| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1543571742-17995-5-git-send-email-p.paillet@st.com>
Date: Fri, 30 Nov 2018 09:55:50 +0000
From: Pascal PAILLET-LME <p.paillet@...com>
To: "dmitry.torokhov@...il.com" <dmitry.torokhov@...il.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"lee.jones@...aro.org" <lee.jones@...aro.org>,
"lgirdwood@...il.com" <lgirdwood@...il.com>,
"broonie@...nel.org" <broonie@...nel.org>,
"wim@...ux-watchdog.org" <wim@...ux-watchdog.org>,
"linux@...ck-us.net" <linux@...ck-us.net>,
"linux-input@...r.kernel.org" <linux-input@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-watchdog@...r.kernel.org" <linux-watchdog@...r.kernel.org>,
"benjamin.gaignard@...aro.org" <benjamin.gaignard@...aro.org>,
"eballetbo@...il.com" <eballetbo@...il.com>,
"axel.lin@...ics.com" <axel.lin@...ics.com>
CC: Pascal PAILLET-LME <p.paillet@...com>
Subject: [PATCH v7 4/7] input: stpmic1: add stpmic1 onkey driver
The stpmic1 pmic is able to manage an onkey button. This driver exposes
the stpmic1 onkey as an input device. It can also be configured to
shut-down the power supplies on a long key-press with an adjustable
duration.
Signed-off-by: Pascal Paillet <p.paillet@...com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@...il.com>
---
changes in v7: nothing
drivers/input/misc/Kconfig | 11 +++
drivers/input/misc/Makefile | 2 +
drivers/input/misc/stpmic1_onkey.c | 198 +++++++++++++++++++++++++++++++++++++
3 files changed, 211 insertions(+)
create mode 100644 drivers/input/misc/stpmic1_onkey.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index ca59a2b..279fb02 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -851,4 +851,15 @@ config INPUT_SC27XX_VIBRA
To compile this driver as a module, choose M here. The module will
be called sc27xx_vibra.
+config INPUT_STPMIC1_ONKEY
+ tristate "STPMIC1 PMIC Onkey support"
+ depends on MFD_STPMIC1
+ help
+ Say Y to enable support of onkey embedded into STPMIC1 PMIC. onkey
+ can be used to wakeup from low power modes and force a shut-down on
+ long press.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stpmic1_onkey.
+
endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 9d0f9d1..1b44202 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
+obj-$(CONFIG_INPUT_STPMIC1_ONKEY) += stpmic1_onkey.o
obj-$(CONFIG_INPUT_TPS65218_PWRBUTTON) += tps65218-pwrbutton.o
obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
obj-$(CONFIG_INPUT_TWL4030_VIBRA) += twl4030-vibra.o
@@ -81,3 +82,4 @@ obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR) += ideapad_slidebar.o
+
diff --git a/drivers/input/misc/stpmic1_onkey.c b/drivers/input/misc/stpmic1_onkey.c
new file mode 100644
index 0000000..7b49c99
--- /dev/null
+++ b/drivers/input/misc/stpmic1_onkey.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) STMicroelectronics 2018
+// Author: Pascal Paillet <p.paillet@...com> for STMicroelectronics.
+
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/stpmic1.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+/**
+ * struct stpmic1_onkey - OnKey data
+ * @input_dev: pointer to input device
+ * @irq_falling: irq that we are hooked on to
+ * @irq_rising: irq that we are hooked on to
+ */
+struct stpmic1_onkey {
+ struct input_dev *input_dev;
+ int irq_falling;
+ int irq_rising;
+};
+
+static irqreturn_t onkey_falling_irq(int irq, void *ponkey)
+{
+ struct stpmic1_onkey *onkey = ponkey;
+ struct input_dev *input_dev = onkey->input_dev;
+
+ input_report_key(input_dev, KEY_POWER, 1);
+ pm_wakeup_event(input_dev->dev.parent, 0);
+ input_sync(input_dev);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t onkey_rising_irq(int irq, void *ponkey)
+{
+ struct stpmic1_onkey *onkey = ponkey;
+ struct input_dev *input_dev = onkey->input_dev;
+
+ input_report_key(input_dev, KEY_POWER, 0);
+ pm_wakeup_event(input_dev->dev.parent, 0);
+ input_sync(input_dev);
