| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20181202073443.GB32143@kroah.com>
Date: Sun, 2 Dec 2018 08:34:43 +0100
From: Greg KH <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org,
Andrew Morton <akpm@...ux-foundation.org>,
torvalds@...ux-foundation.org, stable@...r.kernel.org
Cc: lwn@....net, Jiri Slaby <jslaby@...e.cz>
Subject: Re: Linux 3.18.128
diff --git a/Makefile b/Makefile
index 7c78eb797de8..9060189af162 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 3
PATCHLEVEL = 18
-SUBLEVEL = 127
+SUBLEVEL = 128
EXTRAVERSION =
NAME = Diseased Newt
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 37c4fd6aeb7a..42065599d014 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -10,7 +10,7 @@
#
# Copyright (C) 1995-2001 by Russell King
-LDFLAGS_vmlinux :=-p --no-undefined -X
+LDFLAGS_vmlinux :=--no-undefined -X
CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
GZFLAGS :=-9
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index b9d1dfdbe5bb..ae9d3bf79612 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1479,7 +1479,7 @@ static long vphn_get_associativity(unsigned long cpu,
switch (rc) {
case H_FUNCTION:
- printk(KERN_INFO
+ printk_once(KERN_INFO
"VPHN is not supported. Disabling polling...\n");
stop_topology_update();
break;
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index c2d30765bf3d..a4ede00483d1 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -105,8 +105,13 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
/* Ensure the arm clock divider is what we expect */
ret = clk_set_rate(arm_clk, new_freq * 1000);
if (ret) {
+ int ret1;
+
dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
- regulator_set_voltage_tol(arm_reg, volt_old, 0);
+ ret1 = regulator_set_voltage_tol(arm_reg, volt_old, 0);
+ if (ret1)
+ dev_warn(cpu_dev,
+ "failed to restore vddarm voltage: %d\n", ret1);
return ret;
}
diff --git a/drivers/gpu/drm/ast/ast_drv.c b/drivers/gpu/drm/ast/ast_drv.c
index 9a32d9dfdd26..011700262824 100644
--- a/drivers/gpu/drm/ast/ast_drv.c
+++ b/drivers/gpu/drm/ast/ast_drv.c
@@ -60,8 +60,29 @@ static const struct pci_device_id pciidlist[] = {
MODULE_DEVICE_TABLE(pci, pciidlist);
+static void ast_kick_out_firmware_fb(struct pci_dev *pdev)
+{
+ struct apertures_struct *ap;
+ bool primary = false;
+
+ ap = alloc_apertures(1);
+ if (!ap)
+ return;
+
+ ap->ranges[0].base = pci_resource_start(pdev, 0);
+ ap->ranges[0].size = pci_resource_len(pdev, 0);
+
+#ifdef CONFIG_X86
+ primary = pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
+#endif
+ remove_conflicting_framebuffers(ap, "astdrmfb", primary);
+ kfree(ap);
+}
+
static int ast_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
+ ast_kick_out_firmware_fb(pdev);
+
return drm_get_pci_dev(pdev, ent, &driver);
}
diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index 9dc0fd5c1ea4..a43d81b6d5d1 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -549,6 +549,7 @@ static int ast_crtc_do_set_base(struct drm_crtc *crtc,
}
ast_bo_unreserve(bo);
+ ast_set_offset_reg(crtc);
ast_set_start_address_crt1(crtc, (u32)gpu_addr);
return 0;
@@ -1246,7 +1247,7 @@ static int ast_cursor_move(struct drm_crtc *crtc,
ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc7, ((y >> 8) & 0x07));
/* dummy write to fire HWC */
- ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xCB, 0xFF, 0x00);
+ ast_show_cursor(crtc);
return 0;
}
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index e29c04e2aff4..e853a2134680 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -527,14 +527,14 @@ EXPORT_SYMBOL(gameport_set_phys);
*/
static void gameport_init_port(struct gameport *gameport)
{
- static atomic_t gameport_no = ATOMIC_INIT(0);
+ static atomic_t gameport_no = ATOMIC_INIT(-1);
__module_get(THIS_MODULE);
mutex_init(&gameport->drv_mutex);
device_initialize(&gameport->dev);
dev_set_name(&gameport->dev, "gameport%lu",
- (unsigned long)atomic_inc_return(&gameport_no) - 1);
+ (unsigned long)atomic_inc_return(&gameport_no));
gameport->dev.bus = &gameport_bus;
gameport->dev.release = gameport_release_port;
if (gameport->parent)
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 1a728f310b27..2e52015634f9 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -31,12 +31,14 @@
* - the iForce driver drivers/char/joystick/iforce.c
* - the skeleton-driver drivers/usb/usb-skeleton.c
* - Xbox 360 information http://www.free60.org/wiki/Gamepad
+ * - Xbox One information https://github.com/quantus/xbox-one-controller-protocol
*
* Thanks to:
* - ITO Takayuki for providing essential xpad information on his website
* - Vojtech Pavlik - iforce driver / input subsystem
* - Greg Kroah-Hartman - usb-skeleton driver
* - XBOX Linux project - extra USB id's
+ * - Pekka Pöyry (quantus) - Xbox One controller reverse engineering
*
* TODO:
* - fine tune axes (especially trigger axes)
@@ -74,18 +76,23 @@
*/
#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/rcupdate.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/module.h>
#include <linux/usb/input.h>
+#include <linux/usb/quirks.h>
#define DRIVER_AUTHOR "Marko Friedemann <mfr@...-chemnitz.de>"
#define DRIVER_DESC "X-Box pad driver"
-#define XPAD_PKT_LEN 32
+#define XPAD_PKT_LEN 64
-/* xbox d-pads should map to buttons, as is required for DDR pads
- but we map them to axes when possible to simplify things */
+/*
+ * xbox d-pads should map to buttons, as is required for DDR pads
+ * but we map them to axes when possible to simplify things
+ */
#define MAP_DPAD_TO_BUTTONS (1 << 0)
#define MAP_TRIGGERS_TO_BUTTONS (1 << 1)
#define MAP_STICKS_TO_NULL (1 << 2)
@@ -110,6 +117,10 @@ static bool sticks_to_null;
module_param(sticks_to_null, bool, S_IRUGO);
MODULE_PARM_DESC(sticks_to_null, "Do not map sticks at all for unknown pads");
+static bool auto_poweroff = true;
+module_param(auto_poweroff, bool, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(auto_poweroff, "Power off wireless controllers on suspend");
+
static const struct xpad_device {
u16 idVendor;
u16 idProduct;
@@ -117,42 +128,77 @@ static const struct xpad_device {
u8 mapping;
u8 xtype;
} xpad_device[] = {
+ { 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 },
+ { 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX },
+ { 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX },
+ { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
+ { 0x044f, 0x0f10, "Thrustmaster Modena GT Wheel", 0, XTYPE_XBOX },
+ { 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 },
{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX },
{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX },
{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
+ { 0x045e, 0x0288, "Microsoft Xbox Controller S v2", 0, XTYPE_XBOX },
{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
- { 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
+ { 0x045e, 0x028f, "Microsoft X-Box 360 pad v2", 0, XTYPE_XBOX360 },
{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
+ { 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
+ { 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE },
+ { 0x045e, 0x02e3, "Microsoft X-Box One Elite pad", 0, XTYPE_XBOXONE },
+ { 0x045e, 0x02ea, "Microsoft X-Box One S pad", 0, XTYPE_XBOXONE },
{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
- { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
- { 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 },
{ 0x046d, 0xc21d, "Logitech Gamepad F310", 0, XTYPE_XBOX360 },
{ 0x046d, 0xc21e, "Logitech Gamepad F510", 0, XTYPE_XBOX360 },
{ 0x046d, 0xc21f, "Logitech Gamepad F710", 0, XTYPE_XBOX360 },
{ 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", 0, XTYPE_XBOX },
+ { 0x046d, 0xca8a, "Logitech Precision Vibration Feedback Wheel", 0, XTYPE_XBOX },
+ { 0x046d, 0xcaa3, "Logitech DriveFx Racing Wheel", 0, XTYPE_XBOX360 },
+ { 0x056e, 0x2004, "Elecom JC-U3613M", 0, XTYPE_XBOX360 },
{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", 0, XTYPE_XBOX },
{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", 0, XTYPE_XBOX },
