common.c
gcc -D_FILE_OFFSET_BITS=64 -I../../../../include/uapi/ -I../../../../include/ -I../../../../usr/include/ memfd_test.c common.o -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/memfd/memfd_test
In file included from ../../../../include/uapi/linux/stddef.h:2:0,
from ../../../../include/uapi/linux/posix_types.h:5,
from ../../../../include/uapi/linux/types.h:14,
from ../../../../include/uapi/asm-generic/fcntl.h:5,
from ../../../../usr/include/asm/fcntl.h:1,
from ../../../../include/uapi/linux/fcntl.h:5,
from memfd_test.c:9:
../../../../include/linux/compiler_types.h:198:58: error: unknown type name ‘__gnu_inline’
#define inline inline __attribute__((__always_inline__)) __gnu_inline \
^
../../../../include/linux/compiler_types.h:199:2: warning: variable ‘__maybe_unused’ declared ‘inline’
__maybe_unused notrace
^
../../../../include/linux/compiler_types.h:199:2: error: ‘__no_instrument_function__’ attribute applies only to functions
In file included from /usr/include/endian.h:60:0,
from /usr/include/x86_64-linux-gnu/sys/types.h:194,
from /usr/include/stdlib.h:394,
from memfd_test.c:13:
/usr/include/x86_64-linux-gnu/bits/byteswap.h:44:17: error: expected ‘,’ or ‘;’ before ‘unsigned’
static __inline unsigned int
^~~~~~~~
In file included from ../../../../include/uapi/linux/stddef.h:2:0,
from ../../../../include/uapi/linux/posix_types.h:5,
from ../../../../include/uapi/linux/types.h:14,
from ../../../../include/uapi/asm-generic/fcntl.h:5,
from ../../../../usr/include/asm/fcntl.h:1,
from ../../../../include/uapi/linux/fcntl.h:5,
from memfd_test.c:9:
../../../../include/linux/compiler_types.h:198:58: error: unknown type name ‘__gnu_inline’
#define inline inline __attribute__((__always_inline__)) __gnu_inline \
^
../../../../include/linux/compiler_types.h:199:2: warning: variable ‘__maybe_unused’ declared ‘inline’
__maybe_unused notrace
^
../../../../include/linux/compiler_types.h:199:2: error: ‘__no_instrument_function__’ attribute applies only to functions
In file included from /usr/include/endian.h:60:0,
from /usr/include/x86_64-linux-gnu/sys/types.h:194,
from /usr/include/stdlib.h:394,
from memfd_test.c:13:
/usr/include/x86_64-linux-gnu/bits/byteswap.h:108:17: error: expected ‘,’ or ‘;’ before ‘__uint64_t’
static __inline __uint64_t
^~~~~~~~~~
In file included from ../../../../include/uapi/linux/stddef.h:2:0,
from ../../../../include/uapi/linux/posix_types.h:5,
from ../../../../include/uapi/linux/types.h:14,
from ../../../../include/uapi/asm-generic/fcntl.h:5,
from ../../../../usr/include/asm/fcntl.h:1,
from ../../../../include/uapi/linux/fcntl.h:5,
from memfd_test.c:9:
../../../../include/linux/compiler_types.h:198:58: error: unknown type name ‘__gnu_inline’
#define inline inline __attribute__((__always_inline__)) __gnu_inline \
^
../../../../include/linux/compiler_types.h:199:2: warning: variable ‘__maybe_unused’ declared ‘inline’
__maybe_unused notrace
^
../../../../include/linux/compiler_types.h:199:2: error: ‘__no_instrument_function__’ attribute applies only to functions
In file included from /usr/include/endian.h:61:0,
from /usr/include/x86_64-linux-gnu/sys/types.h:194,
from /usr/include/stdlib.h:394,
from memfd_test.c:13:
/usr/include/x86_64-linux-gnu/bits/uintn-identity.h:32:17: error: expected ‘,’ or ‘;’ before ‘__uint16_t’
static __inline __uint16_t
^~~~~~~~~~
In file included from ../../../../include/uapi/linux/stddef.h:2:0,
from ../../../../include/uapi/linux/posix_types.h:5,
from ../../../../include/uapi/linux/types.h:14,
from ../../../../include/uapi/asm-generic/fcntl.h:5,
from ../../../../usr/include/asm/fcntl.h:1,
from ../../../../include/uapi/linux/fcntl.h:5,
from memfd_test.c:9:
../../../../include/linux/compiler_types.h:198:58: error: unknown type name ‘__gnu_inline’
#define inline inline __attribute__((__always_inline__)) __gnu_inline \
^
../../../../include/linux/compiler_types.h:199:2: warning: variable ‘__maybe_unused’ declared ‘inline’
__maybe_unused notrace
^
../../../../include/linux/compiler_types.h:199:2: error: ‘__no_instrument_function__’ attribute applies only to functions
In file included from /usr/include/endian.h:61:0,
from /usr/include/x86_64-linux-gnu/sys/types.h:194,
from /usr/include/stdlib.h:394,
from memfd_test.c:13:
/usr/include/x86_64-linux-gnu/bits/uintn-identity.h:38:17: error: expected ‘,’ or ‘;’ before ‘__uint32_t’
static __inline __uint32_t
^~~~~~~~~~
In file included from ../../../../include/uapi/linux/stddef.h:2:0,
from ../../../../include/uapi/linux/posix_types.h:5,
from ../../../../include/uapi/linux/types.h:14,
from ../../../../include/uapi/asm-generic/fcntl.h:5,
from ../../../../usr/include/asm/fcntl.h:1,
from ../../../../include/uapi/linux/fcntl.h:5,
from memfd_test.c:9:
../../../../include/linux/compiler_types.h:198:58: error: unknown type name ‘__gnu_inline’
#define inline inline __attribute__((__always_inline__)) __gnu_inline \
^
../../../../include/linux/compiler_types.h:199:2: warning: variable ‘__maybe_unused’ declared ‘inline’
__maybe_unused notrace
^
../../../../include/linux/compiler_types.h:199:2: error: ‘__no_instrument_function__’ attribute applies only to functions
In file included from /usr/include/endian.h:61:0,
from /usr/include/x86_64-linux-gnu/sys/types.h:194,
from /usr/include/stdlib.h:394,
from memfd_test.c:13:
/usr/include/x86_64-linux-gnu/bits/uintn-identity.h:44:17: error: expected ‘,’ or ‘;’ before ‘__uint64_t’
static __inline __uint64_t
^~~~~~~~~~
memfd_test.c: In function ‘mfd_assert_get_seals’:
memfd_test.c:74:6: warning: implicit declaration of function ‘fcntl’ [-Wimplicit-function-declaration]
r = fcntl(fd, F_GET_SEALS);
^~~~~
memfd_test.c: In function ‘mfd_assert_open’:
memfd_test.c:197:6: warning: implicit declaration of function ‘open’ [-Wimplicit-function-declaration]
r = open(buf, flags, mode);
^~~~
memfd_test.c: In function ‘mfd_assert_write’:
memfd_test.c:328:6: warning: implicit declaration of function ‘fallocate’ [-Wimplicit-function-declaration]
r = fallocate(fd,
^~~~~~~~~
../lib.mk:152: recipe for target '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/memfd/memfd_test' failed
make: *** [/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/memfd/memfd_test] Error 1
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/memfd'
2018-11-25 00:33:05 make run_tests -C memory-hotplug
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/memory-hotplug'
TAP version 13
selftests: memory-hotplug: mem-on-off-test.sh
========================================
Test scope: 2% hotplug memory
online all hot-pluggable memory in offline state:
SKIPPED - no hot-pluggable memory in offline state
offline 2% hot-pluggable memory in online state
trying to offline 1 out of 44 memory block(s):
online->offline memory1
online all hot-pluggable memory in offline state:
offline->online memory1
Test with memory notifier error injection
ok 1..1 selftests: memory-hotplug: mem-on-off-test.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/memory-hotplug'
2018-11-25 00:33:32 make run_tests -C mount
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/mount'
gcc -Wall -O2 unprivileged-remount-test.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/mount/unprivileged-remount-test
TAP version 13
selftests: mount: run_tests.sh
========================================
ok 1..1 selftests: mount: run_tests.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/mount'
2018-11-25 00:33:35 make run_tests -C mqueue
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/mqueue'
gcc -O2 mq_open_tests.c -lrt -lpthread -lpopt -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/mqueue/mq_open_tests
gcc -O2 mq_perf_tests.c -lrt -lpthread -lpopt -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/mqueue/mq_perf_tests
TAP version 13
selftests: mqueue: mq_open_tests
========================================
Using Default queue path - /test1
Initial system state:
Using queue path: /test1
RLIMIT_MSGQUEUE(soft): 819200
RLIMIT_MSGQUEUE(hard): 819200
Maximum Message Size: 8192
Maximum Queue Size: 10
Default Message Size: 8192
Default Queue Size: 10
Adjusted system state for testing:
RLIMIT_MSGQUEUE(soft): 819200
RLIMIT_MSGQUEUE(hard): 819200
Maximum Message Size: 8192
Maximum Queue Size: 10
Default Message Size: 8192
Default Queue Size: 10
Test series 1, behavior when no attr struct passed to mq_open:
Kernel supports setting defaults separately from maximums: PASS
Given sane values, mq_open without an attr struct succeeds: PASS
Kernel properly honors default setting knobs: PASS
Kernel properly limits default values to lesser of default/max: PASS
Kernel properly fails to create queue when defaults would
exceed rlimit: PASS
Test series 2, behavior when attr struct is passed to mq_open:
Queue open in excess of rlimit max when euid = 0 failed: PASS
Queue open with mq_maxmsg > limit when euid = 0 succeeded: PASS
Queue open with mq_msgsize > limit when euid = 0 succeeded: PASS
Queue open with total size > 2GB when euid = 0 failed: PASS
Queue open in excess of rlimit max when euid = 99 failed: PASS
Queue open with mq_maxmsg > limit when euid = 99 failed: PASS
Queue open with mq_msgsize > limit when euid = 99 failed: PASS
Queue open with total size > 2GB when euid = 99 failed: PASS
ok 1..1 selftests: mqueue: mq_open_tests [PASS]
selftests: mqueue: mq_perf_tests
========================================
Initial system state:
Using queue path: /mq_perf_tests
RLIMIT_MSGQUEUE(soft): 819200
RLIMIT_MSGQUEUE(hard): 819200
Maximum Message Size: 8192
Maximum Queue Size: 10
Nice value: 0
Adjusted system state for testing:
RLIMIT_MSGQUEUE(soft): (unlimited)
RLIMIT_MSGQUEUE(hard): (unlimited)
Maximum Message Size: 16777216
Maximum Queue Size: 65530
Nice value: -20
Continuous mode: (disabled)
CPUs to pin: 1
Queue /mq_perf_tests created:
mq_flags: O_NONBLOCK
mq_maxmsg: 65530
mq_msgsize: 16
mq_curmsgs: 0
Started mqueue performance test thread on CPU 1
Max priorities: 32768
Clock resolution: 1 nsec
Test #1: Time send/recv message, queue empty
(10000000 iterations)
Send msg: 26.900700126s total time
2690 nsec/msg
Recv msg: 27.389113676s total time
2738 nsec/msg
Test #2a: Time send/recv message, queue full, constant prio
:
(100000 iterations)
Filling queue...done. 0.163752591s
Testing...done.
