[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1543662811-5194-11-git-send-email-anurag.kumar.vulisha@xilinx.com>
Date: Sat, 1 Dec 2018 16:43:31 +0530
From: Anurag Kumar Vulisha <anurag.kumar.vulisha@...inx.com>
To: Felipe Balbi <balbi@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Shuah Khan <shuah@...nel.org>,
Alan Stern <stern@...land.harvard.edu>,
Johan Hovold <johan@...nel.org>,
Jaejoong Kim <climbbb.kim@...il.com>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Roger Quadros <rogerq@...com>,
Manu Gautam <mgautam@...eaurora.org>,
<martin.petersen@...cle.com>, Bart Van Assche <bvanassche@....org>,
Mike Christie <mchristi@...hat.com>,
Matthew Wilcox <willy@...radead.org>,
Colin Ian King <colin.king@...onical.com>
CC: <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<v.anuragkumar@...il.com>, Thinh Nguyen <thinhn@...opsys.com>,
Tejas Joglekar <tejas.joglekar@...opsys.com>,
Ajay Yugalkishore Pandey <APANDEY@...inx.com>,
Anurag Kumar Vulisha <anurag.kumar.vulisha@...inx.com>
Subject: [PATCH v7 10/10] usb: dwc3: Check MISSED ISOC bit only for ISOC endpoints
When streaming is enabled on BULK endpoints and LST bit is set
observed MISSED ISOC bit set in event->status for BULK ep. Since
this bit is only valid for isocronous endpoints, changed the code
to check for isocrnous endpoints when MISSED ISOC bit is set.
Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@...inx.com>
Reviewed-by: Thinh Nguyen <thinhn@...opsys.com>
Tested-by: Tejas Joglekar <tejas.joglekar@...opsys.com>
---
Changes in v7:
1. None
Changes in v6:
1. None
Changes in v5:
1. None
Changes in v4:
1. None
Changes in v3:
1. None
Changes in v2:
1. None
---
drivers/usb/dwc3/gadget.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 216179e..5d5c572 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2409,7 +2409,8 @@ static void dwc3_gadget_endpoint_transfer_in_progress(struct dwc3_ep *dep,
if (event->status & DEPEVT_STATUS_BUSERR)
status = -ECONNRESET;
- if (event->status & DEPEVT_STATUS_MISSED_ISOC) {
+ if ((event->status & DEPEVT_STATUS_MISSED_ISOC) &&
+ usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
status = -EXDEV;
if (list_empty(&dep->started_list))
--
2.1.1
Powered by blists - more mailing lists