| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20181130063122.24217-1-jackychou@asix.com.tw>
Date: Fri, 30 Nov 2018 14:31:21 +0800
From: Jackychou <jackychou@...x.com.tw>
To: johan@...nel.org
Cc: gregkh@...uxfoundation.org, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org, louis@...x.com.tw,
jackychou@...x.com.tw
Subject: [PATCH 1/2 v4] USB: serial: mos7840: Adjust port settings for read and write registers
From: JackyChou <jackychou@...x.com.tw>
In the read/write function, set port 2 independently in the 2-port case.
When setting the offset of port registers, the offset between port 1 and
other ports is different, so port 1 is set independently.
Then in the rest of ports, the port 2 between 2-ports case and 4-ports case
is different, so port 2 in 2-ports case is set independently.
Signed-off-by: JackyChou <jackychou@...x.com.tw>
---
drivers/usb/serial/mos7840.c | 48 ++++++++++++------------------------
1 file changed, 16 insertions(+), 32 deletions(-)
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 88828b4b8c44..92ab68ef08ab 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -298,15 +298,10 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
val = val & 0x00ff;
/* For the UART control registers, the application number need
to be Or'ed */
- if (port->serial->num_ports == 4) {
+ if (port->serial->num_ports == 2 && port->port_number != 0)
+ val |= ((__u16)port->port_number + 2) << 8;
+ else
val |= ((__u16)port->port_number + 1) << 8;
- } else {
- if (port->port_number == 0) {
- val |= ((__u16)port->port_number + 1) << 8;
- } else {
- val |= ((__u16)port->port_number + 2) << 8;
- }
- }
dev_dbg(&port->dev, "%s application number is %x\n", __func__, val);
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
MCS_WR_RTYPE, val, reg, NULL, 0,
@@ -332,15 +327,10 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
return -ENOMEM;
/* Wval is same as application number */
- if (port->serial->num_ports == 4) {
+ if (port->serial->num_ports == 2 && port->port_number != 0)
+ Wval = ((__u16)port->port_number + 2) << 8;
+ else
Wval = ((__u16)port->port_number + 1) << 8;
- } else {
- if (port->port_number == 0) {
- Wval = ((__u16)port->port_number + 1) << 8;
- } else {
- Wval = ((__u16)port->port_number + 2) << 8;
- }
- }
dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval);
ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH,
@@ -2132,22 +2122,16 @@ static int mos7840_port_probe(struct usb_serial_port *port)
mos7840_port->SpRegOffset = 0x0;
mos7840_port->ControlRegOffset = 0x1;
mos7840_port->DcrRegOffset = 0x4;
- } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0x8;
- mos7840_port->ControlRegOffset = 0x9;
- mos7840_port->DcrRegOffset = 0x16;
- } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 2)) {
- mos7840_port->SpRegOffset = 0xa;
- mos7840_port->ControlRegOffset = 0xb;
- mos7840_port->DcrRegOffset = 0x19;
- } else if ((mos7840_port->port_num == 3) && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0xa;
- mos7840_port->ControlRegOffset = 0xb;
- mos7840_port->DcrRegOffset = 0x19;
- } else if ((mos7840_port->port_num == 4) && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0xc;
- mos7840_port->ControlRegOffset = 0xd;
- mos7840_port->DcrRegOffset = 0x1c;
+ } else {
+ u8 port_offset;
+
+ if ((mos7840_port->port_num == 2) && (serial->num_ports == 2))
+ port_offset = 1;
+ else
+ port_offset = mos7840_port->port_num - 2;
+ mos7840_port->SpRegOffset = 0x8 + (2 * port_offset);
+ mos7840_port->ControlRegOffset = 0x9 + (2 * port_offset);
+ mos7840_port->DcrRegOffset = 0x16 + (3 * port_offset);
}
mos7840_dump_serial_port(port, mos7840_port);
mos7840_set_port_private(port, mos7840_port);
--
2.17.1
Powered by blists - more mailing lists