+ { 0x05fe, 0x3030, "Chic Controller", 0, XTYPE_XBOX },
+ { 0x05fe, 0x3031, "Chic Controller", 0, XTYPE_XBOX },
+ { 0x062a, 0x0020, "Logic3 Xbox GamePad", 0, XTYPE_XBOX },
+ { 0x062a, 0x0033, "Competition Pro Steering Wheel", 0, XTYPE_XBOX },
+ { 0x06a3, 0x0200, "Saitek Racing Wheel", 0, XTYPE_XBOX },
+ { 0x06a3, 0x0201, "Saitek Adrenalin", 0, XTYPE_XBOX },
+ { 0x06a3, 0xf51a, "Saitek P3600", 0, XTYPE_XBOX360 },
+ { 0x0738, 0x4506, "Mad Catz 4506 Wireless Controller", 0, XTYPE_XBOX },
{ 0x0738, 0x4516, "Mad Catz Control Pad", 0, XTYPE_XBOX },
+ { 0x0738, 0x4520, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },
{ 0x0738, 0x4522, "Mad Catz LumiCON", 0, XTYPE_XBOX },
{ 0x0738, 0x4526, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },
+ { 0x0738, 0x4530, "Mad Catz Universal MC2 Racing Wheel and Pedals", 0, XTYPE_XBOX },
{ 0x0738, 0x4536, "Mad Catz MicroCON", 0, XTYPE_XBOX },
{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX },
+ { 0x0738, 0x4586, "Mad Catz MicroCon Wireless Controller", 0, XTYPE_XBOX },
+ { 0x0738, 0x4588, "Mad Catz Blaster", 0, XTYPE_XBOX },
+ { 0x0738, 0x45ff, "Mad Catz Beat Pad (w/ Handle)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x0738, 0x4718, "Mad Catz Street Fighter IV FightStick SE", 0, XTYPE_XBOX360 },
{ 0x0738, 0x4726, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0738, 0x4736, "Mad Catz MicroCon Gamepad", 0, XTYPE_XBOX360 },
{ 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0738, 0x4740, "Mad Catz Beat Pad", 0, XTYPE_XBOX360 },
+ { 0x0738, 0x4743, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+ { 0x0738, 0x4758, "Mad Catz Arcade Game Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0738, 0x4a01, "Mad Catz FightStick TE 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+ { 0x0738, 0x9871, "Mad Catz Portable Drum", 0, XTYPE_XBOX360 },
{ 0x0738, 0xb726, "Mad Catz Xbox controller - MW2", 0, XTYPE_XBOX360 },
+ { 0x0738, 0xb738, "Mad Catz MVC2TE Stick 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 },
{ 0x0738, 0xcb02, "Saitek Cyborg Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 },
{ 0x0738, 0xcb03, "Saitek P3200 Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0738, 0xcb29, "Saitek Aviator Stick AV8R02", 0, XTYPE_XBOX360 },
{ 0x0738, 0xf738, "Super SFIV FightStick TE S", 0, XTYPE_XBOX360 },
+ { 0x07ff, 0xffff, "Mad Catz GamePad", 0, XTYPE_XBOX360 },
+ { 0x0c12, 0x0005, "Intec wireless", 0, XTYPE_XBOX },
+ { 0x0c12, 0x8801, "Nyko Xbox Controller", 0, XTYPE_XBOX },
{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX },
{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX },
@@ -160,32 +206,66 @@ static const struct xpad_device {
{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX },
{ 0x0d2f, 0x0002, "Andamiro Pump It Up pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX },
+ { 0x0e4c, 0x1103, "Radica Gamester Reflex", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX },
{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX },
+ { 0x0e4c, 0x3510, "Radica Gamester", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX },
+ { 0x0e6f, 0x0008, "After Glow Pro Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0e6f, 0x0113, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x011f, "Rock Candy Gamepad Wired Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0131, "PDP EA Sports Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0133, "Xbox 360 Wired Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0139, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x013a, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0146, "Rock Candy Wired Controller for Xbox One", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0147, "PDP Marvel Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x015c, "PDP Xbox One Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0161, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0162, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0163, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0164, "PDP Battlefield One", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0165, "PDP Titanfall 2", 0, XTYPE_XBOXONE },
{ 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
{ 0x0e6f, 0x021f, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0246, "Rock Candy Gamepad for Xbox One 2015", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x02ab, "PDP Controller for Xbox One", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x02a4, "PDP Wired Controller for Xbox One - Stealth Series", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x02a6, "PDP Wired Controller for Xbox One - Camo Series", 0, XTYPE_XBOXONE },
{ 0x0e6f, 0x0301, "Logic3 Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0346, "Rock Candy Gamepad for Xbox One 2016", 0, XTYPE_XBOXONE },
{ 0x0e6f, 0x0401, "Logic3 Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0413, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0501, "PDP Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0xf900, "PDP Afterglow AX.1", 0, XTYPE_XBOX360 },
{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX },
{ 0x0e8f, 0x3008, "Generic xbox control (dealextreme)", 0, XTYPE_XBOX },
{ 0x0f0d, 0x000a, "Hori Co. DOA4 FightStick", 0, XTYPE_XBOX360 },
+ { 0x0f0d, 0x000c, "Hori PadEX Turbo", 0, XTYPE_XBOX360 },
{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0f0d, 0x001b, "Hori Real Arcade Pro VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0f0d, 0x0063, "Hori Real Arcade Pro Hayabusa (USA) Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+ { 0x0f0d, 0x0067, "HORIPAD ONE", 0, XTYPE_XBOXONE },
+ { 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+ { 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX },
{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
+ { 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 },
{ 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 },
+ { 0x12ab, 0x0303, "Mortal Kombat Klassic FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 },
{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+ { 0x1430, 0xf801, "RedOctane Controller", 0, XTYPE_XBOX360 },
{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
{ 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+ { 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
{ 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE },
{ 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 },
{ 0x15e4, 0x3f0a, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
@@ -193,24 +273,67 @@ static const struct xpad_device {
{ 0x162e, 0xbeef, "Joytech Neo-Se Take2", 0, XTYPE_XBOX360 },
{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 },
{ 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 },
- { 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+ { 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0x0130, "Ion Drum Rocker", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x1bad, 0xf016, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf018, "Mad Catz Street Fighter IV SE Fighting Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf019, "Mad Catz Brawlstick for Xbox 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf021, "Mad Cats Ghost Recon FS GamePad", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf023, "MLG Pro Circuit Controller (Xbox)", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf025, "Mad Catz Call Of Duty", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf027, "Mad Catz FPS Pro", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf028, "Street Fighter IV FightPad", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf02e, "Mad Catz Fightpad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf030, "Mad Catz Xbox 360 MC2 MicroCon Racing Wheel", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf036, "Mad Catz MicroCon GamePad Pro", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf038, "Street Fighter IV FightStick TE", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf039, "Mad Catz MvC2 TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf03a, "Mad Catz SFxT Fightstick Pro", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf03d, "Street Fighter IV Arcade Stick TE - Chun Li", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf03e, "Mad Catz MLG FightStick TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf03f, "Mad Catz FightStick SoulCaliber", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf042, "Mad Catz FightStick TES+", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf080, "Mad Catz FightStick TE2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf501, "HoriPad EX2 Turbo", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf502, "Hori Real Arcade Pro.VX SA", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf503, "Hori Fighting Stick VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf504, "Hori Real Arcade Pro. EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf505, "Hori Fighting Stick EX2B", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf506, "Hori Real Arcade Pro.EX Premium VLX", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf900, "Harmonix Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf901, "Gamestop Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf903, "Tron Xbox 360 controller", 0, XTYPE_XBOX360 },
- { 0x24c6, 0x5000, "Razer Atrox Arcade Stick", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf904, "PDP Versus Fighting Pad", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf906, "MortalKombat FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xfa01, "MadCatz GamePad", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xfd00, "Razer Onza TE", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xfd01, "Razer Onza", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5000, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5303, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x530a, "Xbox 360 Pro EX Controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x531a, "PowerA Pro Ex", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5397, "FUS1ON Tournament Controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x541a, "PowerA Xbox One Mini Wired Controller", 0, XTYPE_XBOXONE },
+ { 0x24c6, 0x542a, "Xbox ONE spectra", 0, XTYPE_XBOXONE },
+ { 0x24c6, 0x543a, "PowerA Xbox One wired controller", 0, XTYPE_XBOXONE },
{ 0x24c6, 0x5500, "Hori XBOX 360 EX 2 with Turbo", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5501, "Hori Real Arcade Pro VX-SA", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5502, "Hori Fighting Stick VX Alt", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x24c6, 0x5503, "Hori Fighting Edge", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x24c6, 0x5506, "Hori SOULCALIBUR V Stick", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x550d, "Hori GEM Xbox controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x550e, "Hori Real Arcade Pro V Kai 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x24c6, 0x551a, "PowerA FUSION Pro Controller", 0, XTYPE_XBOXONE },
+ { 0x24c6, 0x561a, "PowerA FUSION Controller", 0, XTYPE_XBOXONE },
+ { 0x24c6, 0x5b00, "ThrustMaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5b02, "Thrustmaster, Inc. GPX Controller", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
};
@@ -241,7 +364,6 @@ static const signed short xpad_btn_triggers[] = {
-1
};
-
static const signed short xpad360_btn[] = { /* buttons for x360 controller */
BTN_TL, BTN_TR, /* Button LB/RB */
BTN_MODE, /* The big X button */
@@ -272,15 +394,15 @@ static const signed short xpad_abs_triggers[] = {
* match against vendor id as well. Wired Xbox 360 devices have protocol 1,
* wireless controllers have protocol 129.
*/
-#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
+#define XPAD_XBOX360_VENDOR_PROTOCOL(vend, pr) \
.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
.idVendor = (vend), \
.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
.bInterfaceSubClass = 93, \
.bInterfaceProtocol = (pr)
#define XPAD_XBOX360_VENDOR(vend) \
- { XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
- { XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }
+ { XPAD_XBOX360_VENDOR_PROTOCOL((vend), 1) }, \
+ { XPAD_XBOX360_VENDOR_PROTOCOL((vend), 129) }
/* The Xbox One controller uses subclass 71 and protocol 208. */
#define XPAD_XBOXONE_VENDOR_PROTOCOL(vend, pr) \
@@ -290,51 +412,175 @@ static const signed short xpad_abs_triggers[] = {
.bInterfaceSubClass = 71, \
.bInterfaceProtocol = (pr)
#define XPAD_XBOXONE_VENDOR(vend) \
- { XPAD_XBOXONE_VENDOR_PROTOCOL(vend, 208) }
+ { XPAD_XBOXONE_VENDOR_PROTOCOL((vend), 208) }
-static struct usb_device_id xpad_table[] = {
+static const struct usb_device_id xpad_table[] = {
{ USB_INTERFACE_INFO('X', 'B', 0) }, /* X-Box USB-IF not approved class */
+ XPAD_XBOX360_VENDOR(0x0079), /* GPD Win 2 Controller */
XPAD_XBOX360_VENDOR(0x044f), /* Thrustmaster X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x045e), /* Microsoft X-Box 360 controllers */
XPAD_XBOXONE_VENDOR(0x045e), /* Microsoft X-Box One controllers */
XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */
+ XPAD_XBOX360_VENDOR(0x056e), /* Elecom JC-U3613M */
+ XPAD_XBOX360_VENDOR(0x06a3), /* Saitek P3600 */
XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */
{ USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */
+ XPAD_XBOXONE_VENDOR(0x0738), /* Mad Catz FightStick TE 2 */
+ XPAD_XBOX360_VENDOR(0x07ff), /* Mad Catz GamePad */
XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */
+ XPAD_XBOXONE_VENDOR(0x0e6f), /* 0x0e6f X-Box One controllers */
+ XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
+ XPAD_XBOXONE_VENDOR(0x0f0d), /* Hori Controllers */
+ XPAD_XBOX360_VENDOR(0x11c9), /* Nacon GC100XF */
XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */
XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */
- XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */
- XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
- XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */
- XPAD_XBOX360_VENDOR(0x24c6), /* PowerA Controllers */
XPAD_XBOX360_VENDOR(0x1532), /* Razer Sabertooth */
XPAD_XBOXONE_VENDOR(0x1532), /* Razer Wildcat */
XPAD_XBOX360_VENDOR(0x15e4), /* Numark X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x162e), /* Joytech X-Box 360 controllers */
+ XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */
+ XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */
+ XPAD_XBOX360_VENDOR(0x24c6), /* PowerA Controllers */
+ XPAD_XBOXONE_VENDOR(0x24c6), /* PowerA Controllers */
{ }
};
MODULE_DEVICE_TABLE(usb, xpad_table);
+struct xboxone_init_packet {
+ u16 idVendor;
+ u16 idProduct;
+ const u8 *data;
+ u8 len;
+};
+
+#define XBOXONE_INIT_PKT(_vid, _pid, _data) \
+ { \
+ .idVendor = (_vid), \
+ .idProduct = (_pid), \
+ .data = (_data), \
+ .len = ARRAY_SIZE(_data), \
+ }
+
+
+/*
+ * This packet is required for all Xbox One pads with 2015
+ * or later firmware installed (or present from the factory).
+ */
+static const u8 xboxone_fw2015_init[] = {
+ 0x05, 0x20, 0x00, 0x01, 0x00
+};
+
+/*
+ * This packet is required for the Titanfall 2 Xbox One pads
+ * (0x0e6f:0x0165) to finish initialization and for Hori pads
+ * (0x0f0d:0x0067) to make the analog sticks work.
+ */
+static const u8 xboxone_hori_init[] = {
+ 0x01, 0x20, 0x00, 0x09, 0x00, 0x04, 0x20, 0x3a,
+ 0x00, 0x00, 0x00, 0x80, 0x00
+};
+
+/*
+ * This packet is required for some of the PDP pads to start
+ * sending input reports. These pads include: (0x0e6f:0x02ab),
+ * (0x0e6f:0x02a4).
+ */
+static const u8 xboxone_pdp_init1[] = {
+ 0x0a, 0x20, 0x00, 0x03, 0x00, 0x01, 0x14
+};
+
+/*
+ * This packet is required for some of the PDP pads to start
+ * sending input reports. These pads include: (0x0e6f:0x02ab),
+ * (0x0e6f:0x02a4).
+ */
+static const u8 xboxone_pdp_init2[] = {
+ 0x06, 0x20, 0x00, 0x02, 0x01, 0x00
+};
+
+/*
+ * A specific rumble packet is required for some PowerA pads to start
+ * sending input reports. One of those pads is (0x24c6:0x543a).
