linux-kernel - Re: Regression: v4.20-rc4: "SMSC LAN8710/LAN8720: Master/Slave resolution failed"

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20181129163936.GE1501@lunn.ch>
Date:   Thu, 29 Nov 2018 17:39:36 +0100
From:   Andrew Lunn <andrew@...n.ch>
To:     jacopo mondi <jacopo@...ndi.org>
Cc:     f.fainelli@...il.com, davem@...emloft.net, shawnguo@...nel.org,
        s.hauer@...gutronix.de, fabio.estevam@....com,
        netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Subject: Re: Regression: v4.20-rc4: "SMSC LAN8710/LAN8720: Master/Slave
 resolution failed"

On Thu, Nov 29, 2018 at 03:42:06PM +0100, jacopo mondi wrote:
> Hello,
>    netdev people,
>    i.MX6 people,
> 
>    I'm running an i.MX6Q system, and since v4.20-rc1 the ethernet PHY
> fails to properly startup, preventing me from mounting my NFS rootfs
> (the interfaces gets configured after some minutes, but it's too late
> for NFS).
> 
> The complete boot log:
> 
> [    3.000186] SMSC LAN8710/LAN8720 2188000.ethernet-1:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet-1:00, irq=POLL)
> [    3.015616] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [    4.090582] SMSC LAN8710/LAN8720 2188000.ethernet-1:00: Master/Slave resolution failed, maybe conflicting manual settings?

Thanks for reporting this.

I made some changes in link mode handling. Let me check the code i modified.

  Andrew