| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAEFO=4AQe0B0inmE=w2T+xaFkKgPwnHLP7XkT30TjFV_AEKGbg@mail.gmail.com>
Date: Thu, 29 Nov 2018 11:02:46 -0200
From: Giuliano Augusto Faulin Belinassi <giuliano.belinassi@....br>
To: StefanSerban.Popa@...log.com
Cc: alexandru.Ardelean@...log.com, lars@...afoo.de, knaack.h@....de,
jic23@...nel.org, Michael.Hennerich@...log.com,
Renato Geh <renatogeh@...il.com>, giuliano.belinassi@...il.com,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
gregkh@...uxfoundation.org, linux-kernel@...r.kernel.org,
linux-iio@...r.kernel.org, devel@...verdev.osuosl.org,
kernel-usp@...glegroups.com
Subject: Re: [PATCH 1/2] staging: iio: ad7780: Add gain & filter gpio support
Hi
On Thu, Nov 29, 2018 at 9:18 AM Popa, Stefan Serban
<StefanSerban.Popa@...log.com> wrote:
>
> On Mi, 2018-11-28 at 16:15 -0200, Giuliano Belinassi wrote:
> > Previously, the AD7780 driver only supported gpio for the 'powerdown'
> > pin. This commit adds suppport for the 'gain' and 'filter' pin.
> >
> > Signed-off-by: Giuliano Belinassi <giuliano.belinassi@....br>
> > ---
> > Changes in v2:
> > - Now this patch is part of the patchset that aims to remove ad7780
> > out of staging. https://marc.info/?l=linux-iio&m=154282349808890&w=2
> > - Also, now it reads voltage and filter values from the userspace
> > instead of gpio pin states.
>
> Hello,
> Please see bellow.
>
> >
> > drivers/staging/iio/adc/ad7780.c | 78 ++++++++++++++++++++++++--
> > include/linux/iio/adc/ad_sigma_delta.h | 5 ++
> > 2 files changed, 79 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/staging/iio/adc/ad7780.c
> > b/drivers/staging/iio/adc/ad7780.c
> > index c4a85789c2db..05979a79fda3 100644
> > --- a/drivers/staging/iio/adc/ad7780.c
> > +++ b/drivers/staging/iio/adc/ad7780.c
> > @@ -39,6 +39,12 @@
> > #define AD7170_PATTERN (AD7780_PAT0 | AD7170_PAT2)
> > #define AD7170_PATTERN_MASK (AD7780_PAT0 | AD7780_PAT1 |
> > AD7170_PAT2)
> >
> > +#define AD7780_GAIN_GPIO 0
> > +#define AD7780_FILTER_GPIO 1
> > +
> > +#define AD7780_GAIN_MIDPOINT 64
> > +#define AD7780_FILTER_MIDPOINT 13350
> > +
> > struct ad7780_chip_info {
> > struct iio_chan_spec channel;
> > unsigned int pattern_mask;
> > @@ -50,6 +56,8 @@ struct ad7780_state {
> > const struct ad7780_chip_info *chip_info;
> > struct regulator *reg;
> > struct gpio_desc *powerdown_gpio;
> > + struct gpio_desc *gain_gpio;
> > + struct gpio_desc *filter_gpio;
> > unsigned int gain;
> >
> > struct ad_sigma_delta sd;
> > @@ -115,18 +123,65 @@ static int ad7780_read_raw(struct iio_dev
> > *indio_dev,
> > return -EINVAL;
> > }
> >
> > +static int ad7780_write_raw(struct iio_dev *indio_dev,
> > + struct iio_chan_spec const *chan,
> > + int val,
> > + int val2,
> > + long m)
> > +{
> > + struct ad7780_state *st = iio_priv(indio_dev);
> > + const struct ad7780_chip_info *chip_info = st->chip_info;
> > + int uvref, gain;
> > + unsigned int full_scale;
> > +
> > + if (!chip_info->is_ad778x)
> > + return 0;
> > +
> > + switch (m) {
> > + case IIO_CHAN_INFO_SCALE:
> > + if (val != 0)
> > + return -EINVAL;
> > +
> > + uvref = regulator_get_voltage(st->reg);
>
> regulator_get_voltage() has already been called in the probe function and
> the result is stored in st->int_vref_mv.
This was removed in commit 9eae69ddbc4717a0bd702eddac76c7848773bf71
because the value was not being updated. But I agree if the vref
voltage is not going to change at all after the initialization, then
this value should be kept in memory.
> My suggestion would be to use a local vref variable declared as unsigned
> int. It is my fault that I haven't explained correctly in the previous
> email, but you need to multiply vref_mv with 1000000LL in order to get the
> right precision: vref = st->int_vref_mv * 1000000LL. Afterwards you will be
> able to perform the divisions.
Thanks for this info! :-)
Shouldn't we store this in uV (microVolts)? This will yield a more
accurate result after the multiplication.
> > +
> > + if (uvref < 0)
> > + return uvref;
> > +
> > + full_scale = 1 << (chip_info->channel.scan_type.realbits
> > - 1);
> > + gain = DIV_ROUND_CLOSEST(uvref, full_scale);
> > + gain = DIV_ROUND_CLOSEST(gain, val2);
> > +
> > + gpiod_set_value(st->gain_gpio, gain <
> > AD7780_GAIN_MIDPOINT ? 0 : 1);
>
> Once the gain is set, you can store it in st->gain variable.
Yes, we forgot it.
>
> > + case IIO_CHAN_INFO_SAMP_FREQ:
> > + if (val2 != 0)
> > + return -EINVAL;
> > +
> > + gpiod_set_value(st->filter_gpio, val <
> > AD7780_FILTER_MIDPOINT ? 0 : 1);
>
> This is probably fine, although I am not a big fan of the ternary operator.