Send msg: 0.324560919s total time
3245 nsec/msg
Recv msg: 0.441773092s total time
4417 nsec/msg
Draining queue...done. 0.193613850s
Test #2b: Time send/recv message, queue full, increasing prio
:
(100000 iterations)
Filling queue...done. 0.489500375s
Testing...done.
Send msg: 0.796604313s total time
7966 nsec/msg
Recv msg: 0.716132968s total time
7161 nsec/msg
Draining queue...done. 0.405590558s
Test #2c: Time send/recv message, queue full, decreasing prio
:
(100000 iterations)
Filling queue...done. 0.527902430s
Testing...done.
Send msg: 0.859499119s total time
8594 nsec/msg
Recv msg: 0.695698293s total time
6956 nsec/msg
Draining queue...done. 0.393798988s
Test #2d: Time send/recv message, queue full, random prio
:
(100000 iterations)
Filling queue...done. 0.582184154s
Testing...done.
Send msg: 1.123424798s total time
11234 nsec/msg
Recv msg: 0.814363994s total time
8143 nsec/msg
Draining queue...done. 0.544113300s
ok 1..2 selftests: mqueue: mq_perf_tests [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/mqueue'
2018-11-25 00:35:01 make run_tests -C net
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net'
make ARCH=x86 -C ../../../.. headers_install
make[1]: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab'
UPD include/generated/uapi/linux/version.h
HOSTCC scripts/basic/fixdep
WRAP arch/x86/include/generated/uapi/asm/bpf_perf_event.h
WRAP arch/x86/include/generated/uapi/asm/poll.h
SYSTBL arch/x86/include/generated/asm/syscalls_32.h
SYSHDR arch/x86/include/generated/uapi/asm/unistd_32.h
SYSHDR arch/x86/include/generated/uapi/asm/unistd_64.h
SYSHDR arch/x86/include/generated/uapi/asm/unistd_x32.h
HOSTCC arch/x86/tools/relocs_32.o
HOSTCC arch/x86/tools/relocs_64.o
HOSTCC arch/x86/tools/relocs_common.o
HOSTLD arch/x86/tools/relocs
HOSTCC scripts/unifdef
INSTALL usr/include/asm-generic/ (37 files)
INSTALL usr/include/drm/ (26 files)
INSTALL usr/include/linux/ (501 files)
INSTALL usr/include/linux/android/ (1 file)
INSTALL usr/include/linux/byteorder/ (2 files)
INSTALL usr/include/linux/caif/ (2 files)
INSTALL usr/include/linux/can/ (6 files)
INSTALL usr/include/linux/cifs/ (1 file)
INSTALL usr/include/linux/dvb/ (8 files)
INSTALL usr/include/linux/genwqe/ (1 file)
INSTALL usr/include/linux/hdlc/ (1 file)
INSTALL usr/include/linux/hsi/ (2 files)
INSTALL usr/include/linux/iio/ (2 files)
INSTALL usr/include/linux/isdn/ (1 file)
INSTALL usr/include/linux/mmc/ (1 file)
INSTALL usr/include/linux/netfilter/ (88 files)
INSTALL usr/include/linux/netfilter/ipset/ (4 files)
INSTALL usr/include/linux/netfilter_arp/ (2 files)
INSTALL usr/include/linux/netfilter_bridge/ (17 files)
INSTALL usr/include/linux/netfilter_ipv4/ (9 files)
INSTALL usr/include/linux/netfilter_ipv6/ (13 files)
INSTALL usr/include/linux/nfsd/ (5 files)
INSTALL usr/include/linux/raid/ (2 files)
INSTALL usr/include/linux/sched/ (1 file)
INSTALL usr/include/linux/spi/ (1 file)
INSTALL usr/include/linux/sunrpc/ (1 file)
INSTALL usr/include/linux/tc_act/ (15 files)
INSTALL usr/include/linux/tc_ematch/ (5 files)
INSTALL usr/include/linux/usb/ (13 files)
INSTALL usr/include/linux/wimax/ (1 file)
INSTALL usr/include/misc/ (2 files)
INSTALL usr/include/mtd/ (5 files)
INSTALL usr/include/rdma/ (25 files)
INSTALL usr/include/rdma/hfi/ (2 files)
INSTALL usr/include/scsi/ (5 files)
INSTALL usr/include/scsi/fc/ (4 files)
INSTALL usr/include/sound/ (16 files)
INSTALL usr/include/video/ (3 files)
INSTALL usr/include/xen/ (4 files)
INSTALL usr/include/asm/ (62 files)
make[1]: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab'
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ reuseport_bpf.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net/reuseport_bpf
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ reuseport_bpf_cpu.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net/reuseport_bpf_cpu
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -lnuma reuseport_bpf_numa.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net/reuseport_bpf_numa
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ reuseport_dualstack.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net/reuseport_dualstack
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ reuseaddr_conflict.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net/reuseaddr_conflict
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ tls.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net/tls
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ socket.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net/socket
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ psock_fanout.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net/psock_fanout
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ psock_tpacket.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net/psock_tpacket
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ msg_zerocopy.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net/msg_zerocopy
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -lpthread tcp_mmap.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net/tcp_mmap
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -lpthread tcp_inq.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net/tcp_inq
tcp_inq.c: In function ‘main’:
tcp_inq.c:178:4: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
inq = *((int *) CMSG_DATA(cm));
^~~
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ psock_snd.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net/psock_snd
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ udpgso.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net/udpgso
udpgso.c: In function ‘send_one’:
udpgso.c:484:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
*((uint16_t *) CMSG_DATA(cm)) = gso_len;
^
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ udpgso_bench_tx.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net/udpgso_bench_tx
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ udpgso_bench_rx.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net/udpgso_bench_rx
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ ip_defrag.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net/ip_defrag
TAP version 13
selftests: net: reuseport_bpf
========================================
---- IPv4 UDP ----
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing EBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
Testing too many filters...
Testing filters on non-SO_REUSEPORT socket...
---- IPv6 UDP ----
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing EBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
Testing too many filters...
Testing filters on non-SO_REUSEPORT socket...
---- IPv6 UDP w/ mapped IPv4 ----
Testing EBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
---- IPv4 TCP ----
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing too many filters...
Testing filters on non-SO_REUSEPORT socket...
---- IPv6 TCP ----
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing too many filters...
Testing filters on non-SO_REUSEPORT socket...
---- IPv6 TCP w/ mapped IPv4 ----
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing filter add without bind...
SUCCESS
ok 1..1 selftests: net: reuseport_bpf [PASS]
selftests: net: reuseport_bpf_cpu
========================================
---- IPv4 UDP ----
send cpu 0, receive socket 0
send cpu 1, receive socket 1
send cpu 1, receive socket 1
send cpu 0, receive socket 0
send cpu 0, receive socket 0
send cpu 1, receive socket 1
---- IPv6 UDP ----
send cpu 0, receive socket 0
send cpu 1, receive socket 1
send cpu 1, receive socket 1
send cpu 0, receive socket 0
send cpu 0, receive socket 0
send cpu 1, receive socket 1
---- IPv4 TCP ----
send cpu 0, receive socket 0
send cpu 1, receive socket 1
send cpu 1, receive socket 1
send cpu 0, receive socket 0
send cpu 0, receive socket 0
send cpu 1, receive socket 1
---- IPv6 TCP ----
send cpu 0, receive socket 0
send cpu 1, receive socket 1
send cpu 1, receive socket 1
send cpu 0, receive socket 0
send cpu 0, receive socket 0
send cpu 1, receive socket 1
SUCCESS
ok 1..2 selftests: net: reuseport_bpf_cpu [PASS]
selftests: net: reuseport_bpf_numa
========================================
---- IPv4 UDP ----
send node 0, receive socket 0
send node 0, receive socket 0
---- IPv6 UDP ----
send node 0, receive socket 0
send node 0, receive socket 0
---- IPv4 TCP ----
send node 0, receive socket 0
send node 0, receive socket 0
---- IPv6 TCP ----
send node 0, receive socket 0
send node 0, receive socket 0
SUCCESS
ok 1..3 selftests: net: reuseport_bpf_numa [PASS]
selftests: net: reuseport_dualstack
========================================
---- UDP IPv4 created before IPv6 ----
---- UDP IPv6 created before IPv4 ----
---- UDP IPv4 created before IPv6 (large) ----
---- UDP IPv6 created before IPv4 (large) ----
---- TCP IPv4 created before IPv6 ----
---- TCP IPv6 created before IPv4 ----
SUCCESS
ok 1..4 selftests: net: reuseport_dualstack [PASS]
selftests: net: reuseaddr_conflict
========================================
Opening 127.0.0.1:9999
Opening INADDR_ANY:9999
bind: Address already in use
Opening in6addr_any:9999
Opening INADDR_ANY:9999
bind: Address already in use
Opening INADDR_ANY:9999 after closing ipv6 socket
bind: Address already in use
Successok 1..5 selftests: net: reuseaddr_conflict [PASS]
selftests: net: tls
========================================
[==========] Running 29 tests from 2 test cases.
