| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <578f79ce10c51bbb7bd6f44395e10a3369a050f4.1543335819.git.amit.kucheria@linaro.org>
Date: Tue, 27 Nov 2018 21:59:05 +0530
From: Amit Kucheria <amit.kucheria@...aro.org>
To: linux-kernel@...r.kernel.org
Cc: linux-arm-msm@...r.kernel.org, bjorn.andersson@...aro.org,
edubezval@...il.com, andy.gross@...aro.org, vkoul@...nel.org,
khasim.mohammed@...aro.org, Zhang Rui <rui.zhang@...el.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>
Subject: [PATCH v3 2/4] drivers: thermal: tsens: Add generic support for TSENS v1 IP
qcs404 has a single TSENS IP block with 10 sensors. It uses version 1.4
of the TSENS IP, functionality for which is encapsulated inside
qcom,tsens-v1 compatible.
Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
Reviewed-by: Vinod Koul <vkoul@...nel.org>
Tested-by: Vinod Koul <vkoul@...nel.org>
---
drivers/thermal/qcom/Makefile | 2 +-
drivers/thermal/qcom/tsens-common.c | 2 +-
drivers/thermal/qcom/tsens-v1.c | 196 ++++++++++++++++++++++++++++
drivers/thermal/qcom/tsens.c | 3 +
drivers/thermal/qcom/tsens.h | 3 +-
5 files changed, 203 insertions(+), 3 deletions(-)
create mode 100644 drivers/thermal/qcom/tsens-v1.c
diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
index a821929ede0b..60269ee90c43 100644
--- a/drivers/thermal/qcom/Makefile
+++ b/drivers/thermal/qcom/Makefile
@@ -1,2 +1,2 @@
obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
-qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o
+qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o tsens-v1.o
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 3be4be2e0465..98f77401bc12 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -76,7 +76,7 @@ void compute_intercept_slope(struct tsens_device *tmdev, u32 *p1,
}
}
-static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
+int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
{
int degc, num, den;
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
new file mode 100644
index 000000000000..1dbf4fde6da8
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
+
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include "tsens.h"
+
+/* eeprom layout data for qcs404 (v1) */
+#define BASE0_MASK 0x000007f8
+#define BASE1_MASK 0x0007f800
+#define BASE0_SHIFT 3
+#define BASE1_SHIFT 11
+
+#define S0_P1_MASK 0x0000003f
+#define S1_P1_MASK 0x0003f000
+#define S2_P1_MASK 0x3f000000
+#define S3_P1_MASK 0x000003f0
+#define S4_P1_MASK 0x003f0000
+#define S5_P1_MASK 0x0000003f
+#define S6_P1_MASK 0x0003f000
+#define S7_P1_MASK 0x3f000000
+#define S8_P1_MASK 0x000003f0
+#define S9_P1_MASK 0x003f0000
+
+#define S0_P2_MASK 0x00000fc0
+#define S1_P2_MASK 0x00fc0000
+#define S2_P2_MASK_1_0 0xc0000000
+#define S2_P2_MASK_5_2 0x0000000f
+#define S3_P2_MASK 0x0000fc00
+#define S4_P2_MASK 0x0fc00000
+#define S5_P2_MASK 0x00000fc0
+#define S6_P2_MASK 0x00fc0000
+#define S7_P2_MASK_1_0 0xc0000000
+#define S7_P2_MASK_5_2 0x0000000f
+#define S8_P2_MASK 0x0000fc00
+#define S9_P2_MASK 0x0fc00000
+
+#define S0_P1_SHIFT 0
+#define S0_P2_SHIFT 6
+#define S1_P1_SHIFT 12
+#define S1_P2_SHIFT 18
+#define S2_P1_SHIFT 24
+#define S2_P2_SHIFT_1_0 30
+
+#define S2_P2_SHIFT_5_2 0
+#define S3_P1_SHIFT 4
+#define S3_P2_SHIFT 10
+#define S4_P1_SHIFT 16
+#define S4_P2_SHIFT 22
+
+#define S5_P1_SHIFT 0
+#define S5_P2_SHIFT 6
+#define S6_P1_SHIFT 12
+#define S6_P2_SHIFT 18
+#define S7_P1_SHIFT 24
+#define S7_P2_SHIFT_1_0 30
+
+#define S7_P2_SHIFT_5_2 0
+#define S8_P1_SHIFT 4
+#define S8_P2_SHIFT 10
+#define S9_P1_SHIFT 16
+#define S9_P2_SHIFT 22
+
+#define CAL_SEL_MASK 7
+#define CAL_SEL_SHIFT 0
+
+static int calibrate_v1(struct tsens_device *tmdev)
+{
+ u32 base0 = 0, base1 = 0;
+ u32 p1[10], p2[10];
+ u32 mode = 0, lsb = 0, msb = 0;
+ u32 *qfprom_cdata;
+ int i;
+
+ qfprom_cdata = (u32 *)qfprom_read(tmdev->dev, "calib");
+ if (IS_ERR(qfprom_cdata))
+ return PTR_ERR(qfprom_cdata);
+
+ mode = (qfprom_cdata[4] & CAL_SEL_MASK) >> CAL_SEL_SHIFT;
+ dev_dbg(tmdev->dev, "calibration mode is %d\n", mode);
+
+ switch (mode) {
+ case TWO_PT_CALIB:
+ base1 = (qfprom_cdata[4] & BASE1_MASK) >> BASE1_SHIFT;
+ p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT;
+ p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT;
+ /* This value is split over two registers, 2 bits and 4 bits */
+ lsb = (qfprom_cdata[0] & S2_P2_MASK_1_0) >> S2_P2_SHIFT_1_0;