+ */
+static const u8 xboxone_rumblebegin_init[] = {
+ 0x09, 0x00, 0x00, 0x09, 0x00, 0x0F, 0x00, 0x00,
+ 0x1D, 0x1D, 0xFF, 0x00, 0x00
+};
+
+/*
+ * A rumble packet with zero FF intensity will immediately
+ * terminate the rumbling required to init PowerA pads.
+ * This should happen fast enough that the motors don't
+ * spin up to enough speed to actually vibrate the gamepad.
+ */
+static const u8 xboxone_rumbleend_init[] = {
+ 0x09, 0x00, 0x00, 0x09, 0x00, 0x0F, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+/*
+ * This specifies the selection of init packets that a gamepad
+ * will be sent on init *and* the order in which they will be
+ * sent. The correct sequence number will be added when the
+ * packet is going to be sent.
+ */
+static const struct xboxone_init_packet xboxone_init_packets[] = {
+ XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_init),
+ XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_init),
+ XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_fw2015_init),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init1),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init2),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init1),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init2),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02a6, xboxone_pdp_init1),
+ XBOXONE_INIT_PKT(0x0e6f, 0x02a6, xboxone_pdp_init2),
+ XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumbleend_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumbleend_init),
+ XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumbleend_init),
+};
+
+struct xpad_output_packet {
+ u8 data[XPAD_PKT_LEN];
+ u8 len;
+ bool pending;
+};
+
+#define XPAD_OUT_CMD_IDX 0
+#define XPAD_OUT_FF_IDX 1
+#define XPAD_OUT_LED_IDX (1 + IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF))
+#define XPAD_NUM_OUT_PACKETS (1 + \
+ IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF) + \
+ IS_ENABLED(CONFIG_JOYSTICK_XPAD_LEDS))
+
struct usb_xpad {
struct input_dev *dev; /* input device interface */
+ struct input_dev __rcu *x360w_dev;
struct usb_device *udev; /* usb device */
struct usb_interface *intf; /* usb interface */
- int pad_present;
+ bool pad_present;
+ bool input_created;
struct urb *irq_in; /* urb for interrupt in report */
unsigned char *idata; /* input data */
dma_addr_t idata_dma;
- struct urb *bulk_out;
- unsigned char *bdata;
-
struct urb *irq_out; /* urb for interrupt out report */
+ struct usb_anchor irq_out_anchor;
+ bool irq_out_active; /* we must not use an active URB */
+ u8 odata_serial; /* serial number for xbox one protocol */
unsigned char *odata; /* output data */
dma_addr_t odata_dma;
- struct mutex odata_mutex;
+ spinlock_t odata_lock;
+
+ struct xpad_output_packet out_packets[XPAD_NUM_OUT_PACKETS];
+ int last_out_packet;
+ int init_seq;
#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
struct xpad_led *led;
@@ -344,8 +590,15 @@ struct usb_xpad {
int mapping; /* map d-pad to buttons or to axes */
int xtype; /* type of xbox device */
+ int pad_nr; /* the order x360 pads were attached */
+ const char *name; /* name of the device */
+ struct work_struct work; /* init/remove device from callback */
};
+static int xpad_init_input(struct usb_xpad *xpad);
+static void xpad_deinit_input(struct usb_xpad *xpad);
+static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num);
+
/*
* xpad_process_packet
*
@@ -355,7 +608,6 @@ struct usb_xpad {
* The used report descriptor was taken from ITO Takayukis website:
* http://euc.jp/periphs/xbox-controller.ja.html
*/
-
static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
{
struct input_dev *dev = xpad->dev;
@@ -426,10 +678,12 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
* http://www.free60.org/wiki/Gamepad
*/
-static void xpad360_process_packet(struct usb_xpad *xpad,
+static void xpad360_process_packet(struct usb_xpad *xpad, struct input_dev *dev,
u16 cmd, unsigned char *data)
{
- struct input_dev *dev = xpad->dev;
+ /* valid pad data */
+ if (data[0] != 0x00)
+ return;
/* digital pad */
if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
@@ -438,7 +692,16 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
input_report_key(dev, BTN_TRIGGER_HAPPY2, data[2] & 0x08);
input_report_key(dev, BTN_TRIGGER_HAPPY3, data[2] & 0x01);
input_report_key(dev, BTN_TRIGGER_HAPPY4, data[2] & 0x02);
- } else {
+ }
+
+ /*
+ * This should be a simple else block. However historically
+ * xbox360w has mapped DPAD to buttons while xbox360 did not. This
+ * made no sense, but now we can not just switch back and have to
+ * support both behaviors.
+ */
+ if (!(xpad->mapping & MAP_DPAD_TO_BUTTONS) ||
+ xpad->xtype == XTYPE_XBOX360W) {
input_report_abs(dev, ABS_HAT0X,
!!(data[2] & 0x08) - !!(data[2] & 0x04));
input_report_abs(dev, ABS_HAT0Y,
@@ -488,6 +751,31 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
input_sync(dev);
}
+static void xpad_presence_work(struct work_struct *work)
+{
+ struct usb_xpad *xpad = container_of(work, struct usb_xpad, work);
+ int error;
+
+ if (xpad->pad_present) {
+ error = xpad_init_input(xpad);
+ if (error) {
+ /* complain only, not much else we can do here */
+ dev_err(&xpad->dev->dev,
+ "unable to init device: %d\n", error);
+ } else {
+ rcu_assign_pointer(xpad->x360w_dev, xpad->dev);
+ }
+ } else {
+ RCU_INIT_POINTER(xpad->x360w_dev, NULL);
+ synchronize_rcu();
+ /*
+ * Now that we are sure xpad360w_process_packet is not
+ * using input device we can get rid of it.
+ */
+ xpad_deinit_input(xpad);
+ }
+}
+
/*
* xpad360w_process_packet
*
@@ -502,34 +790,63 @@ static void xpad360_process_packet(struct usb_xpad *xpad,
* 01.1 - Pad state (Bytes 4+) valid
*
*/
-
static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
{
+ struct input_dev *dev;
+ bool present;
+
/* Presence change */
if (data[0] & 0x08) {
- if (data[1] & 0x80) {
- xpad->pad_present = 1;
- usb_submit_urb(xpad->bulk_out, GFP_ATOMIC);
- } else
- xpad->pad_present = 0;
+ present = (data[1] & 0x80) != 0;
+
+ if (xpad->pad_present != present) {
+ xpad->pad_present = present;
+ schedule_work(&xpad->work);
+ }
}
/* Valid pad data */
- if (!(data[1] & 0x1))
+ if (data[1] != 0x1)
return;
- xpad360_process_packet(xpad, cmd, &data[4]);
+ rcu_read_lock();
+ dev = rcu_dereference(xpad->x360w_dev);
+ if (dev)
+ xpad360_process_packet(xpad, dev, cmd, &data[4]);
+ rcu_read_unlock();
}
/*
- * xpadone_process_buttons
+ * xpadone_process_packet
*
- * Process a button update packet from an Xbox one controller.
+ * Completes a request by converting the data into events for the
+ * input subsystem. This version is for the Xbox One controller.
+ *
+ * The report format was gleaned from
+ * https://github.com/kylelemons/xbox/blob/master/xbox.go
*/
-static void xpadone_process_buttons(struct usb_xpad *xpad,
- struct input_dev *dev,
- unsigned char *data)
+static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
{
+ struct input_dev *dev = xpad->dev;
+
+ /* the xbox button has its own special report */
+ if (data[0] == 0X07) {
+ /*
+ * The Xbox One S controller requires these reports to be
+ * acked otherwise it continues sending them forever and
+ * won't report further mode button events.