[ RUN ] tls.sendfile
[ OK ] tls.sendfile
[ RUN ] tls.send_then_sendfile
[ OK ] tls.send_then_sendfile
[ RUN ] tls.recv_max
[ OK ] tls.recv_max
[ RUN ] tls.recv_small
[ OK ] tls.recv_small
[ RUN ] tls.msg_more
[ OK ] tls.msg_more
[ RUN ] tls.sendmsg_single
[ OK ] tls.sendmsg_single
[ RUN ] tls.sendmsg_large
[ OK ] tls.sendmsg_large
[ RUN ] tls.sendmsg_multiple
[ OK ] tls.sendmsg_multiple
[ RUN ] tls.sendmsg_multiple_stress
[ OK ] tls.sendmsg_multiple_stress
[ RUN ] tls.splice_from_pipe
[ OK ] tls.splice_from_pipe
[ RUN ] tls.splice_from_pipe2
[ OK ] tls.splice_from_pipe2
[ RUN ] tls.send_and_splice
[ OK ] tls.send_and_splice
[ RUN ] tls.splice_to_pipe
[ OK ] tls.splice_to_pipe
[ RUN ] tls.recvmsg_single
[ OK ] tls.recvmsg_single
[ RUN ] tls.recvmsg_single_max
[ OK ] tls.recvmsg_single_max
[ RUN ] tls.recvmsg_multiple
[ OK ] tls.recvmsg_multiple
[ RUN ] tls.single_send_multiple_recv
[ OK ] tls.single_send_multiple_recv
[ RUN ] tls.multiple_send_single_recv
[ OK ] tls.multiple_send_single_recv
[ RUN ] tls.recv_partial
[ OK ] tls.recv_partial
[ RUN ] tls.recv_nonblock
[ OK ] tls.recv_nonblock
[ RUN ] tls.recv_peek
[ OK ] tls.recv_peek
[ RUN ] tls.recv_peek_multiple
[ OK ] tls.recv_peek_multiple
[ RUN ] tls.recv_peek_multiple_records
[ OK ] tls.recv_peek_multiple_records
[ RUN ] tls.recv_peek_large_buf_mult_recs
[ OK ] tls.recv_peek_large_buf_mult_recs
[ RUN ] tls.pollin
[ OK ] tls.pollin
[ RUN ] tls.poll_wait
[ OK ] tls.poll_wait
[ RUN ] tls.blocking
[ OK ] tls.blocking
[ RUN ] tls.nonblocking
[ OK ] tls.nonblocking
[ RUN ] tls.control_msg
[ OK ] tls.control_msg
[==========] 29 / 29 tests passed.
[ PASSED ]
ok 1..6 selftests: net: tls [PASS]
selftests: net: run_netsocktests
========================================
--------------------
running socket test
--------------------
[PASS]
ok 1..7 selftests: net: run_netsocktests [PASS]
selftests: net: run_afpackettests
========================================
--------------------
running psock_fanout test
--------------------
test: control single socket
test: control multiple sockets
test: unique ids
test: datapath 0x0 ports 8000,8002
info: count=0,0, expect=0,0
info: count=5,15, expect=15,5
info: count=5,20, expect=20,5
test: datapath 0x1000 ports 8000,8002
info: count=0,0, expect=0,0
info: count=5,15, expect=15,5
info: count=15,20, expect=20,15
test: datapath 0x1 ports 8000,8002
info: count=0,0, expect=0,0
info: count=10,10, expect=10,10
info: count=17,18, expect=18,17
test: datapath 0x3 ports 8000,8002
info: count=0,0, expect=0,0
info: count=15,5, expect=15,5
info: count=20,15, expect=20,15
test: datapath 0x6 ports 8000,8002
info: count=0,0, expect=0,0
info: count=5,15, expect=15,5
info: count=20,15, expect=15,20
test: datapath 0x7 ports 8000,8002
info: count=0,0, expect=0,0
info: count=5,15, expect=15,5
info: count=20,15, expect=15,20
test: datapath 0x2 ports 8000,8002
info: count=0,0, expect=0,0
info: count=20,0, expect=20,0
info: count=20,0, expect=20,0
test: datapath 0x2 ports 8000,8002
info: count=0,0, expect=0,0
info: count=0,20, expect=0,20
info: count=0,20, expect=0,20
test: datapath 0x2000 ports 8000,8002
info: count=0,0, expect=0,0
info: count=20,20, expect=20,20
info: count=20,20, expect=20,20
OK. All tests passed
[PASS]
--------------------
running psock_tpacket test
--------------------
test: TPACKET_V1 with PACKET_RX_RING .................... 100 pkts (14200 bytes)
test: TPACKET_V1 with PACKET_TX_RING .................... 100 pkts (14200 bytes)
test: TPACKET_V2 with PACKET_RX_RING .................... 100 pkts (14200 bytes)
test: TPACKET_V2 with PACKET_TX_RING .................... 100 pkts (14200 bytes)
test: TPACKET_V3 with PACKET_RX_RING .................... 100 pkts (14200 bytes)
test: TPACKET_V3 with PACKET_TX_RING .................... 100 pkts (14200 bytes)
OK. All tests passed
[PASS]
ok 1..8 selftests: net: run_afpackettests [PASS]
selftests: net: test_bpf.sh
========================================
test_bpf: ok
ok 1..9 selftests: net: test_bpf.sh [PASS]
selftests: net: netdevice.sh
========================================
SKIP: eth0: interface already up
Cannot get device udp-fragmentation-offload settings: Operation not supported
PASS: eth0: ethtool list features
PASS: eth0: ethtool dump
PASS: eth0: ethtool stats
SKIP: eth0: interface kept up
ok 1..10 selftests: net: netdevice.sh [PASS]
selftests: net: rtnetlink.sh
========================================
PASS: policy routing
PASS: route get
PASS: tc htb hierarchy
PASS: gre tunnel endpoint
PASS: gretap
RTNETLINK answers: Operation not supported
Cannot find device "ip6gretap00"
Cannot find device "ip6gretap00"
Cannot find device "ip6gretap00"
RTNETLINK answers: Operation not supported
Cannot find device "ip6gretap00"
FAIL: ip6gretap
PASS: erspan
RTNETLINK answers: Operation not supported
Cannot find device "ip6erspan00"
Cannot find device "ip6erspan00"
Cannot find device "ip6erspan00"
RTNETLINK answers: Operation not supported
Cannot find device "ip6erspan00"
Cannot find device "ip6erspan00"
Cannot find device "ip6erspan00"
RTNETLINK answers: Operation not supported
Cannot find device "ip6erspan00"
FAIL: ip6erspan
PASS: bridge setup
PASS: ipv6 addrlabel
PASS: set ifalias a79eaa47-fccf-4f03-ba65-c1ac859beec4 for test-dummy0
PASS: vrf
PASS: vxlan
PASS: fou
PASS: macsec
PASS: ipsec
FAIL: ipsec_offload netdevsim doesn't support IPsec offload
ok 1..11 selftests: net: rtnetlink.sh [PASS]
selftests: net: fib_tests.sh
========================================
Single path route test
Start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
Nexthop device deleted
TEST: IPv4 fibmatch - no route [ OK ]
TEST: IPv6 fibmatch - no route [ OK ]
Multipath route test
Start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
One nexthop device deleted
TEST: IPv4 - multipath route removed on delete [ OK ]
TEST: IPv6 - multipath down to single path [ OK ]
Second nexthop device deleted
TEST: IPv6 - no route [ OK ]
Single path, admin down
Start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
Route deleted on down
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
Admin down multipath
Verify start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
One device down, one up
TEST: IPv4 fibmatch on down device [ OK ]
TEST: IPv6 fibmatch on down device [ OK ]
TEST: IPv4 fibmatch on up device [ OK ]
TEST: IPv6 fibmatch on up device [ OK ]
TEST: IPv4 flags on down device [ OK ]
TEST: IPv6 flags on down device [ OK ]
TEST: IPv4 flags on up device [ OK ]
TEST: IPv6 flags on up device [ OK ]
Other device down and up
TEST: IPv4 fibmatch on down device [ OK ]
TEST: IPv6 fibmatch on down device [ OK ]
TEST: IPv4 fibmatch on up device [ OK ]
TEST: IPv6 fibmatch on up device [ OK ]
TEST: IPv4 flags on down device [ OK ]
TEST: IPv6 flags on down device [ OK ]
TEST: IPv4 flags on up device [ OK ]
TEST: IPv6 flags on up device [ OK ]
Both devices down
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
Local carrier tests - single path
Start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 - no linkdown flag [ OK ]
TEST: IPv6 - no linkdown flag [ OK ]
Carrier off on nexthop
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 - linkdown flag set [ OK ]
TEST: IPv6 - linkdown flag set [ OK ]
Route to local address with carrier down
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 linkdown flag set [ OK ]
TEST: IPv6 linkdown flag set [ OK ]
Single path route carrier test
Start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 no linkdown flag [ OK ]
TEST: IPv6 no linkdown flag [ OK ]
Carrier down
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 linkdown flag set [ OK ]
TEST: IPv6 linkdown flag set [ OK ]
Second address added with carrier down
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 linkdown flag set [ OK ]
TEST: IPv6 linkdown flag set [ OK ]
IPv4 nexthop tests
<<< write me >>>
IPv6 nexthop tests
TEST: Directly connected nexthop, unicast address [ OK ]
TEST: Directly connected nexthop, unicast address with device [ OK ]
TEST: Gateway is linklocal address [ OK ]
TEST: Gateway is linklocal address, no device [ OK ]
TEST: Gateway can not be local unicast address [ OK ]
TEST: Gateway can not be local unicast address, with device [ OK ]
TEST: Gateway can not be a local linklocal address [ OK ]
TEST: Gateway can be local address in a VRF [ OK ]
TEST: Gateway can be local address in a VRF, with device [ OK ]
TEST: Gateway can be local linklocal address in a VRF [ OK ]
TEST: Redirect to VRF lookup [ OK ]
TEST: VRF route, gateway can be local address in default VRF [ OK ]
TEST: VRF route, gateway can not be a local address [ OK ]
TEST: VRF route, gateway can not be a local addr with device [ OK ]
IPv6 route add / append tests
TEST: Attempt to add duplicate route - gw [ OK ]
TEST: Attempt to add duplicate route - dev only [ OK ]
TEST: Attempt to add duplicate route - reject route [ OK ]
TEST: Append nexthop to existing route - gw [ OK ]
TEST: Add multipath route [ OK ]