> A simple if else statement would do. However, I don't feel strongly about
> it, so feel free to disagree.
>
> > + break;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static int ad7780_postprocess_sample(struct ad_sigma_delta *sigma_delta,
> > unsigned int raw_sample)
> > {
> > struct ad7780_state *st = ad_sigma_delta_to_ad7780(sigma_delta);
> > const struct ad7780_chip_info *chip_info = st->chip_info;
> > + int val;
> >
> > if ((raw_sample & AD7780_ERR) ||
> > ((raw_sample & chip_info->pattern_mask) != chip_info-
> > >pattern))
> > return -EIO;
> >
> > if (chip_info->is_ad778x) {
> > - if (raw_sample & AD7780_GAIN)
> > + val = raw_sample & AD7780_GAIN;
> > +
> > + if (val != gpiod_get_value(st->gain_gpio))
> > + return -EIO;
>
> It is not obvious to me what is the point of this check. Maybe you can add
> a comment?
It seems to be a redundancy check. It is getting the 32-bits
raw_output, getting the bit that represents the GAIN value and
checking if the pin is set accordingly (see Figure 22 of datasheet,
page 13). Is this correct? If yes we add a comment explaining this.
>
> > +
> > + if (val)
> > st->gain = 1;
> > else
> > st->gain = 128;
>
> Do we still need this? I am not convinced.
No, I don't think so. Thanks for pointing this out :-)
>
> > @@ -141,18 +196,20 @@ static const struct ad_sigma_delta_info
> > ad7780_sigma_delta_info = {
> > .has_registers = false,
> > };
> >
> > -#define AD7780_CHANNEL(bits, wordsize) \
> > +#define AD7170_CHANNEL(bits, wordsize) \
> > AD_SD_CHANNEL_NO_SAMP_FREQ(1, 0, 0, bits, 32, wordsize - bits)
> > +#define AD7780_CHANNEL(bits, wordsize) \
> > + AD_SD_CHANNEL_GAIN_FILTER(1, 0, 0, bits, 32, wordsize - bits)
> >
> > static const struct ad7780_chip_info ad7780_chip_info_tbl[] = {
> > [ID_AD7170] = {
> > - .channel = AD7780_CHANNEL(12, 24),
> > + .channel = AD7170_CHANNEL(12, 24),
> > .pattern = AD7170_PATTERN,
> > .pattern_mask = AD7170_PATTERN_MASK,
> > .is_ad778x = false,
> > },
> > [ID_AD7171] = {
> > - .channel = AD7780_CHANNEL(16, 24),
> > + .channel = AD7170_CHANNEL(16, 24),
> > .pattern = AD7170_PATTERN,
> > .pattern_mask = AD7170_PATTERN_MASK,
> > .is_ad778x = false,
> > @@ -173,6 +230,7 @@ static const struct ad7780_chip_info
> > ad7780_chip_info_tbl[] = {
> >
> > static const struct iio_info ad7780_info = {
> > .read_raw = ad7780_read_raw,
> > + .write_raw = ad7780_write_raw,
> > };
> >
> > static int ad7780_probe(struct spi_device *spi)
> > @@ -222,6 +280,18 @@ static int ad7780_probe(struct spi_device *spi)
> > goto error_disable_reg;
> > }
> >
> > + if (st->chip_info->is_ad778x) {
> > + st->gain_gpio = devm_gpiod_get_optional(&spi->dev,
> > + "gain",
> > + GPIOD_OUT_HIGH);
> > + if (IS_ERR(st->gain_gpio)) {
>
> if the GPIO is optional, then we should continue in case of -ENODEV.
>
> Shouldn't we have a devm_gpiod_get_optional() call also for filter_gpio?
>
> > + ret = PTR_ERR(st->gain_gpio);
> > + dev_err(&spi->dev, "Failed to request gain GPIO:
> > %d\n",
> > + ret);
> > + goto error_disable_reg;
> > + }
> > + }
> > +
> > ret = ad_sd_setup_buffer_and_trigger(indio_dev);
> > if (ret)
> > goto error_disable_reg;
> > diff --git a/include/linux/iio/adc/ad_sigma_delta.h
> > b/include/linux/iio/adc/ad_sigma_delta.h
> > index 730ead1a46df..6cadab6fd5fd 100644
> > --- a/include/linux/iio/adc/ad_sigma_delta.h
> > +++ b/include/linux/iio/adc/ad_sigma_delta.h
> > @@ -173,6 +173,11 @@ int ad_sd_validate_trigger(struct iio_dev
> > *indio_dev, struct iio_trigger *trig);
> > __AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \
> > _storagebits, _shift, NULL, IIO_VOLTAGE, 0)
> >
> > +#define AD_SD_CHANNEL_GAIN_FILTER(_si, _channel, _address, _bits, \
> > + _storagebits, _shift) \
> > + __AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \
> > + _storagebits, _shift, NULL, IIO_VOLTAGE,
> > BIT(IIO_CHAN_INFO_RAW))
> > +
> > #define AD_SD_TEMP_CHANNEL(_si, _address, _bits, _storagebits, _shift) \
> > __AD_SD_CHANNEL(_si, 0, -1, _address, _bits, \
> > _storagebits, _shift, NULL, IIO_TEMP, \
>
> --
> You received this message because you are subscribed to the Google Groups "Kernel USP" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to kernel-usp+unsubscribe@...glegroups.com.
> To post to this group, send email to kernel-usp@...glegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/kernel-usp/1543490289.11186.22.camel%40analog.com.
> For more options, visit https://groups.google.com/d/optout.
Powered by blists - more mailing lists