| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 28 Nov 2018 15:44:58 +0000
From: Aisheng DONG <aisheng.dong@....com>
To: Anson Huang <anson.huang@....com>,
"a.zummo@...ertech.it" <a.zummo@...ertech.it>,
"alexandre.belloni@...tlin.com" <alexandre.belloni@...tlin.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"catalin.marinas@....com" <catalin.marinas@....com>,
"will.deacon@....com" <will.deacon@....com>,
Andy Gross <andy.gross@...aro.org>,
"arnd@...db.de" <arnd@...db.de>,
"horms+renesas@...ge.net.au" <horms+renesas@...ge.net.au>,
"heiko@...ech.de" <heiko@...ech.de>,
"bjorn.andersson@...aro.org" <bjorn.andersson@...aro.org>,
"enric.balletbo@...labora.com" <enric.balletbo@...labora.com>,
"amit.kucheria@...aro.org" <amit.kucheria@...aro.org>,
"ezequiel@...labora.com" <ezequiel@...labora.com>,
"olof@...om.net" <olof@...om.net>,
"LW@...O-electronics.de" <LW@...O-electronics.de>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"linux-rtc@...r.kernel.org" <linux-rtc@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
CC: dl-linux-imx <linux-imx@....com>
Subject: RE: [PATCH V3 2/4] rtc: add i.MX system controller RTC support
> -----Original Message-----
> From: Anson Huang
> Sent: Wednesday, November 28, 2018 5:57 PM
[...]
> Subject: [PATCH V3 2/4] rtc: add i.MX system controller RTC support
>
> i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller inside,
> the system controller is in charge of controlling power, clock and secure rtc
> etc..
>
> This patch adds i.MX system controller RTC driver support, Linux kernel has to
> communicate with system controller via MU (message unit) IPC to set/get RTC
> time and other alarm functions, since the RTC set time needs to be done in
> secure EL3 mode (required by system controller firmware) and alarm functions
> needs to be done with general MU IRQ handle, these depend on other
> components which are NOT ready, so this patch ONLY enables the RTC time
> read.
>
> Signed-off-by: Anson Huang <Anson.Huang@....com>
> ---
> changes since V2:
> - make rtc_ipc_handle/imx_sc_rtc static;
> - remove comma in last entry of imx_sc_dt_ids;
> - rename rtc_device.
> drivers/rtc/Kconfig | 6 +++
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-imx-sc.c | 107
This change log format seems strange.
> +++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 114 insertions(+)
> create mode 100644 drivers/rtc/rtc-imx-sc.c
>
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index a819ef0..3b9642e
> 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -1677,6 +1677,12 @@ config RTC_DRV_SNVS
> This driver can also be built as a module, if so, the module
> will be called "rtc-snvs".
>
> +config RTC_DRV_IMX_SC
> + tristate "NXP i.MX System Controller RTC support"
> + help
> + If you say yes here you get support for the NXP i.MX System
> + Controller RTC module.
> +
> config RTC_DRV_SIRFSOC
> tristate "SiRFSOC RTC"
> depends on ARCH_SIRF
> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 290c173..f97c05e
> 100644
> --- a/drivers/rtc/Makefile
> +++ b/drivers/rtc/Makefile
> @@ -75,6 +75,7 @@ obj-$(CONFIG_RTC_DRV_GOLDFISH) += rtc-goldfish.o
> obj-$(CONFIG_RTC_DRV_HID_SENSOR_TIME) += rtc-hid-sensor-time.o
> obj-$(CONFIG_RTC_DRV_HYM8563) += rtc-hym8563.o
> obj-$(CONFIG_RTC_DRV_IMXDI) += rtc-imxdi.o
> +obj-$(CONFIG_RTC_DRV_IMX_SC) += rtc-imx-sc.o
> obj-$(CONFIG_RTC_DRV_ISL12022) += rtc-isl12022.o
> obj-$(CONFIG_RTC_DRV_ISL12026) += rtc-isl12026.o
> obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
> diff --git a/drivers/rtc/rtc-imx-sc.c b/drivers/rtc/rtc-imx-sc.c new file mode
> 100644 index 0000000..b8e331e
> --- /dev/null
> +++ b/drivers/rtc/rtc-imx-sc.c
> @@ -0,0 +1,107 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2018 NXP.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
Do we need them all?