TEST: Attempt to add duplicate multipath route [ OK ]
TEST: Route add with different metrics [ OK ]
TEST: Route delete with metric [ OK ]
IPv6 route replace tests
TEST: Single path with single path [ OK ]
TEST: Single path with multipath [ OK ]
TEST: Single path with single path via multipath attribute [ OK ]
TEST: Invalid nexthop [ OK ]
TEST: Single path - replace of non-existent route [ OK ]
TEST: Multipath with multipath [ OK ]
TEST: Multipath with single path [ OK ]
TEST: Multipath with single path via multipath attribute [ OK ]
TEST: Multipath - invalid first nexthop [ OK ]
TEST: Multipath - invalid second nexthop [ OK ]
TEST: Multipath - replace of non-existent route [ OK ]
IPv4 route add / append tests
TEST: Attempt to add duplicate route - gw [ OK ]
TEST: Attempt to add duplicate route - dev only [ OK ]
TEST: Attempt to add duplicate route - reject route [ OK ]
TEST: Add new nexthop for existing prefix [ OK ]
TEST: Append nexthop to existing route - gw [ OK ]
TEST: Append nexthop to existing route - dev only [ OK ]
TEST: Append nexthop to existing route - reject route [ OK ]
TEST: Append nexthop to existing reject route - gw [ OK ]
TEST: Append nexthop to existing reject route - dev only [ OK ]
TEST: add multipath route [ OK ]
TEST: Attempt to add duplicate multipath route [ OK ]
TEST: Route add with different metrics [ OK ]
TEST: Route delete with metric [ OK ]
IPv4 route replace tests
TEST: Single path with single path [ OK ]
TEST: Single path with multipath [ OK ]
TEST: Single path with reject route [ OK ]
TEST: Single path with single path via multipath attribute [ OK ]
TEST: Invalid nexthop [ OK ]
TEST: Single path - replace of non-existent route [ OK ]
TEST: Multipath with multipath [ OK ]
TEST: Multipath with single path [ OK ]
TEST: Multipath with single path via multipath attribute [ OK ]
TEST: Multipath with reject route [ OK ]
TEST: Multipath - invalid first nexthop [ OK ]
TEST: Multipath - invalid second nexthop [ OK ]
TEST: Multipath - replace of non-existent route [ OK ]
IPv6 prefix route tests
TEST: Default metric [ OK ]
TEST: User specified metric on first device [ OK ]
TEST: User specified metric on second device [ OK ]
TEST: Delete of address on first device [ OK ]
TEST: Modify metric of address [ OK ]
Command line is not complete. Try option "help"
TEST: Prefix route removed on link down [ OK ]
TEST: Prefix route with metric on link up [ OK ]
IPv4 prefix route tests
TEST: Default metric [ OK ]
TEST: User specified metric on first device [ OK ]
TEST: User specified metric on second device [ OK ]
TEST: Delete of address on first device [ OK ]
TEST: Modify metric of address [ OK ]
Command line is not complete. Try option "help"
TEST: Prefix route removed on link down [ OK ]
TEST: Prefix route with metric on link up [ OK ]
IPv6 routes with metrics
TEST: Single path route with mtu metric [ OK ]
TEST: Multipath route via 2 single routes with mtu metric on first [ OK ]
TEST: Multipath route via 2 single routes with mtu metric on 2nd [ OK ]
TEST: MTU of second leg [ OK ]
TEST: Multipath route with mtu metric [ OK ]
TEST: Using route with mtu metric [ OK ]
TEST: Invalid metric (fails metric_convert) [ OK ]
IPv4 route add / append tests
TEST: Single path route with mtu metric [ OK ]
TEST: Multipath route with mtu metric [ OK ]
TEST: Using route with mtu metric [ OK ]
TEST: Invalid metric (fails metric_convert) [ OK ]
Tests passed: 141
Tests failed: 0
ok 1..12 selftests: net: fib_tests.sh [PASS]
selftests: net: fib-onlink-tests.sh
========================================
########################################
Configuring interfaces
RTNETLINK answers: File exists
not ok 1..13 selftests: net: fib-onlink-tests.sh [FAIL]
selftests: net: pmtu.sh
========================================
TEST: ipv4: PMTU exceptions [ OK ]
connect: Cannot assign requested address
connect: Cannot assign requested address
TEST: ipv6: PMTU exceptions [FAIL]
PMTU exception wasn't created after exceeding MTU
TEST: vti6: PMTU exceptions [ OK ]
TEST: vti4: PMTU exceptions [ OK ]
TEST: vti4: default MTU assignment [ OK ]
TEST: vti6: default MTU assignment [ OK ]
TEST: vti4: MTU setting on link creation [ OK ]
TEST: vti6: MTU setting on link creation [ OK ]
TEST: vti6: MTU changes on link changes [ OK ]
not ok 1..14 selftests: net: pmtu.sh [FAIL]
selftests: net: udpgso.sh
========================================
ipv4 cmsg
device mtu (orig): 65536
device mtu (test): 1500
ipv4 tx:1 gso:0
ipv4 tx:1472 gso:0
ipv4 tx:1473 gso:0 (fail)
ipv4 tx:1472 gso:1472 (fail)
ipv4 tx:1473 gso:1472
ipv4 tx:2944 gso:1472
ipv4 tx:2945 gso:1472
ipv4 tx:64768 gso:1472
ipv4 tx:65507 gso:1472
ipv4 tx:65508 gso:1472 (fail)
ipv4 tx:1 gso:1 (fail)
ipv4 tx:2 gso:1
ipv4 tx:5 gso:2
ipv4 tx:36 gso:1
ipv4 tx:37 gso:1 (fail)
OK
ipv4 setsockopt
device mtu (orig): 65536
device mtu (test): 1500
ipv4 tx:1 gso:0
ipv4 tx:1472 gso:0
ipv4 tx:1473 gso:0 (fail)
ipv4 tx:1472 gso:1472 (fail)
ipv4 tx:1473 gso:1472
ipv4 tx:2944 gso:1472
ipv4 tx:2945 gso:1472
ipv4 tx:64768 gso:1472
ipv4 tx:65507 gso:1472
ipv4 tx:65508 gso:1472 (fail)
ipv4 tx:1 gso:1 (fail)
ipv4 tx:2 gso:1
ipv4 tx:5 gso:2
ipv4 tx:36 gso:1
ipv4 tx:37 gso:1 (fail)
OK
ipv6 cmsg
device mtu (orig): 65536
device mtu (test): 1500
ipv6 tx:1 gso:0
ipv6 tx:1452 gso:0
ipv6 tx:1453 gso:0 (fail)
ipv6 tx:1452 gso:1452 (fail)
ipv6 tx:1453 gso:1452
ipv6 tx:2904 gso:1452
ipv6 tx:2905 gso:1452
ipv6 tx:65340 gso:1452
ipv6 tx:65527 gso:1452
ipv6 tx:65528 gso:1452 (fail)
ipv6 tx:1 gso:1 (fail)
ipv6 tx:2 gso:1
ipv6 tx:5 gso:2
ipv6 tx:16 gso:1
ipv6 tx:17 gso:1 (fail)
OK
ipv6 setsockopt
device mtu (orig): 65536
device mtu (test): 1500
ipv6 tx:1 gso:0
ipv6 tx:1452 gso:0
ipv6 tx:1453 gso:0 (fail)
ipv6 tx:1452 gso:1452 (fail)
ipv6 tx:1453 gso:1452
ipv6 tx:2904 gso:1452
ipv6 tx:2905 gso:1452
ipv6 tx:65340 gso:1452
ipv6 tx:65527 gso:1452
ipv6 tx:65528 gso:1452 (fail)
ipv6 tx:1 gso:1 (fail)
ipv6 tx:2 gso:1
ipv6 tx:5 gso:2
ipv6 tx:16 gso:1
ipv6 tx:17 gso:1 (fail)
OK
ipv4 connected
device mtu (orig): 65536
device mtu (test): 1600
route mtu (test): 1500
path mtu (read): 1500
ipv4 tx:1 gso:0
ipv4 tx:1472 gso:0
ipv4 tx:1473 gso:0 (fail)
ipv4 tx:1472 gso:1472 (fail)
ipv4 tx:1473 gso:1472
ipv4 tx:2944 gso:1472
ipv4 tx:2945 gso:1472
ipv4 tx:64768 gso:1472
ipv4 tx:65507 gso:1472
ipv4 tx:65508 gso:1472 (fail)
ipv4 tx:1 gso:1 (fail)
ipv4 tx:2 gso:1
ipv4 tx:5 gso:2
ipv4 tx:36 gso:1
ipv4 tx:37 gso:1 (fail)
OK
ipv4 msg_more
device mtu (orig): 65536
device mtu (test): 1500
ipv4 tx:1 gso:0
ipv4 tx:1472 gso:0
ipv4 tx:1473 gso:0 (fail)
ipv4 tx:1472 gso:1472 (fail)
ipv4 tx:1473 gso:1472
ipv4 tx:2944 gso:1472
ipv4 tx:2945 gso:1472
ipv4 tx:64768 gso:1472
ipv4 tx:65507 gso:1472
ipv4 tx:65508 gso:1472 (fail)
ipv4 tx:1 gso:1 (fail)
ipv4 tx:2 gso:1
ipv4 tx:5 gso:2
ipv4 tx:36 gso:1
ipv4 tx:37 gso:1 (fail)
OK
ipv6 msg_more
device mtu (orig): 65536
device mtu (test): 1500
ipv6 tx:1 gso:0
ipv6 tx:1452 gso:0
ipv6 tx:1453 gso:0 (fail)
ipv6 tx:1452 gso:1452 (fail)
ipv6 tx:1453 gso:1452
ipv6 tx:2904 gso:1452
ipv6 tx:2905 gso:1452
ipv6 tx:65340 gso:1452
ipv6 tx:65527 gso:1452
ipv6 tx:65528 gso:1452 (fail)
ipv6 tx:1 gso:1 (fail)
ipv6 tx:2 gso:1
ipv6 tx:5 gso:2
ipv6 tx:16 gso:1
ipv6 tx:17 gso:1 (fail)
OK
ok 1..15 selftests: net: udpgso.sh [PASS]
selftests: net: ip_defrag.sh
========================================
ipv4 defrag
PASS
seed = 1543106351
ipv4 defrag with overlaps
PASS
seed = 1543106355
ipv6 defrag
PASS
seed = 1543106374
ipv6 defrag with overlaps
PASS
seed = 1543106374
ok 1..16 selftests: net: ip_defrag.sh [PASS]
selftests: net: udpgso_bench.sh
========================================
ipv4
tcp
tcp rx: 935 MB/s 15875 calls/s
tcp tx: 935 MB/s 15874 calls/s 15874 msg/s
tcp rx: 806 MB/s 13677 calls/s
tcp tx: 806 MB/s 13678 calls/s 13678 msg/s
tcp rx: 694 MB/s 11774 calls/s
tcp tx: 694 MB/s 11775 calls/s 11775 msg/s
tcp zerocopy
tcp rx: 809 MB/s 13738 calls/s
tcp tx: 809 MB/s 13737 calls/s 13737 msg/s
tcp rx: 743 MB/s 12614 calls/s
tcp tx: 743 MB/s 12617 calls/s 12617 msg/s
tcp rx: 497 MB/s 8432 calls/s
tcp tx: 497 MB/s 8431 calls/s 8431 msg/s
udp
udp rx: 37 MB/s 26903 calls/s
udp tx: 42 MB/s 30282 calls/s 721 msg/s
udp rx: 45 MB/s 32314 calls/s
udp tx: 46 MB/s 33306 calls/s 793 msg/s
udp rx: 52 MB/s 37362 calls/s
udp tx: 54 MB/s 38682 calls/s 921 msg/s
udp rx: 54 MB/s 38759 calls/s
udp gso
udp rx: 210 MB/s 149759 calls/s
udp tx: 285 MB/s 4834 calls/s 4834 msg/s
udp rx: 245 MB/s 175032 calls/s
udp tx: 272 MB/s 4622 calls/s 4622 msg/s
udp rx: 191 MB/s 136218 calls/s
udp tx: 222 MB/s 3774 calls/s 3774 msg/s
udp rx: 142 MB/s 101574 calls/s
ipv6
tcp
tcp rx: 694 MB/s 11774 calls/s
tcp tx: 694 MB/s 11773 calls/s 11773 msg/s
tcp rx: 687 MB/s 11655 calls/s
tcp tx: 688 MB/s 11673 calls/s 11673 msg/s
tcp rx: 736 MB/s 12493 calls/s
tcp tx: 735 MB/s 12483 calls/s 12483 msg/s
tcp zerocopy
tcp rx: 426 MB/s 7240 calls/s
tcp tx: 426 MB/s 7240 calls/s 7240 msg/s
tcp tx: 815 MB/s 13823 calls/s 13823 msg/s
tcp tx: 1026 MB/s 17415 calls/s 17415 msg/s