+
+ return IRQ_HANDLED;
+}
+
+static int stpmic1_onkey_probe(struct platform_device *pdev)
+{
+ struct stpmic1 *pmic = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct input_dev *input_dev;
+ struct stpmic1_onkey *onkey;
+ unsigned int val, reg = 0;
+ int error;
+
+ onkey = devm_kzalloc(dev, sizeof(*onkey), GFP_KERNEL);
+ if (!onkey)
+ return -ENOMEM;
+
+ onkey->irq_falling = platform_get_irq_byname(pdev, "onkey-falling");
+ if (onkey->irq_falling < 0) {
+ dev_err(dev, "failed: request IRQ onkey-falling %d\n",
+ onkey->irq_falling);
+ return onkey->irq_falling;
+ }
+
+ onkey->irq_rising = platform_get_irq_byname(pdev, "onkey-rising");
+ if (onkey->irq_rising < 0) {
+ dev_err(dev, "failed: request IRQ onkey-rising %d\n",
+ onkey->irq_rising);
+ return onkey->irq_rising;
+ }
+
+ if (!device_property_read_u32(dev, "power-off-time-sec", &val)) {
+ if (val > 0 && val <= 16) {
+ dev_dbg(dev, "power-off-time=%d seconds\n", val);
+ reg |= PONKEY_PWR_OFF;
+ reg |= ((16 - val) & PONKEY_TURNOFF_TIMER_MASK);
+ } else {
+ dev_err(dev, "power-off-time-sec out of range\n");
+ return -EINVAL;
+ }
+ }
+
+ if (device_property_present(dev, "st,onkey-clear-cc-flag"))
+ reg |= PONKEY_CC_FLAG_CLEAR;
+
+ error = regmap_update_bits(pmic->regmap, PKEY_TURNOFF_CR,
+ PONKEY_TURNOFF_MASK, reg);
+ if (error) {
+ dev_err(dev, "PKEY_TURNOFF_CR write failed: %d\n", error);
+ return error;
+ }
+
+ if (device_property_present(dev, "st,onkey-pu-inactive")) {
+ error = regmap_update_bits(pmic->regmap, PADS_PULL_CR,
+ PONKEY_PU_INACTIVE,
+ PONKEY_PU_INACTIVE);
+ if (error) {
+ dev_err(dev, "ONKEY Pads configuration failed: %d\n",
+ error);
+ return error;
+ }
+ }
+
+ input_dev = devm_input_allocate_device(dev);
+ if (!input_dev) {
+ dev_err(dev, "Can't allocate Pwr Onkey Input Device\n");
+ return -ENOMEM;
+ }
+
+ input_dev->name = "pmic_onkey";
+ input_dev->phys = "pmic_onkey/input0";
+
+ input_set_capability(input_dev, EV_KEY, KEY_POWER);
+
+ onkey->input_dev = input_dev;
+
+ /* interrupt is nested in a thread */
+ error = devm_request_threaded_irq(dev, onkey->irq_falling, NULL,
+ onkey_falling_irq, IRQF_ONESHOT,
+ dev_name(dev), onkey);
+ if (error) {
+ dev_err(dev, "Can't get IRQ Onkey Falling: %d\n", error);
+ return error;
+ }
+
+ error = devm_request_threaded_irq(dev, onkey->irq_rising, NULL,
+ onkey_rising_irq, IRQF_ONESHOT,
+ dev_name(dev), onkey);
+ if (error) {
+ dev_err(dev, "Can't get IRQ Onkey Rising: %d\n", error);
+ return error;
+ }
+
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(dev, "Can't register power button: %d\n", error);
+ return error;
+ }
+
+ platform_set_drvdata(pdev, onkey);
+ device_init_wakeup(dev, true);
+
+ return 0;
+}
+
+static int __maybe_unused stpmic1_onkey_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
+
+ if (device_may_wakeup(dev)) {
+ enable_irq_wake(onkey->irq_falling);
+ enable_irq_wake(onkey->irq_rising);
+ }
+ return 0;
+}
+
+static int __maybe_unused stpmic1_onkey_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
+
+ if (device_may_wakeup(dev)) {
+ disable_irq_wake(onkey->irq_falling);
+ disable_irq_wake(onkey->irq_rising);
+ }
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(stpmic1_onkey_pm,
+ stpmic1_onkey_suspend,
+ stpmic1_onkey_resume);
+
+static const struct of_device_id of_stpmic1_onkey_match[] = {
+ { .compatible = "st,stpmic1-onkey" },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, of_stpmic1_onkey_match);
+
+static struct platform_driver stpmic1_onkey_driver = {
+ .probe = stpmic1_onkey_probe,
+ .driver = {
+ .name = "stpmic1_onkey",
+ .of_match_table = of_match_ptr(of_stpmic1_onkey_match),
+ .pm = &stpmic1_onkey_pm,
+ },
+};
+module_platform_driver(stpmic1_onkey_driver);
+
+MODULE_DESCRIPTION("Onkey driver for STPMIC1");
+MODULE_AUTHOR("Pascal Paillet <p.paillet@...com>");
+MODULE_LICENSE("GPL v2");
--
1.9.1
Powered by blists - more mailing lists