+ */
+ if (data[1] == 0x30)
+ xpadone_ack_mode_report(xpad, data[2]);
+
+ input_report_key(dev, BTN_MODE, data[4] & 0x01);
+ input_sync(dev);
+ return;
+ }
+ /* check invalid packet */
+ else if (data[0] != 0X20)
+ return;
+
/* menu/view buttons */
input_report_key(dev, BTN_START, data[4] & 0x04);
input_report_key(dev, BTN_SELECT, data[4] & 0x08);
@@ -592,34 +909,6 @@ static void xpadone_process_buttons(struct usb_xpad *xpad,
input_sync(dev);
}
-/*
- * xpadone_process_packet
- *
- * Completes a request by converting the data into events for the
- * input subsystem. This version is for the Xbox One controller.
- *
- * The report format was gleaned from
- * https://github.com/kylelemons/xbox/blob/master/xbox.go
- */
-
-static void xpadone_process_packet(struct usb_xpad *xpad,
- u16 cmd, unsigned char *data)
-{
- struct input_dev *dev = xpad->dev;
-
- switch (data[0]) {
- case 0x20:
- xpadone_process_buttons(xpad, dev, data);
- break;
-
- case 0x07:
- /* the xbox button has its own special report */
- input_report_key(dev, BTN_MODE, data[4] & 0x01);
- input_sync(dev);
- break;
- }
-}
-
static void xpad_irq_in(struct urb *urb)
{
struct usb_xpad *xpad = urb->context;
@@ -647,7 +936,7 @@ static void xpad_irq_in(struct urb *urb)
switch (xpad->xtype) {
case XTYPE_XBOX360:
- xpad360_process_packet(xpad, 0, xpad->idata);
+ xpad360_process_packet(xpad, xpad->dev, 0, xpad->idata);
break;
case XTYPE_XBOX360W:
xpad360w_process_packet(xpad, 0, xpad->idata);
@@ -666,40 +955,109 @@ exit:
__func__, retval);
}
-static void xpad_bulk_out(struct urb *urb)
+/* Callers must hold xpad->odata_lock spinlock */
+static bool xpad_prepare_next_init_packet(struct usb_xpad *xpad)
{
- struct usb_xpad *xpad = urb->context;
- struct device *dev = &xpad->intf->dev;
+ const struct xboxone_init_packet *init_packet;
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dev_dbg(dev, "%s - urb shutting down with status: %d\n",
- __func__, urb->status);
- break;
- default:
- dev_dbg(dev, "%s - nonzero urb status received: %d\n",
- __func__, urb->status);
+ if (xpad->xtype != XTYPE_XBOXONE)
+ return false;
+
+ /* Perform initialization sequence for Xbox One pads that require it */
+ while (xpad->init_seq < ARRAY_SIZE(xboxone_init_packets)) {
+ init_packet = &xboxone_init_packets[xpad->init_seq++];
+
+ if (init_packet->idVendor != 0 &&
+ init_packet->idVendor != xpad->dev->id.vendor)
+ continue;
+
+ if (init_packet->idProduct != 0 &&
+ init_packet->idProduct != xpad->dev->id.product)
+ continue;
+
+ /* This packet applies to our device, so prepare to send it */
+ memcpy(xpad->odata, init_packet->data, init_packet->len);
+ xpad->irq_out->transfer_buffer_length = init_packet->len;
+
+ /* Update packet with current sequence number */
+ xpad->odata[2] = xpad->odata_serial++;
+ return true;
+ }
+
+ return false;
+}
+
+/* Callers must hold xpad->odata_lock spinlock */
+static bool xpad_prepare_next_out_packet(struct usb_xpad *xpad)
+{
+ struct xpad_output_packet *pkt, *packet = NULL;
+ int i;
+
+ /* We may have init packets to send before we can send user commands */
+ if (xpad_prepare_next_init_packet(xpad))
+ return true;
+
+ for (i = 0; i < XPAD_NUM_OUT_PACKETS; i++) {
+ if (++xpad->last_out_packet >= XPAD_NUM_OUT_PACKETS)
+ xpad->last_out_packet = 0;
+
+ pkt = &xpad->out_packets[xpad->last_out_packet];
+ if (pkt->pending) {
+ dev_dbg(&xpad->intf->dev,
+ "%s - found pending output packet %d\n",
+ __func__, xpad->last_out_packet);
+ packet = pkt;
+ break;
+ }
+ }
+
+ if (packet) {
+ memcpy(xpad->odata, packet->data, packet->len);
+ xpad->irq_out->transfer_buffer_length = packet->len;
+ packet->pending = false;
+ return true;
+ }
+
+ return false;
+}
+
+/* Callers must hold xpad->odata_lock spinlock */
+static int xpad_try_sending_next_out_packet(struct usb_xpad *xpad)
+{
+ int error;
+
+ if (!xpad->irq_out_active && xpad_prepare_next_out_packet(xpad)) {
+ usb_anchor_urb(xpad->irq_out, &xpad->irq_out_anchor);
+ error = usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
+ if (error) {
+ dev_err(&xpad->intf->dev,
+ "%s - usb_submit_urb failed with result %d\n",
+ __func__, error);
+ usb_unanchor_urb(xpad->irq_out);
+ return -EIO;
+ }
+
+ xpad->irq_out_active = true;
}
+
+ return 0;
}
static void xpad_irq_out(struct urb *urb)
{
struct usb_xpad *xpad = urb->context;
struct device *dev = &xpad->intf->dev;
- int retval, status;
+ int status = urb->status;
+ int error;
+ unsigned long flags;
- status = urb->status;
+ spin_lock_irqsave(&xpad->odata_lock, flags);
switch (status) {
case 0:
/* success */
- return;
+ xpad->irq_out_active = xpad_prepare_next_out_packet(xpad);
+ break;
case -ECONNRESET:
case -ENOENT:
@@ -707,49 +1065,53 @@ static void xpad_irq_out(struct urb *urb)
/* this urb is terminated, clean up */
dev_dbg(dev, "%s - urb shutting down with status: %d\n",
__func__, status);
- return;
+ xpad->irq_out_active = false;
+ break;
default:
dev_dbg(dev, "%s - nonzero urb status received: %d\n",
__func__, status);
- goto exit;
+ break;
}
-exit:
- retval = usb_submit_urb(urb, GFP_ATOMIC);
- if (retval)
- dev_err(dev, "%s - usb_submit_urb failed with result %d\n",
- __func__, retval);
+ if (xpad->irq_out_active) {
+ usb_anchor_urb(urb, &xpad->irq_out_anchor);
+ error = usb_submit_urb(urb, GFP_ATOMIC);
+ if (error) {
+ dev_err(dev,
+ "%s - usb_submit_urb failed with result %d\n",
+ __func__, error);
+ usb_unanchor_urb(urb);
+ xpad->irq_out_active = false;
+ }
+ }
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
}
-static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
+static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad,
+ struct usb_endpoint_descriptor *ep_irq_out)
{
- struct usb_endpoint_descriptor *ep_irq_out;
- int ep_irq_out_idx;
int error;
if (xpad->xtype == XTYPE_UNKNOWN)
return 0;
+ init_usb_anchor(&xpad->irq_out_anchor);
+
xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN,
GFP_KERNEL, &xpad->odata_dma);
- if (!xpad->odata) {
- error = -ENOMEM;
- goto fail1;
- }
+ if (!xpad->odata)
+ return -ENOMEM;
- mutex_init(&xpad->odata_mutex);
+ spin_lock_init(&xpad->odata_lock);
xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL);
if (!xpad->irq_out) {
error = -ENOMEM;
- goto fail2;
+ goto err_free_coherent;
}
- /* Xbox One controller has in/out endpoints swapped. */
- ep_irq_out_idx = xpad->xtype == XTYPE_XBOXONE ? 0 : 1;
- ep_irq_out = &intf->cur_altsetting->endpoint[ep_irq_out_idx].desc;
-
usb_fill_int_urb(xpad->irq_out, xpad->udev,
usb_sndintpipe(xpad->udev, ep_irq_out->bEndpointAddress),