udp
udp rx: 43 MB/s 31711 calls/s
udp tx: 47 MB/s 34572 calls/s 804 msg/s
udp rx: 34 MB/s 25217 calls/s
udp tx: 35 MB/s 25886 calls/s 602 msg/s
udp rx: 43 MB/s 31894 calls/s
udp tx: 42 MB/s 31304 calls/s 728 msg/s
udp rx: 49 MB/s 36335 calls/s
udp gso
udp rx: 130 MB/s 95426 calls/s
udp tx: 167 MB/s 2843 calls/s 2843 msg/s
udp rx: 137 MB/s 100546 calls/s
udp tx: 291 MB/s 4950 calls/s 4950 msg/s
udp rx: 137 MB/s 100216 calls/s
udp tx: 174 MB/s 2967 calls/s 2967 msg/s
udp rx: 115 MB/s 83993 calls/s
ok 1..17 selftests: net: udpgso_bench.sh [PASS]
selftests: net: fib_rule_tests.sh
========================================
######################################################################
TEST SECTION: IPv4 fib rule
######################################################################
TEST: rule4 check: oif dummy0 [ OK ]
TEST: rule4 del by pref: oif dummy0 [ OK ]
RTNETLINK answers: No route to host
TEST: rule4 check: from 192.51.100.3 iif dummy0 [FAIL]
TEST: rule4 del by pref: from 192.51.100.3 iif dummy0 [ OK ]
TEST: rule4 check: tos 0x10 [ OK ]
TEST: rule4 del by pref: tos 0x10 [ OK ]
TEST: rule4 check: fwmark 0x64 [ OK ]
TEST: rule4 del by pref: fwmark 0x64 [ OK ]
TEST: rule4 check: uidrange 100-100 [ OK ]
TEST: rule4 del by pref: uidrange 100-100 [ OK ]
TEST: rule4 check: sport 666 dport 777 [ OK ]
TEST: rule4 del by pref: sport 666 dport 777 [ OK ]
TEST: rule4 check: ipproto tcp [ OK ]
TEST: rule4 del by pref: ipproto tcp [ OK ]
TEST: rule4 check: ipproto icmp [ OK ]
TEST: rule4 del by pref: ipproto icmp [ OK ]
######################################################################
TEST SECTION: IPv6 fib rule
######################################################################
TEST: rule6 check: oif dummy0 [ OK ]
TEST: rule6 del by pref: oif dummy0 [ OK ]
TEST: rule6 check: from 2001:db8:1::3 iif dummy0 [ OK ]
TEST: rule6 del by pref: from 2001:db8:1::3 iif dummy0 [ OK ]
TEST: rule6 check: tos 0x10 [ OK ]
TEST: rule6 del by pref: tos 0x10 [ OK ]
TEST: rule6 check: fwmark 0x64 [ OK ]
TEST: rule6 del by pref: fwmark 0x64 [ OK ]
TEST: rule6 check: uidrange 100-100 [ OK ]
TEST: rule6 del by pref: uidrange 100-100 [ OK ]
TEST: rule6 check: sport 666 dport 777 [ OK ]
TEST: rule6 del by pref: sport 666 dport 777 [ OK ]
TEST: rule6 check: ipproto tcp [ OK ]
TEST: rule6 del by pref: ipproto tcp [ OK ]
TEST: rule6 check: ipproto icmp [ OK ]
TEST: rule6 del by pref: ipproto icmp [ OK ]
ok 1..18 selftests: net: fib_rule_tests.sh [PASS]
selftests: net: msg_zerocopy.sh
========================================
ipv4 tcp -t 1
./msg_zerocopy: setaffinity 2
./msg_zerocopy: setaffinity 3
not ok 1..19 selftests: net: msg_zerocopy.sh [FAIL]
selftests: net: psock_snd.sh
========================================
dgram
tx: 128
rx: 142
rx: 100
OK
dgram bind
tx: 128
rx: 142
rx: 100
OK
raw
tx: 142
rx: 142
rx: 100
OK
raw bind
tx: 142
rx: 142
rx: 100
OK
raw qdisc bypass
tx: 142
rx: 142
rx: 100
OK
raw vlan
tx: 146
rx: 100
OK
raw vnet hdr
tx: 152
rx: 142
rx: 100
OK
raw csum_off
tx: 152
rx: 142
rx: 100
OK
raw csum_off with bad offset (fails)
./psock_snd: write: Invalid argument
raw min size
tx: 42
rx: 0
OK
raw mtu size
tx: 1514
rx: 1472
OK
raw mtu size + 1 (fails)
./psock_snd: write: Message too long
raw vlan mtu size + 1 (fails)
./psock_snd: write: Message too long
dgram mtu size
tx: 1500
rx: 1472
OK
dgram mtu size + 1 (fails)
./psock_snd: write: Message too long
raw truncate hlen (fails: does not arrive)
tx: 14
./psock_snd: recv: Resource temporarily unavailable
raw truncate hlen - 1 (fails: EINVAL)
./psock_snd: write: Invalid argument
raw gso min size
tx: 1525
rx: 1473
OK
raw gso min size - 1 (fails)
tx: 1524
./psock_snd: recv: Resource temporarily unavailable
raw gso max size
tx: 65559
rx: 65507
OK
raw gso max size + 1 (fails)
tx: 65560
./psock_snd: recv: Resource temporarily unavailable
OK. All tests passed
ok 1..20 selftests: net: psock_snd.sh [PASS]
selftests: net: udpgro_bench.sh
========================================
Missing xdp_dummy helper. Build bpf selftest first
not ok 1..21 selftests: net: udpgro_bench.sh [FAIL]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/net'
2018-11-25 00:40:29 make run_tests -C nsfs
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/nsfs'
gcc -Wall -Werror owner.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/nsfs/owner
gcc -Wall -Werror pidns.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/nsfs/pidns
TAP version 13
selftests: nsfs: owner
========================================
ok 1..1 selftests: nsfs: owner [PASS]
selftests: nsfs: pidns
========================================
ok 1..2 selftests: nsfs: pidns [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/nsfs'
ignored_by_lkp powerpc test
prctl test: not in Makefile
2018-11-25 00:40:31 make TARGETS=prctl
make[1]: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/prctl'
Makefile:14: warning: overriding recipe for target 'clean'
../lib.mk:137: warning: ignoring old recipe for target 'clean'
gcc disable-tsc-ctxt-sw-stress-test.c -o disable-tsc-ctxt-sw-stress-test
gcc disable-tsc-on-off-stress-test.c -o disable-tsc-on-off-stress-test
gcc disable-tsc-test.c -o disable-tsc-test
make[1]: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/prctl'
2018-11-25 00:40:33 make run_tests -C prctl
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/prctl'
Makefile:14: warning: overriding recipe for target 'clean'
../lib.mk:137: warning: ignoring old recipe for target 'clean'
TAP version 13
selftests: prctl: disable-tsc-ctxt-sw-stress-test
========================================
[No further output means we're allright]
ok 1..1 selftests: prctl: disable-tsc-ctxt-sw-stress-test [PASS]
selftests: prctl: disable-tsc-on-off-stress-test
========================================
[No further output means we're allright]
ok 1..2 selftests: prctl: disable-tsc-on-off-stress-test [PASS]
selftests: prctl: disable-tsc-test
========================================
rdtsc() == 1589588964874
prctl(PR_GET_TSC, &tsc_val); tsc_val == PR_TSC_ENABLE
rdtsc() == 1589590646386
prctl(PR_SET_TSC, PR_TSC_ENABLE)
rdtsc() == 1589591184400
prctl(PR_SET_TSC, PR_TSC_SIGSEGV)
rdtsc() == [ SIG_SEGV ]
prctl(PR_GET_TSC, &tsc_val); tsc_val == PR_TSC_SIGSEGV
prctl(PR_SET_TSC, PR_TSC_ENABLE)
rdtsc() == 1589593359860
ok 1..3 selftests: prctl: disable-tsc-test [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/prctl'
2018-11-25 00:41:11 make run_tests -C proc
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/proc'
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE fd-001-lookup.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/proc/fd-001-lookup
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE fd-002-posix-eq.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/proc/fd-002-posix-eq
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE fd-003-kthread.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/proc/fd-003-kthread
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-loadavg-001.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/proc/proc-loadavg-001
proc-loadavg-001.c:17:0: warning: "_GNU_SOURCE" redefined
#define _GNU_SOURCE
<command-line>:0:0: note: this is the location of the previous definition
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-self-map-files-001.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/proc/proc-self-map-files-001
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-self-map-files-002.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/proc/proc-self-map-files-002
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-self-syscall.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/proc/proc-self-syscall
proc-self-syscall.c:16:0: warning: "_GNU_SOURCE" redefined
#define _GNU_SOURCE
<command-line>:0:0: note: this is the location of the previous definition
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-self-wchan.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/proc/proc-self-wchan
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-uptime-001.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/proc/proc-uptime-001
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-uptime-002.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/proc/proc-uptime-002
proc-uptime-002.c:18:0: warning: "_GNU_SOURCE" redefined
#define _GNU_SOURCE
<command-line>:0:0: note: this is the location of the previous definition
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE read.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/proc/read
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE self.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/proc/self
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE thread-self.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/proc/thread-self
TAP version 13
selftests: proc: fd-001-lookup
========================================
ok 1..1 selftests: proc: fd-001-lookup [PASS]
