| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20181128100857.1181263d@karo-electronics.de>
Date: Wed, 28 Nov 2018 10:08:57 +0100
From: Lothar Waßmann <LW@...O-electronics.de>
To: Anson Huang <anson.huang@....com>
Cc: "rui.zhang@...el.com" <rui.zhang@...el.com>,
"edubezval@...il.com" <edubezval@...il.com>,
"daniel.lezcano@...aro.org" <daniel.lezcano@...aro.org>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"catalin.marinas@....com" <catalin.marinas@....com>,
"will.deacon@....com" <will.deacon@....com>,
Aisheng DONG <aisheng.dong@....com>,
Andy Gross <andy.gross@...aro.org>,
"heiko@...ech.de" <heiko@...ech.de>,
"horms+renesas@...ge.net.au" <horms+renesas@...ge.net.au>,
"arnd@...db.de" <arnd@...db.de>,
"amit.kucheria@...aro.org" <amit.kucheria@...aro.org>,
"enric.balletbo@...labora.com" <enric.balletbo@...labora.com>,
"ezequiel@...labora.com" <ezequiel@...labora.com>,
"olof@...om.net" <olof@...om.net>,
"bjorn.andersson@...aro.org" <bjorn.andersson@...aro.org>,
"linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
dl-linux-imx <linux-imx@....com>
Subject: Re: [PATCH V2 2/4] thermal: imx_sc: add i.MX system controller
thermal support
Hi,
On Wed, 28 Nov 2018 05:58:22 +0000 Anson Huang wrote:
> i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller
> inside, the system controller is in charge of controlling power,
> clock and thermal sensors etc..
>
> This patch adds i.MX system controller thermal driver support,
> Linux kernel has to communicate with system controller via MU
> (message unit) IPC to get each thermal sensor's temperature,
> it supports multiple sensors which are passed from device tree,
> please see the binding doc for details.
>
> Signed-off-by: Anson Huang <Anson.Huang@....com>
> ---
> changes since V1:
> remove boiler plate license text;
> remove unnecessary kfree during probe;
> remove build warning of comparing unsigned int with < 0;
> drivers/thermal/Kconfig | 11 +++
> drivers/thermal/Makefile | 1 +
> drivers/thermal/imx_sc_thermal.c | 201 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 213 insertions(+)
> create mode 100644 drivers/thermal/imx_sc_thermal.c
>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 0e69edc..84e850c 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -222,6 +222,17 @@ config IMX_THERMAL
> cpufreq is used as the cooling device to throttle CPUs when the
> passive trip is crossed.
>
> +config IMX_SC_THERMAL
> + tristate "Temperature sensor driver for NXP i.MX SoCs with System Controller"
> + depends on ARCH_MXC || COMPILE_TEST
> + depends on OF
> + help
> + Support for Temperature Monitor (TEMPMON) found on NXP i.MX SoCs with
> + system controller inside, Linux kernel has to communicate with system
> + controller via MU (message unit) IPC to get temperature from thermal
> + sensor. It supports one critical trip point and one
> + passive trip point for each thermal sensor.
> +
> config MAX77620_THERMAL
> tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
> depends on MFD_MAX77620
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 610344e..1b13f6a 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -41,6 +41,7 @@ obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
> obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
> obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o
> obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
> +obj-$(CONFIG_IMX_SC_THERMAL) += imx_sc_thermal.o
> obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o
> obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o
> obj-$(CONFIG_DA9062_THERMAL) += da9062-thermal.o
> diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
> new file mode 100644
> index 0000000..890537f
> --- /dev/null
> +++ b/drivers/thermal/imx_sc_thermal.c
> @@ -0,0 +1,201 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2018 NXP.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/firmware/imx/sci.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/thermal.h>
> +
> +#include "thermal_core.h"
> +
> +#define IMX_SC_MISC_FUNC_GET_TEMP 13
> +#define IMX_SC_C_TEMP 0
> +
> +struct imx_sc_ipc *thermal_ipc_handle;
> +
static?