xpad->odata, XPAD_PKT_LEN,
@@ -759,14 +1121,21 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
return 0;
- fail2: usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma);
- fail1: return error;
+err_free_coherent:
+ usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma);
+ return error;
}
static void xpad_stop_output(struct usb_xpad *xpad)
{
- if (xpad->xtype != XTYPE_UNKNOWN)
- usb_kill_urb(xpad->irq_out);
+ if (xpad->xtype != XTYPE_UNKNOWN) {
+ if (!usb_wait_anchor_empty_timeout(&xpad->irq_out_anchor,
+ 5000)) {
+ dev_warn(&xpad->intf->dev,
+ "timed out waiting for output URB to complete, killing\n");
+ usb_kill_anchored_urbs(&xpad->irq_out_anchor);
+ }
+ }
}
static void xpad_deinit_output(struct usb_xpad *xpad)
@@ -778,72 +1147,179 @@ static void xpad_deinit_output(struct usb_xpad *xpad)
}
}
+static int xpad_inquiry_pad_presence(struct usb_xpad *xpad)
+{
+ struct xpad_output_packet *packet =
+ &xpad->out_packets[XPAD_OUT_CMD_IDX];
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ packet->data[0] = 0x08;
+ packet->data[1] = 0x00;
+ packet->data[2] = 0x0F;
+ packet->data[3] = 0xC0;
+ packet->data[4] = 0x00;
+ packet->data[5] = 0x00;
+ packet->data[6] = 0x00;
+ packet->data[7] = 0x00;
+ packet->data[8] = 0x00;
+ packet->data[9] = 0x00;
+ packet->data[10] = 0x00;
+ packet->data[11] = 0x00;
+ packet->len = 12;
+ packet->pending = true;
+
+ /* Reset the sequence so we send out presence first */
+ xpad->last_out_packet = -1;
+ retval = xpad_try_sending_next_out_packet(xpad);
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+
+ return retval;
+}
+
+static int xpad_start_xbox_one(struct usb_xpad *xpad)
+{
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ /*
+ * Begin the init sequence by attempting to send a packet.
+ * We will cycle through the init packet sequence before
+ * sending any packets from the output ring.
+ */
+ xpad->init_seq = 0;
+ retval = xpad_try_sending_next_out_packet(xpad);
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+
+ return retval;
+}
+
+static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num)
+{
+ unsigned long flags;
+ struct xpad_output_packet *packet =
+ &xpad->out_packets[XPAD_OUT_CMD_IDX];
+ static const u8 mode_report_ack[] = {
+ 0x01, 0x20, 0x00, 0x09, 0x00, 0x07, 0x20, 0x02,
+ 0x00, 0x00, 0x00, 0x00, 0x00
+ };
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ packet->len = sizeof(mode_report_ack);
+ memcpy(packet->data, mode_report_ack, packet->len);
+ packet->data[2] = seq_num;
+ packet->pending = true;
+
+ /* Reset the sequence so we send out the ack now */
+ xpad->last_out_packet = -1;
+ xpad_try_sending_next_out_packet(xpad);
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+}
+
#ifdef CONFIG_JOYSTICK_XPAD_FF
static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect)
{
struct usb_xpad *xpad = input_get_drvdata(dev);
+ struct xpad_output_packet *packet = &xpad->out_packets[XPAD_OUT_FF_IDX];
+ __u16 strong;
+ __u16 weak;
+ int retval;
+ unsigned long flags;
- if (effect->type == FF_RUMBLE) {
- __u16 strong = effect->u.rumble.strong_magnitude;
- __u16 weak = effect->u.rumble.weak_magnitude;
-
- switch (xpad->xtype) {
-
- case XTYPE_XBOX:
- xpad->odata[0] = 0x00;
- xpad->odata[1] = 0x06;
- xpad->odata[2] = 0x00;
- xpad->odata[3] = strong / 256; /* left actuator */
- xpad->odata[4] = 0x00;
- xpad->odata[5] = weak / 256; /* right actuator */
- xpad->irq_out->transfer_buffer_length = 6;
-
- return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
-
- case XTYPE_XBOX360:
- xpad->odata[0] = 0x00;
- xpad->odata[1] = 0x08;
- xpad->odata[2] = 0x00;
- xpad->odata[3] = strong / 256; /* left actuator? */
- xpad->odata[4] = weak / 256; /* right actuator? */
- xpad->odata[5] = 0x00;
- xpad->odata[6] = 0x00;
- xpad->odata[7] = 0x00;
- xpad->irq_out->transfer_buffer_length = 8;
-
- return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
-
- case XTYPE_XBOX360W:
- xpad->odata[0] = 0x00;
- xpad->odata[1] = 0x01;
- xpad->odata[2] = 0x0F;
- xpad->odata[3] = 0xC0;
- xpad->odata[4] = 0x00;
- xpad->odata[5] = strong / 256;
- xpad->odata[6] = weak / 256;
- xpad->odata[7] = 0x00;
- xpad->odata[8] = 0x00;
- xpad->odata[9] = 0x00;
- xpad->odata[10] = 0x00;
- xpad->odata[11] = 0x00;
- xpad->irq_out->transfer_buffer_length = 12;
-
- return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
-
- default:
- dev_dbg(&xpad->dev->dev,
- "%s - rumble command sent to unsupported xpad type: %d\n",
- __func__, xpad->xtype);
- return -1;
- }
+ if (effect->type != FF_RUMBLE)
+ return 0;
+
+ strong = effect->u.rumble.strong_magnitude;
+ weak = effect->u.rumble.weak_magnitude;
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ switch (xpad->xtype) {
+ case XTYPE_XBOX:
+ packet->data[0] = 0x00;
+ packet->data[1] = 0x06;
+ packet->data[2] = 0x00;
+ packet->data[3] = strong / 256; /* left actuator */
+ packet->data[4] = 0x00;
+ packet->data[5] = weak / 256; /* right actuator */
+ packet->len = 6;
+ packet->pending = true;
+ break;
+
+ case XTYPE_XBOX360:
+ packet->data[0] = 0x00;
+ packet->data[1] = 0x08;
+ packet->data[2] = 0x00;
+ packet->data[3] = strong / 256; /* left actuator? */
+ packet->data[4] = weak / 256; /* right actuator? */
+ packet->data[5] = 0x00;
+ packet->data[6] = 0x00;
+ packet->data[7] = 0x00;
+ packet->len = 8;
+ packet->pending = true;
+ break;
+
+ case XTYPE_XBOX360W:
+ packet->data[0] = 0x00;
+ packet->data[1] = 0x01;
+ packet->data[2] = 0x0F;
+ packet->data[3] = 0xC0;
+ packet->data[4] = 0x00;
+ packet->data[5] = strong / 256;
+ packet->data[6] = weak / 256;
+ packet->data[7] = 0x00;
+ packet->data[8] = 0x00;
+ packet->data[9] = 0x00;
+ packet->data[10] = 0x00;
+ packet->data[11] = 0x00;
+ packet->len = 12;
+ packet->pending = true;
+ break;
+
+ case XTYPE_XBOXONE:
+ packet->data[0] = 0x09; /* activate rumble */
+ packet->data[1] = 0x00;
+ packet->data[2] = xpad->odata_serial++;
+ packet->data[3] = 0x09;
+ packet->data[4] = 0x00;
+ packet->data[5] = 0x0F;
+ packet->data[6] = 0x00;
+ packet->data[7] = 0x00;
+ packet->data[8] = strong / 512; /* left actuator */
+ packet->data[9] = weak / 512; /* right actuator */
+ packet->data[10] = 0xFF; /* on period */
+ packet->data[11] = 0x00; /* off period */
+ packet->data[12] = 0xFF; /* repeat count */
+ packet->len = 13;
+ packet->pending = true;
+ break;
+
+ default:
+ dev_dbg(&xpad->dev->dev,
+ "%s - rumble command sent to unsupported xpad type: %d\n",
+ __func__, xpad->xtype);
+ retval = -EINVAL;