selftests: proc: fd-002-posix-eq
========================================
ok 1..2 selftests: proc: fd-002-posix-eq [PASS]
selftests: proc: fd-003-kthread
========================================
ok 1..3 selftests: proc: fd-003-kthread [PASS]
selftests: proc: proc-loadavg-001
========================================
ok 1..4 selftests: proc: proc-loadavg-001 [PASS]
selftests: proc: proc-self-map-files-001
========================================
ok 1..5 selftests: proc: proc-self-map-files-001 [PASS]
selftests: proc: proc-self-map-files-002
========================================
ok 1..6 selftests: proc: proc-self-map-files-002 [PASS]
selftests: proc: proc-self-syscall
========================================
ok 1..7 selftests: proc: proc-self-syscall [PASS]
selftests: proc: proc-self-wchan
========================================
ok 1..8 selftests: proc: proc-self-wchan [PASS]
selftests: proc: proc-uptime-001
========================================
ok 1..9 selftests: proc: proc-uptime-001 [PASS]
selftests: proc: proc-uptime-002
========================================
ok 1..10 selftests: proc: proc-uptime-002 [PASS]
selftests: proc: read
========================================
ok 1..11 selftests: proc: read [PASS]
selftests: proc: self
========================================
ok 1..12 selftests: proc: self [PASS]
selftests: proc: thread-self
========================================
ok 1..13 selftests: proc: thread-self [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/proc'
2018-11-25 00:41:28 make run_tests -C pstore
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/pstore'
TAP version 13
selftests: pstore: pstore_tests
========================================
=== Pstore unit tests (pstore_tests) ===
UUID=042cf194-15d3-468e-8800-8abf78de0ff3
Checking pstore backend is registered ... ok
backend=ramoops
cmdline=ip=::::vm-lkp-hsw-4ep1-8G-17::dhcp root=/dev/ram0 user=lkp job=/lkp/jobs/scheduled/vm-lkp-hsw-4ep1-8G-17/kernel_selftests-kselftests-02-debian-x86_64-2018-04-03.cgz-e87f53b4fab72f95952c17f672088e082e8e79ab-20181124-57566-24143s-1.yaml ARCH=x86_64 kconfig=x86_64-rhel-7.2 branch=linux-devel/devel-hourly-2018112308 commit=e87f53b4fab72f95952c17f672088e082e8e79ab BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-7/e87f53b4fab72f95952c17f672088e082e8e79ab/vmlinuz-4.20.0-rc1-00120-ge87f53b erst_disable max_uptime=3600 RESULT_ROOT=/result/kernel_selftests/kselftests-02/vm-lkp-hsw-4ep1-8G/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.2/gcc-7/e87f53b4fab72f95952c17f672088e082e8e79ab/3 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw rcuperf.shutdown=0
Checking pstore console is registered ... ok
Checking /dev/pmsg0 exists ... ok
Writing unique string to /dev/pmsg0 ... ok
ok 1..1 selftests: pstore: pstore_tests [PASS]
selftests: pstore: pstore_post_reboot_tests
========================================
=== Pstore unit tests (pstore_post_reboot_tests) ===
UUID=01d25071-dbdb-45da-8f68-8aab39639929
Checking pstore backend is registered ... ok
backend=ramoops
cmdline=ip=::::vm-lkp-hsw-4ep1-8G-17::dhcp root=/dev/ram0 user=lkp job=/lkp/jobs/scheduled/vm-lkp-hsw-4ep1-8G-17/kernel_selftests-kselftests-02-debian-x86_64-2018-04-03.cgz-e87f53b4fab72f95952c17f672088e082e8e79ab-20181124-57566-24143s-1.yaml ARCH=x86_64 kconfig=x86_64-rhel-7.2 branch=linux-devel/devel-hourly-2018112308 commit=e87f53b4fab72f95952c17f672088e082e8e79ab BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-7/e87f53b4fab72f95952c17f672088e082e8e79ab/vmlinuz-4.20.0-rc1-00120-ge87f53b erst_disable max_uptime=3600 RESULT_ROOT=/result/kernel_selftests/kselftests-02/vm-lkp-hsw-4ep1-8G/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.2/gcc-7/e87f53b4fab72f95952c17f672088e082e8e79ab/3 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw rcuperf.shutdown=0
pstore_crash_test has not been executed yet. we skip further tests.
not ok 1..2 selftests: pstore: pstore_post_reboot_tests [SKIP]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/pstore'
ptp test: not in Makefile
2018-11-25 00:41:29 make TARGETS=ptp
make[1]: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/ptp'
Makefile:10: warning: overriding recipe for target 'clean'
../lib.mk:137: warning: ignoring old recipe for target 'clean'
gcc -I../../../../usr/include/ testptp.c -lrt -o testptp
make[1]: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/ptp'
2018-11-25 00:41:30 make run_tests -C ptp
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/ptp'
Makefile:10: warning: overriding recipe for target 'clean'
../lib.mk:137: warning: ignoring old recipe for target 'clean'
TAP version 13
selftests: ptp: testptp
========================================
ok 1..1 selftests: ptp: testptp [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/ptp'
2018-11-25 00:41:30 make run_tests -C ptrace
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/ptrace'
gcc -iquote../../../../include/uapi -Wall peeksiginfo.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/ptrace/peeksiginfo
TAP version 13
selftests: ptrace: peeksiginfo
========================================
PASS
ok 1..1 selftests: ptrace: peeksiginfo [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/ptrace'
2018-11-25 00:41:32 make run_tests -C rseq
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/rseq'
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ -shared -fPIC rseq.c -lpthread -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/rseq/librseq.so
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ basic_test.c -lpthread -lrseq -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/rseq/basic_test
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ basic_percpu_ops_test.c -lpthread -lrseq -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/rseq/basic_percpu_ops_test
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ param_test.c -lpthread -lrseq -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/rseq/param_test
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ -DBENCHMARK param_test.c -lpthread -lrseq -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/rseq/param_test_benchmark
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ -DRSEQ_COMPARE_TWICE param_test.c -lpthread -lrseq -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/rseq/param_test_compare_twice
TAP version 13
selftests: rseq: basic_test
========================================
testing current cpu
ok 1..1 selftests: rseq: basic_test [PASS]
selftests: rseq: basic_percpu_ops_test
========================================
spinlock
percpu_list
ok 1..2 selftests: rseq: basic_percpu_ops_test [PASS]
selftests: rseq: param_test
========================================
ok 1..3 selftests: rseq: param_test [PASS]
selftests: rseq: param_test_benchmark
========================================
ok 1..4 selftests: rseq: param_test_benchmark [PASS]
selftests: rseq: param_test_compare_twice
========================================
ok 1..5 selftests: rseq: param_test_compare_twice [PASS]
selftests: rseq: run_param_test.sh
========================================
Default parameters
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Loop injection: 10000 loops
Injecting at <1>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <2>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <3>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <4>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <5>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <6>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Yield injection (25%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Yield injection (50%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Yield injection (100%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Kill injection (25%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Kill injection (50%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Kill injection (100%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Sleep injection (1ms, 25%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Sleep injection (1ms, 50%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Sleep injection (1ms, 100%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
ok 1..6 selftests: rseq: run_param_test.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/rseq'
2018-11-25 01:08:22 make run_tests -C rtc
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/rtc'
gcc -O3 -Wl,-no-as-needed -Wall -lrt -lpthread -lm rtctest.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/rtc/rtctest
gcc -O3 -Wl,-no-as-needed -Wall -lrt -lpthread -lm setdate.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/rtc/setdate
TAP version 13
selftests: rtc: rtctest
========================================
rtctest.c:49:rtc.date_read:Current RTC date/time is 25/11/2018 01:08:32.
rtctest.c:137:rtc.alarm_alm_set:Alarm time now set to 01:08:41.
rtctest.c:198:rtc.alarm_wkalm_set:Alarm time now set to 25/11/2018 01:08:44.