> +struct imx_sc_sensor {
> + struct thermal_zone_device *tzd;
> + u32 resource_id;
> +};
> +
> +struct imx_sc_thermal_data {
> + struct imx_sc_sensor *sensor;
> +};
> +
> +struct imx_sc_msg_req_misc_get_temp {
> + struct imx_sc_rpc_msg hdr;
> + u16 resource_id;
> + u8 type;
> +} __packed;
> +
> +struct imx_sc_msg_resp_misc_get_temp {
> + struct imx_sc_rpc_msg hdr;
> + u16 celsius;
> + u8 tenths;
> +} __packed;
> +
> +static int imx_sc_thermal_get_temp(void *data, int *temp)
> +{
> + struct imx_sc_msg_resp_misc_get_temp *resp;
> + struct imx_sc_msg_req_misc_get_temp msg;
> + struct imx_sc_rpc_msg *hdr = &msg.hdr;
> + struct imx_sc_sensor *sensor = data;
> + int ret;
> +
> + msg.resource_id = sensor->resource_id;
> + msg.type = IMX_SC_C_TEMP;
> +
> + hdr->ver = IMX_SC_RPC_VERSION;
> + hdr->svc = IMX_SC_RPC_SVC_MISC;
> + hdr->func = IMX_SC_MISC_FUNC_GET_TEMP;
> + hdr->size = 2;
> +
> + ret = imx_scu_call_rpc(thermal_ipc_handle, &msg, true);
> + if (ret) {
> + pr_err("read temp sensor %d failed, ret %d\n",
> + sensor->resource_id, ret);
> + return ret;
> + }
> +
> + resp = (struct imx_sc_msg_resp_misc_get_temp *)&msg;
> + *temp = resp->celsius * 1000 + resp->tenths * 100;
> +
> + return 0;
> +}
> +
> +static const struct thermal_zone_of_device_ops imx_sc_thermal_ops = {
> + .get_temp = imx_sc_thermal_get_temp,
> +};
> +
> +static int imx_sc_thermal_register_sensor(struct platform_device *pdev,
> + struct imx_sc_sensor *sensor)
> +{
> + struct thermal_zone_device *tzd;
> +
> + tzd = devm_thermal_zone_of_sensor_register(&pdev->dev,
> + sensor->resource_id,
> + sensor,
> + &imx_sc_thermal_ops);
> + if (IS_ERR(tzd)) {
> + dev_err(&pdev->dev, "failed to register sensor: %d\n",
> + sensor->resource_id);
> + return -EINVAL;
return PTR_ERR(tzd)?
> + }
> +
> + sensor->tzd = tzd;
> +
> + return 0;
> +}
> +
> +static int imx_sc_thermal_get_sensor_id(struct device_node *sensor_np, u32 *id)
> +{
> + struct of_phandle_args sensor_specs;
> + int ret;
> +
> + ret = of_parse_phandle_with_args(sensor_np, "thermal-sensors",
> + "#thermal-sensor-cells",
> + 0, &sensor_specs);
> + if (ret)
> + return ret;
> +
> + if (sensor_specs.args_count >= 1) {
> + *id = sensor_specs.args[0];
> + WARN(sensor_specs.args_count > 1,
> + "%pOFn: too many cells in sensor specifier %d\n",
> + sensor_specs.np, sensor_specs.args_count);
> + } else {
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int imx_sc_thermal_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct device_node *sensor_np = NULL;
> + struct imx_sc_thermal_data *data;
> + struct imx_sc_sensor *sensors;
> + u32 sensor_num;
> + int ret, i;
> +
> + ret = imx_scu_get_handle(&thermal_ipc_handle);
> + if (ret) {
> + if (ret == -EPROBE_DEFER)
> + return ret;
> +
> + dev_err(&pdev->dev, "failed to get ipc handle: %d!\n", ret);
> + return ret;
> + }
> +
> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + ret = of_property_read_u32(np, "tsens-num", &sensor_num);
> + if (ret || !sensor_num) {
> + dev_err(&pdev->dev, "failed to get valid temp sensor number!\n");
> + return -EINVAL;
> + }
> +
> + sensors = devm_kzalloc(&pdev->dev, sizeof(*data->sensor) * sensor_num,
> + GFP_KERNEL);
> + if (!sensors)
> + return -ENOMEM;
> +
> + data->sensor = sensors;
> +
> + np = of_find_node_by_name(NULL, "thermal-zones");
> + if (!np)
> + return -ENODEV;
> +
> + for (i = 0; i < sensor_num; i++) {
> + struct imx_sc_sensor *sensor = &data->sensor[i];
> +
> + sensor_np = of_get_next_child(np, sensor_np);
> + ret = imx_sc_thermal_get_sensor_id(sensor_np, &sensor->resource_id);
> + if (ret < 0) {
> + dev_err(&pdev->dev,
> + "failed to get valid sensor resource id: %d\n",
> + ret);
> + break;
> + }
> +
> + ret = imx_sc_thermal_register_sensor(pdev, sensor);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to register thermal sensor: %d\n",
> + ret);
> + break;
> + }
> + }
> +
> + of_node_put(np);
> + of_node_put(sensor_np);
> +
> + return ret;
> +}
> +
> +static const struct of_device_id imx_sc_thermal_table[] = {
> + { .compatible = "nxp,imx8qxp-sc-thermal", },
> + {},
> +};
s/{},/{}/
Lothar Waßmann
Powered by blists - more mailing lists