+ goto out;
}
- return 0;
+ retval = xpad_try_sending_next_out_packet(xpad);
+
+out:
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+ return retval;
}
static int xpad_init_ff(struct usb_xpad *xpad)
{
- if (xpad->xtype == XTYPE_UNKNOWN || xpad->xtype == XTYPE_XBOXONE)
+ if (xpad->xtype == XTYPE_UNKNOWN)
return 0;
input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);
@@ -857,6 +1333,9 @@ static int xpad_init_ff(struct usb_xpad *xpad) { return 0; }
#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
#include <linux/leds.h>
+#include <linux/idr.h>
+
+static DEFINE_IDA(xpad_pad_seq);
struct xpad_led {
char name[16];
@@ -864,17 +1343,75 @@ struct xpad_led {
struct usb_xpad *xpad;
};
+/**
+ * set the LEDs on Xbox360 / Wireless Controllers
+ * @param command
+ * 0: off
+ * 1: all blink, then previous setting
+ * 2: 1/top-left blink, then on
+ * 3: 2/top-right blink, then on
+ * 4: 3/bottom-left blink, then on
+ * 5: 4/bottom-right blink, then on
+ * 6: 1/top-left on
+ * 7: 2/top-right on
+ * 8: 3/bottom-left on
+ * 9: 4/bottom-right on
+ * 10: rotate
+ * 11: blink, based on previous setting
+ * 12: slow blink, based on previous setting
+ * 13: rotate with two lights
+ * 14: persistent slow all blink
+ * 15: blink once, then previous setting
+ */
static void xpad_send_led_command(struct usb_xpad *xpad, int command)
{
- if (command >= 0 && command < 14) {
- mutex_lock(&xpad->odata_mutex);
- xpad->odata[0] = 0x01;
- xpad->odata[1] = 0x03;
- xpad->odata[2] = command;
- xpad->irq_out->transfer_buffer_length = 3;
- usb_submit_urb(xpad->irq_out, GFP_KERNEL);
- mutex_unlock(&xpad->odata_mutex);
+ struct xpad_output_packet *packet =
+ &xpad->out_packets[XPAD_OUT_LED_IDX];
+ unsigned long flags;
+
+ command %= 16;
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ switch (xpad->xtype) {
+ case XTYPE_XBOX360:
+ packet->data[0] = 0x01;
+ packet->data[1] = 0x03;
+ packet->data[2] = command;
+ packet->len = 3;
+ packet->pending = true;
+ break;
+
+ case XTYPE_XBOX360W:
+ packet->data[0] = 0x00;
+ packet->data[1] = 0x00;
+ packet->data[2] = 0x08;
+ packet->data[3] = 0x40 + command;
+ packet->data[4] = 0x00;
+ packet->data[5] = 0x00;
+ packet->data[6] = 0x00;
+ packet->data[7] = 0x00;
+ packet->data[8] = 0x00;
+ packet->data[9] = 0x00;
+ packet->data[10] = 0x00;
+ packet->data[11] = 0x00;
+ packet->len = 12;
+ packet->pending = true;
+ break;
}
+
+ xpad_try_sending_next_out_packet(xpad);
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+}
+
+/*
+ * Light up the segment corresponding to the pad number on
+ * Xbox 360 Controllers.
+ */
+static void xpad_identify_controller(struct usb_xpad *xpad)
+{
+ led_set_brightness(&xpad->led->led_cdev, (xpad->pad_nr % 4) + 2);
}
static void xpad_led_set(struct led_classdev *led_cdev,
@@ -888,41 +1425,45 @@ static void xpad_led_set(struct led_classdev *led_cdev,
static int xpad_led_probe(struct usb_xpad *xpad)
{
- static atomic_t led_seq = ATOMIC_INIT(0);
- long led_no;
struct xpad_led *led;
struct led_classdev *led_cdev;
int error;
- if (xpad->xtype != XTYPE_XBOX360)
+ if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX360W)
return 0;
xpad->led = led = kzalloc(sizeof(struct xpad_led), GFP_KERNEL);
if (!led)
return -ENOMEM;
- led_no = (long)atomic_inc_return(&led_seq) - 1;
+ xpad->pad_nr = ida_simple_get(&xpad_pad_seq, 0, 0, GFP_KERNEL);
+ if (xpad->pad_nr < 0) {
+ error = xpad->pad_nr;
+ goto err_free_mem;
+ }
- snprintf(led->name, sizeof(led->name), "xpad%ld", led_no);
+ snprintf(led->name, sizeof(led->name), "xpad%d", xpad->pad_nr);
led->xpad = xpad;
led_cdev = &led->led_cdev;
led_cdev->name = led->name;
led_cdev->brightness_set = xpad_led_set;
+ led_cdev->flags = LED_CORE_SUSPENDRESUME;
error = led_classdev_register(&xpad->udev->dev, led_cdev);
- if (error) {
- kfree(led);
- xpad->led = NULL;
- return error;
- }
+ if (error)
+ goto err_free_id;
- /*
- * Light up the segment corresponding to controller number
- */
- xpad_send_led_command(xpad, (led_no % 4) + 2);
+ xpad_identify_controller(xpad);
return 0;
+
+err_free_id:
+ ida_simple_remove(&xpad_pad_seq, xpad->pad_nr);
+err_free_mem:
+ kfree(led);
+ xpad->led = NULL;
+ return error;
}
static void xpad_led_disconnect(struct usb_xpad *xpad)
@@ -931,6 +1472,7 @@ static void xpad_led_disconnect(struct usb_xpad *xpad)
if (xpad_led) {
led_classdev_unregister(&xpad_led->led_cdev);
+ ida_simple_remove(&xpad_pad_seq, xpad->pad_nr);
kfree(xpad_led);
}
}
@@ -939,44 +1481,108 @@ static int xpad_led_probe(struct usb_xpad *xpad) { return 0; }
static void xpad_led_disconnect(struct usb_xpad *xpad) { }
#endif
-
-static int xpad_open(struct input_dev *dev)
+static int xpad_start_input(struct usb_xpad *xpad)
{
- struct usb_xpad *xpad = input_get_drvdata(dev);
-
- /* URB was submitted in probe */
- if (xpad->xtype == XTYPE_XBOX360W)
- return 0;
+ int error;
- xpad->irq_in->dev = xpad->udev;
if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
return -EIO;
if (xpad->xtype == XTYPE_XBOXONE) {
- /* Xbox one controller needs to be initialized. */
- xpad->odata[0] = 0x05;
- xpad->odata[1] = 0x20;
- xpad->irq_out->transfer_buffer_length = 2;
- return usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+ error = xpad_start_xbox_one(xpad);
+ if (error) {
+ usb_kill_urb(xpad->irq_in);
+ return error;
+ }
}
return 0;
}
-static void xpad_close(struct input_dev *dev)
+static void xpad_stop_input(struct usb_xpad *xpad)
{
- struct usb_xpad *xpad = input_get_drvdata(dev);
+ usb_kill_urb(xpad->irq_in);
+}
+
+static void xpad360w_poweroff_controller(struct usb_xpad *xpad)
+{
+ unsigned long flags;
+ struct xpad_output_packet *packet =
+ &xpad->out_packets[XPAD_OUT_CMD_IDX];
+
+ spin_lock_irqsave(&xpad->odata_lock, flags);
+
+ packet->data[0] = 0x00;
+ packet->data[1] = 0x00;
+ packet->data[2] = 0x08;
+ packet->data[3] = 0xC0;
+ packet->data[4] = 0x00;
+ packet->data[5] = 0x00;
+ packet->data[6] = 0x00;
+ packet->data[7] = 0x00;
+ packet->data[8] = 0x00;
+ packet->data[9] = 0x00;
+ packet->data[10] = 0x00;
+ packet->data[11] = 0x00;
+ packet->len = 12;
+ packet->pending = true;
+
+ /* Reset the sequence so we send out poweroff now */
+ xpad->last_out_packet = -1;
+ xpad_try_sending_next_out_packet(xpad);
+
+ spin_unlock_irqrestore(&xpad->odata_lock, flags);
+}
- if (xpad->xtype != XTYPE_XBOX360W)
+static int xpad360w_start_input(struct usb_xpad *xpad)
+{
+ int error;
+
+ error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
+ if (error)
+ return -EIO;
+
+ /*
+ * Send presence packet.