> +#include <linux/firmware/imx/sci.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/rtc.h>
> +
> +#define IMX_SC_TIMER_FUNC_GET_RTC_SEC1970 9
> +#define IMX_SC_TIMER_FUNC_SET_RTC_TIME 6
> +
> +static struct imx_sc_ipc *rtc_ipc_handle; static struct rtc_device
> +*imx_sc_rtc;
> +
> +struct imx_sc_msg_req_timer_get_rtc_time {
> + struct imx_sc_rpc_msg hdr;
> +} __packed;
> +
> +struct imx_sc_msg_resp_timer_get_rtc_time {
> + struct imx_sc_rpc_msg hdr;
> + u32 time;
> +} __packed;
> +
> +static int imx_sc_rtc_read_time(struct device *dev, struct rtc_time
> +*tm) {
> + struct imx_sc_msg_resp_timer_get_rtc_time *resp;
> + struct imx_sc_msg_req_timer_get_rtc_time msg;
> + struct imx_sc_rpc_msg *hdr = &msg.hdr;
> + int ret;
> +
> + hdr->ver = IMX_SC_RPC_VERSION;
> + hdr->svc = IMX_SC_RPC_SVC_TIMER;
> + hdr->func = IMX_SC_TIMER_FUNC_GET_RTC_SEC1970;
> + hdr->size = 1;
> +
> + ret = imx_scu_call_rpc(rtc_ipc_handle, &msg, true);
> + if (ret) {
> + pr_err("read rtc time failed, ret %d\n", ret);
> + return ret;
> + }
> +
> + resp = (struct imx_sc_msg_resp_timer_get_rtc_time *)&msg;
This is wrong and may result in memory corruption.
Please refer to how the scu-clk driver does.
Regards
Dong Aisheng
> + rtc_time_to_tm(resp->time, tm);
> +
> + return 0;
> +}
> +
> +static const struct rtc_class_ops imx_sc_rtc_ops = {
> + .read_time = imx_sc_rtc_read_time,
> +};
> +
> +static int imx_sc_rtc_probe(struct platform_device *pdev) {
> + int ret;
> +
> + ret = imx_scu_get_handle(&rtc_ipc_handle);
> + if (ret) {
> + if (ret == -EPROBE_DEFER)
> + return ret;
> +
> + dev_err(&pdev->dev, "failed to get ipc handle: %d!\n", ret);
> + return ret;
> + }
> +
> + imx_sc_rtc = devm_rtc_allocate_device(&pdev->dev);
> + if (IS_ERR(imx_sc_rtc)) {
> + ret = PTR_ERR(imx_sc_rtc);
> + return ret;
> + }
> +
> + imx_sc_rtc->ops = &imx_sc_rtc_ops;
> + imx_sc_rtc->range_min = 0;
> + imx_sc_rtc->range_max = U32_MAX;
> +
> + ret = rtc_register_device(imx_sc_rtc);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to register rtc: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id imx_sc_dt_ids[] = {
> + { .compatible = "nxp,imx8qxp-sc-rtc", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, imx_sc_dt_ids);
> +
> +static struct platform_driver imx_sc_rtc_driver = {
> + .driver = {
> + .name = "imx-sc-rtc",
> + .of_match_table = imx_sc_dt_ids,
> + },
> + .probe = imx_sc_rtc_probe,
> +};
> +module_platform_driver(imx_sc_rtc_driver);
> +
> +MODULE_AUTHOR("Anson Huang <Anson.Huang@....com>");
> +MODULE_DESCRIPTION("NXP i.MX System Controller RTC Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.7.4
Powered by blists - more mailing lists