[==========] Running 5 tests from 2 test cases.
[ RUN ] rtc.date_read
[ OK ] rtc.date_read
[ RUN ] rtc.uie_read
[ OK ] rtc.uie_read
[ RUN ] rtc.uie_select
[ OK ] rtc.uie_select
[ RUN ] rtc.alarm_alm_set
[ OK ] rtc.alarm_alm_set
[ RUN ] rtc.alarm_wkalm_set
[ OK ] rtc.alarm_wkalm_set
[==========] 5 / 5 tests passed.
[ PASSED ]
ok 1..1 selftests: rtc: rtctest [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/rtc'
2018-11-25 01:08:43 make run_tests -C seccomp
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/seccomp'
gcc -Wl,-no-as-needed -Wall -lpthread seccomp_bpf.c -o seccomp_bpf
gcc -Wl,-no-as-needed -Wall seccomp_benchmark.c -o seccomp_benchmark
TAP version 13
selftests: seccomp: seccomp_bpf
========================================
[==========] Running 64 tests from 1 test cases.
[ RUN ] global.mode_strict_support
[ OK ] global.mode_strict_support
[ RUN ] global.mode_strict_cannot_call_prctl
[ OK ] global.mode_strict_cannot_call_prctl
[ RUN ] global.no_new_privs_support
[ OK ] global.no_new_privs_support
[ RUN ] global.mode_filter_support
[ OK ] global.mode_filter_support
[ RUN ] global.mode_filter_without_nnp
[ OK ] global.mode_filter_without_nnp
[ RUN ] global.filter_size_limits
[ OK ] global.filter_size_limits
[ RUN ] global.filter_chain_limits
[ OK ] global.filter_chain_limits
[ RUN ] global.mode_filter_cannot_move_to_strict
[ OK ] global.mode_filter_cannot_move_to_strict
[ RUN ] global.mode_filter_get_seccomp
[ OK ] global.mode_filter_get_seccomp
[ RUN ] global.ALLOW_all
[ OK ] global.ALLOW_all
[ RUN ] global.empty_prog
[ OK ] global.empty_prog
[ RUN ] global.log_all
[ OK ] global.log_all
[ RUN ] global.unknown_ret_is_kill_inside
[ OK ] global.unknown_ret_is_kill_inside
[ RUN ] global.unknown_ret_is_kill_above_allow
[ OK ] global.unknown_ret_is_kill_above_allow
[ RUN ] global.KILL_all
[ OK ] global.KILL_all
[ RUN ] global.KILL_one
[ OK ] global.KILL_one
[ RUN ] global.KILL_one_arg_one
[ OK ] global.KILL_one_arg_one
[ RUN ] global.KILL_one_arg_six
[ OK ] global.KILL_one_arg_six
[ RUN ] global.KILL_thread
[==========] Running 64 tests from 1 test cases.
[ RUN ] global.mode_strict_support
[ OK ] global.mode_strict_support
[ RUN ] global.mode_strict_cannot_call_prctl
[ OK ] global.mode_strict_cannot_call_prctl
[ RUN ] global.no_new_privs_support
[ OK ] global.no_new_privs_support
[ RUN ] global.mode_filter_support
[ OK ] global.mode_filter_support
[ RUN ] global.mode_filter_without_nnp
[ OK ] global.mode_filter_without_nnp
[ RUN ] global.filter_size_limits
[ OK ] global.filter_size_limits
[ RUN ] global.filter_chain_limits
[ OK ] global.filter_chain_limits
[ RUN ] global.mode_filter_cannot_move_to_strict
[ OK ] global.mode_filter_cannot_move_to_strict
[ RUN ] global.mode_filter_get_seccomp
[ OK ] global.mode_filter_get_seccomp
[ RUN ] global.ALLOW_all
[ OK ] global.ALLOW_all
[ RUN ] global.empty_prog
[ OK ] global.empty_prog
[ RUN ] global.log_all
[ OK ] global.log_all
[ RUN ] global.unknown_ret_is_kill_inside
[ OK ] global.unknown_ret_is_kill_inside
[ RUN ] global.unknown_ret_is_kill_above_allow
[ OK ] global.unknown_ret_is_kill_above_allow
[ RUN ] global.KILL_all
[ OK ] global.KILL_all
[ RUN ] global.KILL_one
[ OK ] global.KILL_one
[ RUN ] global.KILL_one_arg_one
[ OK ] global.KILL_one_arg_one
[ RUN ] global.KILL_one_arg_six
[ OK ] global.KILL_one_arg_six
[ RUN ] global.KILL_thread
[ OK ] global.KILL_thread
[ RUN ] global.KILL_process
[ OK ] global.KILL_process
[ RUN ] global.arg_out_of_range
[ OK ] global.arg_out_of_range
[ RUN ] global.ERRNO_valid
[ OK ] global.ERRNO_valid
[ RUN ] global.ERRNO_zero
[ OK ] global.ERRNO_zero
[ RUN ] global.ERRNO_capped
[ OK ] global.ERRNO_capped
[ RUN ] global.ERRNO_order
[ OK ] global.ERRNO_order
[ RUN ] TRAP.dfl
[ OK ] TRAP.dfl
[ RUN ] TRAP.ign
[ OK ] TRAP.ign
[ RUN ] TRAP.handler
[ OK ] TRAP.handler
[ RUN ] precedence.allow_ok
[ OK ] precedence.allow_ok
[ RUN ] precedence.kill_is_highest
[ OK ] precedence.kill_is_highest
[ RUN ] precedence.kill_is_highest_in_any_order
[ OK ] precedence.kill_is_highest_in_any_order
[ RUN ] precedence.trap_is_second
[ OK ] precedence.trap_is_second
[ RUN ] precedence.trap_is_second_in_any_order
[ OK ] precedence.trap_is_second_in_any_order
[ RUN ] precedence.errno_is_third
[ OK ] precedence.errno_is_third
[ RUN ] precedence.errno_is_third_in_any_order
[ OK ] precedence.errno_is_third_in_any_order
[ RUN ] precedence.trace_is_fourth
[ OK ] precedence.trace_is_fourth
[ RUN ] precedence.trace_is_fourth_in_any_order
[ OK ] precedence.trace_is_fourth_in_any_order
[ RUN ] precedence.log_is_fifth
[ OK ] precedence.log_is_fifth
[ RUN ] precedence.log_is_fifth_in_any_order
[ OK ] precedence.log_is_fifth_in_any_order
[ RUN ] TRACE_poke.read_has_side_effects
[ OK ] TRACE_poke.read_has_side_effects
[ RUN ] TRACE_poke.getpid_runs_normally
[ OK ] TRACE_poke.getpid_runs_normally
[ RUN ] TRACE_syscall.ptrace_syscall_redirected
[ OK ] TRACE_syscall.ptrace_syscall_redirected
[ RUN ] TRACE_syscall.ptrace_syscall_dropped
[ OK ] TRACE_syscall.ptrace_syscall_dropped
[ RUN ] TRACE_syscall.syscall_allowed
[ OK ] TRACE_syscall.syscall_allowed
[ RUN ] TRACE_syscall.syscall_redirected
[ OK ] TRACE_syscall.syscall_redirected
[ RUN ] TRACE_syscall.syscall_dropped
[ OK ] TRACE_syscall.syscall_dropped
[ RUN ] TRACE_syscall.skip_after_RET_TRACE
[ OK ] TRACE_syscall.skip_after_RET_TRACE
[ RUN ] TRACE_syscall.kill_after_RET_TRACE
[ OK ] TRACE_syscall.kill_after_RET_TRACE
[ RUN ] TRACE_syscall.skip_after_ptrace
[ OK ] TRACE_syscall.skip_after_ptrace
[ RUN ] TRACE_syscall.kill_after_ptrace
[ OK ] TRACE_syscall.kill_after_ptrace
[ RUN ] global.secseccomp_bpf.c:2736:global.syscall_restart:Expected getpid() (22267) == info._sifields._kill.si_pid (0)
global.syscall_restart: Test failed at step #22
comp_syscall
[ OK ] global.seccomp_syscall
[ RUN ] global.seccomp_syscall_mode_lock
[ OK ] global.seccomp_syscall_mode_lock
[ RUN ] global.detect_seccomp_filter_flags
[ OK ] global.detect_seccomp_filter_flags
[ RUN ] global.TSYNC_first
[ OK ] global.TSYNC_first
[ RUN ] TSYNC.siblings_fail_prctl
[ OK ] TSYNC.siblings_fail_prctl
[ RUN ] TSYNC.two_siblings_with_ancestor
[ OK ] TSYNC.two_siblings_with_ancestor
[ RUN ] TSYNC.two_sibling_want_nnp
[ OK ] TSYNC.two_sibling_want_nnp
[ RUN ] TSYNC.two_siblings_with_no_filter
[ OK ] TSYNC.two_siblings_with_no_filter
[ RUN ] TSYNC.two_siblings_with_one_divergence
[ OK ] TSYNC.two_siblings_with_one_divergence
[ RUN ] TSYNC.two_siblings_not_under_filter
[ OK ] TSYNC.two_siblings_not_under_filter
[ RUN ] global.syscall_restart
[ FAIL ] global.syscall_restart
[ RUN ] global.filter_flag_log
[ OK ] global.filter_flag_log
[ RUN ] global.get_action_avail
[ OK ] global.get_action_avail
[ RUN ] global.get_metadata
[ OK ] global.get_metadata
[==========] 63 / 64 tests passed.