+ msb = (qfprom_cdata[1] & S2_P2_MASK_5_2) >> S2_P2_SHIFT_5_2;
+ p2[2] = msb << 2 | lsb;
+ p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT;
+ p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT;
+ p2[5] = (qfprom_cdata[2] & S5_P2_MASK) >> S5_P2_SHIFT;
+ p2[6] = (qfprom_cdata[2] & S6_P2_MASK) >> S6_P2_SHIFT;
+ /* This value is split over two registers, 2 bits and 4 bits */
+ lsb = (qfprom_cdata[2] & S7_P2_MASK_1_0) >> S7_P2_SHIFT_1_0;
+ msb = (qfprom_cdata[3] & S7_P2_MASK_5_2) >> S7_P2_SHIFT_5_2;
+ p2[7] = msb << 2 | lsb;
+ p2[8] = (qfprom_cdata[3] & S8_P2_MASK) >> S8_P2_SHIFT;
+ p2[9] = (qfprom_cdata[3] & S9_P2_MASK) >> S9_P2_SHIFT;
+ for (i = 0; i < tmdev->num_sensors; i++)
+ p2[i] = ((base1 + p2[i]) << 2);
+ /* Fall through */
+ case ONE_PT_CALIB2:
+ base0 = (qfprom_cdata[4] & BASE0_MASK) >> BASE0_SHIFT;
+ p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT;
+ p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT;
+ p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT;
+ p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT;
+ p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT;
+ p1[5] = (qfprom_cdata[2] & S5_P1_MASK) >> S5_P1_SHIFT;
+ p1[6] = (qfprom_cdata[2] & S6_P1_MASK) >> S6_P1_SHIFT;
+ p1[7] = (qfprom_cdata[2] & S7_P1_MASK) >> S7_P1_SHIFT;
+ p1[8] = (qfprom_cdata[3] & S8_P1_MASK) >> S8_P1_SHIFT;
+ p1[9] = (qfprom_cdata[3] & S9_P1_MASK) >> S9_P1_SHIFT;
+ for (i = 0; i < tmdev->num_sensors; i++)
+ p1[i] = (((base0) + p1[i]) << 2);
+ break;
+ default:
+ for (i = 0; i < tmdev->num_sensors; i++) {
+ p1[i] = 500;
+ p2[i] = 780;
+ }
+ break;
+ }
+
+ compute_intercept_slope(tmdev, p1, p2, mode);
+
+ return 0;
+}
+
+#define STATUS_OFFSET 0x44
+#define LAST_TEMP_MASK 0x3ff
+#define STATUS_VALID_BIT BIT(14)
+
+static int get_temp_tsens_v1(struct tsens_device *tmdev, int id, int *temp)
+{
+ struct tsens_sensor *s = &tmdev->sensor[id];
+ u32 code;
+ unsigned int status_reg;
+ u32 last_temp = 0, last_temp2 = 0, last_temp3 = 0;
+ int ret;
+
+ status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * 4;
+ ret = regmap_read(tmdev->tm_map, status_reg, &code);
+ if (ret)
+ return ret;
+ last_temp = code & LAST_TEMP_MASK;
+ if (code & STATUS_VALID_BIT)
+ goto done;
+
+ /* Try a second time */
+ ret = regmap_read(tmdev->tm_map, status_reg, &code);
+ if (ret)
+ return ret;
+ if (code & STATUS_VALID_BIT) {
+ last_temp = code & LAST_TEMP_MASK;
+ goto done;
+ } else {
+ last_temp2 = code & LAST_TEMP_MASK;
+ }
+
+ /* Try a third/last time */
+ ret = regmap_read(tmdev->tm_map, status_reg, &code);
+ if (ret)
+ return ret;
+ if (code & STATUS_VALID_BIT) {
+ last_temp = code & LAST_TEMP_MASK;
+ goto done;
+ } else {
+ last_temp3 = code & LAST_TEMP_MASK;
+ }
+
+ if (last_temp == last_temp2)
+ last_temp = last_temp2;
+ else if (last_temp2 == last_temp3)
+ last_temp = last_temp3;
+done:
+ /* Convert temperature from ADC code to milliCelsius */
+ *temp = code_to_degc(last_temp, s) * 1000;
+
+ return 0;
+}
+
+static const struct tsens_ops ops_generic_v1 = {
+ .init = init_common,
+ .calibrate = calibrate_v1,
+ .get_temp = get_temp_tsens_v1,
+};
+
+const struct tsens_data data_tsens_v1 = {
+ .ops = &ops_generic_v1,
+ .reg_offsets = { [SROT_CTRL_OFFSET] = 0x4 },
+};
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index f1ec9bbe4717..d0cc0c09894a 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -63,6 +63,9 @@ static const struct of_device_id tsens_table[] = {
}, {
.compatible = "qcom,msm8996-tsens",
.data = &data_8996,
+ }, {
+ .compatible = "qcom,tsens-v1",
+ .data = &data_tsens_v1,
}, {
.compatible = "qcom,tsens-v2",
.data = &data_tsens_v2,
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 7b7feee5dc46..f8dc96c42b94 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -90,9 +90,10 @@ char *qfprom_read(struct device *, const char *);
void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
int init_common(struct tsens_device *);
int get_temp_common(struct tsens_device *, int, int *);
+int code_to_degc(u32 adc_code, const struct tsens_sensor *s);
/* TSENS v1 targets */
-extern const struct tsens_data data_8916, data_8974, data_8960;
+extern const struct tsens_data data_8916, data_8974, data_8960, data_tsens_v1;
/* TSENS v2 targets */
extern const struct tsens_data data_8996, data_tsens_v2;
--
2.17.1
Powered by blists - more mailing lists