[ FAILED ]
not ok 1..1 selftests: seccomp: seccomp_bpf [FAIL]
selftests: seccomp: seccomp_benchmark
========================================
Calibrating reasonable sample size...
1543108140.416969858 - 1543108140.416950844 = 19014
1543108140.417081384 - 1543108140.416997444 = 83940
1543108140.417159798 - 1543108140.417083544 = 76254
1543108140.417304504 - 1543108140.417161344 = 143160
1543108140.417632814 - 1543108140.417306308 = 326506
1543108140.418310752 - 1543108140.417634504 = 676248
1543108140.419540290 - 1543108140.418315902 = 1224388
1543108140.422041963 - 1543108140.419550816 = 2491147
1543108140.430717497 - 1543108140.422045989 = 8671508
1543108140.442199573 - 1543108140.430747917 = 11451656
1543108140.462471506 - 1543108140.442203589 = 20267917
1543108140.505385972 - 1543108140.462476189 = 42909783
1543108140.587205508 - 1543108140.505538206 = 81667302
1543108140.751635435 - 1543108140.587246274 = 164389161
1543108141.092382063 - 1543108140.751706015 = 340676048
1543108141.800657844 - 1543108141.092538639 = 708119205
1543108143.198346324 - 1543108141.800714077 = 1397632247
1543108146.490335756 - 1543108143.198694845 = 3291640911
1543108152.571913393 - 1543108146.490729070 = 6081184323
Benchmarking 8388608 samples...
18.568890412 - 12.000580652 = 6568309760
getpid native: 783 ns
28.683411696 - 18.574012667 = 10109399029
getpid RET_ALLOW: 1205 ns
Estimated seccomp overhead per syscall: 422 ns
ok 1..2 selftests: seccomp: seccomp_benchmark [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/seccomp'
2018-11-25 01:09:29 make run_tests -C sigaltstack
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sigaltstack'
gcc -Wall sas.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sigaltstack/sas
TAP version 13
selftests: sigaltstack: sas
========================================
ok 1 Initial sigaltstack state was SS_DISABLE
# [RUN] signal USR1
ok 2 sigaltstack is disabled in sighandler
# [RUN] switched to user ctx
# [RUN] signal USR2
# [OK] Stack preserved
ok 3 sigaltstack is still SS_AUTODISARM after signal
Pass 3 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
1..3
ok 1..1 selftests: sigaltstack: sas [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sigaltstack'
2018-11-25 01:09:31 make run_tests -C size
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/size'
gcc -static -ffreestanding -nostartfiles -s get_size.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/size/get_size
TAP version 13
selftests: size: get_size
========================================
TAP version 13
# Testing system size.
ok 1 get runtime memory use
# System runtime memory report (units in Kilobytes):
---
Total: 8161924
Free: 6012664
Buffer: 0
In use: 2149260
...
1..1
ok 1..1 selftests: size: get_size [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/size'
2018-11-25 01:09:32 make run_tests -C sparc64
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sparc64'
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sparc64'
2018-11-25 01:09:32 make run_tests -C splice
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/splice'
gcc default_file_splice_read.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/splice/default_file_splice_read
TAP version 13
selftests: splice: default_file_splice_read.sh
========================================
ok 1..1 selftests: splice: default_file_splice_read.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/splice'
2018-11-25 01:09:33 make run_tests -C static_keys
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/static_keys'
TAP version 13
selftests: static_keys: test_static_keys.sh
========================================
static_key: ok
ok 1..1 selftests: static_keys: test_static_keys.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/static_keys'
2018-11-25 01:09:33 make run_tests -C sync
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync'
gcc -c sync_alloc.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync_alloc.o
gcc -c sync_fence.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync_fence.o
gcc -c sync_merge.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync_merge.o
gcc -c sync_wait.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync_wait.o
gcc -c sync_stress_parallelism.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync_stress_parallelism.o
gcc -c sync_stress_consumer.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync_stress_consumer.o
gcc -c sync_stress_merge.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync_stress_merge.o
gcc -c sync_test.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync_test.o -O2 -g -std=gnu89 -pthread -Wall -Wextra -I../../../../usr/include/
gcc -c sync.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync.o -O2 -g -std=gnu89 -pthread -Wall -Wextra -I../../../../usr/include/
gcc -o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync_test /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync_test.o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync.o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync_alloc.o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync_fence.o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync_merge.o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync_wait.o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync_stress_parallelism.o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync_stress_consumer.o /usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync/sync_stress_merge.o -O2 -g -std=gnu89 -pthread -Wall -Wextra -I../../../../usr/include/ -pthread
TAP version 13
selftests: sync: sync_test
========================================
# [RUN] Testing sync framework
ok 1 [RUN] test_alloc_timeline
ok 2 [RUN] test_alloc_fence
ok 3 [RUN] test_alloc_fence_negative
ok 4 [RUN] test_fence_one_timeline_wait
ok 5 [RUN] test_fence_one_timeline_merge
ok 6 [RUN] test_fence_merge_same_fence
ok 7 [RUN] test_fence_multi_timeline_wait
ok 8 [RUN] test_stress_two_threads_shared_timeline
ok 9 [RUN] test_consumer_stress_multi_producer_single_consumer
ok 10 [RUN] test_merge_stress_random_merge
Pass 10 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
1..10
ok 1..1 selftests: sync: sync_test [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sync'
2018-11-25 01:09:49 make run_tests -C sysctl
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sysctl'
TAP version 13
selftests: sysctl: sysctl.sh
========================================
Checking production write strict setting ... ok
Sun Nov 25 01:09:50 UTC 2018
Running test: sysctl_test_0001 - run #0
== Testing sysctl behavior against /proc/sys/debug/test_sysctl/int_0001 ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Checking ignoring spaces up to PAGE_SIZE works on write ...ok
Checking passing PAGE_SIZE of spaces fails on write ...ok
Sun Nov 25 01:09:50 UTC 2018
Running test: sysctl_test_0002 - run #0
== Testing sysctl behavior against /proc/sys/debug/test_sysctl/string_0001 ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Writing entire sysctl in short writes ... ok
Writing middle of sysctl after unsynchronized seek ... ok
Checking sysctl maxlen is at least 65 ... ok
Checking sysctl keeps original string on overflow append ... ok
Checking sysctl stays NULL terminated on write ... ok
Checking sysctl stays NULL terminated on overwrite ... ok
Sun Nov 25 01:09:51 UTC 2018
Running test: sysctl_test_0003 - run #0
== Testing sysctl behavior against /proc/sys/debug/test_sysctl/int_0002 ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Checking ignoring spaces up to PAGE_SIZE works on write ...ok
Checking passing PAGE_SIZE of spaces fails on write ...ok
Testing INT_MAX works ...ok
Testing INT_MAX + 1 will fail as expected...ok
Testing negative values will work as expected...ok
Sun Nov 25 01:09:51 UTC 2018
Running test: sysctl_test_0004 - run #0
== Testing sysctl behavior against /proc/sys/debug/test_sysctl/uint_0001 ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Checking ignoring spaces up to PAGE_SIZE works on write ...ok
Checking passing PAGE_SIZE of spaces fails on write ...ok
Testing UINT_MAX works ...ok
Testing UINT_MAX + 1 will fail as expected...ok
Testing negative values will not work as expected ...ok
Sun Nov 25 01:09:52 UTC 2018
Running test: sysctl_test_0005 - run #0
Testing array works as expected ... ok
Testing skipping trailing array elements works ... ok
Testing PAGE_SIZE limit on array works ... ok
Testing exceeding PAGE_SIZE limit fails as expected ... Files - and /proc/sys/debug/test_sysctl/int_0003 differ
ok
Sun Nov 25 01:09:52 UTC 2018
Running test: sysctl_test_0005 - run #1
Testing array works as expected ... ok
Testing skipping trailing array elements works ... ok
Testing PAGE_SIZE limit on array works ... ok
Testing exceeding PAGE_SIZE limit fails as expected ... Files - and /proc/sys/debug/test_sysctl/int_0003 differ
ok
Sun Nov 25 01:09:52 UTC 2018
Running test: sysctl_test_0005 - run #2
Testing array works as expected ... ok
Testing skipping trailing array elements works ... ok
Testing PAGE_SIZE limit on array works ... ok
Testing exceeding PAGE_SIZE limit fails as expected ... Files - and /proc/sys/debug/test_sysctl/int_0003 differ
ok
ok 1..1 selftests: sysctl: sysctl.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-e87f53b4fab72f95952c17f672088e082e8e79ab/tools/testing/selftests/sysctl'
To reproduce:
git clone https://github.com/intel/lkp-tests.git
cd lkp-tests
bin/lkp qemu -k <bzImage> job-script # job-script is attached in this email
Thanks,
Rong Chen
View attachment "config-4.20.0-rc1-00120-ge87f53b" of type "text/plain" (168463 bytes)
View attachment "job-script" of type "text/plain" (6097 bytes)
Download attachment "dmesg.xz" of type "application/x-xz" (54052 bytes)
View attachment "kernel_selftests" of type "text/plain" (123024 bytes)
Powered by blists - more mailing lists