+ * This will force the controller to resend connection packets.
+ * This is useful in the case we activate the module after the
+ * adapter has been plugged in, as it won't automatically
+ * send us info about the controllers.
+ */
+ error = xpad_inquiry_pad_presence(xpad);
+ if (error) {
usb_kill_urb(xpad->irq_in);
+ return error;
+ }
- xpad_stop_output(xpad);
+ return 0;
+}
+
+static void xpad360w_stop_input(struct usb_xpad *xpad)
+{
+ usb_kill_urb(xpad->irq_in);
+
+ /* Make sure we are done with presence work if it was scheduled */
+ flush_work(&xpad->work);
+}
+
+static int xpad_open(struct input_dev *dev)
+{
+ struct usb_xpad *xpad = input_get_drvdata(dev);
+
+ return xpad_start_input(xpad);
+}
+
+static void xpad_close(struct input_dev *dev)
+{
+ struct usb_xpad *xpad = input_get_drvdata(dev);
+
+ xpad_stop_input(xpad);
}
static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
{
struct usb_xpad *xpad = input_get_drvdata(input_dev);
- set_bit(abs, input_dev->absbit);
switch (abs) {
case ABS_X:
@@ -996,16 +1602,125 @@ static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
case ABS_HAT0Y: /* the d-pad (only if dpad is mapped to axes */
input_set_abs_params(input_dev, abs, -1, 1, 0, 0);
break;
+ default:
+ input_set_abs_params(input_dev, abs, 0, 0, 0, 0);
+ break;
+ }
+}
+
+static void xpad_deinit_input(struct usb_xpad *xpad)
+{
+ if (xpad->input_created) {
+ xpad->input_created = false;
+ xpad_led_disconnect(xpad);
+ input_unregister_device(xpad->dev);
+ }
+}
+
+static int xpad_init_input(struct usb_xpad *xpad)
+{
+ struct input_dev *input_dev;
+ int i, error;
+
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
+
+ xpad->dev = input_dev;
+ input_dev->name = xpad->name;
+ input_dev->phys = xpad->phys;
+ usb_to_input_id(xpad->udev, &input_dev->id);
+
+ if (xpad->xtype == XTYPE_XBOX360W) {
+ /* x360w controllers and the receiver have different ids */
+ input_dev->id.product = 0x02a1;
+ }
+
+ input_dev->dev.parent = &xpad->intf->dev;
+
+ input_set_drvdata(input_dev, xpad);
+
+ if (xpad->xtype != XTYPE_XBOX360W) {
+ input_dev->open = xpad_open;
+ input_dev->close = xpad_close;
+ }
+
+ if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
+ /* set up axes */
+ for (i = 0; xpad_abs[i] >= 0; i++)
+ xpad_set_up_abs(input_dev, xpad_abs[i]);
+ }
+
+ /* set up standard buttons */
+ for (i = 0; xpad_common_btn[i] >= 0; i++)
+ input_set_capability(input_dev, EV_KEY, xpad_common_btn[i]);
+
+ /* set up model-specific ones */
+ if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
+ xpad->xtype == XTYPE_XBOXONE) {
+ for (i = 0; xpad360_btn[i] >= 0; i++)
+ input_set_capability(input_dev, EV_KEY, xpad360_btn[i]);
+ } else {
+ for (i = 0; xpad_btn[i] >= 0; i++)
+ input_set_capability(input_dev, EV_KEY, xpad_btn[i]);
+ }
+
+ if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
+ for (i = 0; xpad_btn_pad[i] >= 0; i++)
+ input_set_capability(input_dev, EV_KEY,
+ xpad_btn_pad[i]);
+ }
+
+ /*
+ * This should be a simple else block. However historically
+ * xbox360w has mapped DPAD to buttons while xbox360 did not. This
+ * made no sense, but now we can not just switch back and have to
+ * support both behaviors.
+ */
+ if (!(xpad->mapping & MAP_DPAD_TO_BUTTONS) ||
+ xpad->xtype == XTYPE_XBOX360W) {
+ for (i = 0; xpad_abs_pad[i] >= 0; i++)
+ xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
+ }
+
+ if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
+ for (i = 0; xpad_btn_triggers[i] >= 0; i++)
+ input_set_capability(input_dev, EV_KEY,
+ xpad_btn_triggers[i]);
+ } else {
+ for (i = 0; xpad_abs_triggers[i] >= 0; i++)
+ xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
}
+
+ error = xpad_init_ff(xpad);
+ if (error)
+ goto err_free_input;
+
+ error = xpad_led_probe(xpad);
+ if (error)
+ goto err_destroy_ff;
+
+ error = input_register_device(xpad->dev);
+ if (error)
+ goto err_disconnect_led;
+
+ xpad->input_created = true;
+ return 0;
+
+err_disconnect_led:
+ xpad_led_disconnect(xpad);
+err_destroy_ff:
+ input_ff_destroy(input_dev);
+err_free_input:
+ input_free_device(input_dev);
+ return error;
}
static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_xpad *xpad;
- struct input_dev *input_dev;
- struct usb_endpoint_descriptor *ep_irq_in;
- int ep_irq_in_idx;
+ struct usb_endpoint_descriptor *ep_irq_in, *ep_irq_out;
int i, error;
if (intf->cur_altsetting->desc.bNumEndpoints != 2)
@@ -1017,49 +1732,44 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
break;
}
- if (xpad_device[i].xtype == XTYPE_XBOXONE &&
- intf->cur_altsetting->desc.bInterfaceNumber != 0) {
- /*
- * The Xbox One controller lists three interfaces all with the
- * same interface class, subclass and protocol. Differentiate by
- * interface number.
- */
- return -ENODEV;
- }
-
xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!xpad || !input_dev) {
- error = -ENOMEM;
- goto fail1;
- }
+ if (!xpad)
+ return -ENOMEM;
+
+ usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
+ strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
xpad->idata = usb_alloc_coherent(udev, XPAD_PKT_LEN,
GFP_KERNEL, &xpad->idata_dma);
if (!xpad->idata) {
error = -ENOMEM;
- goto fail1;
+ goto err_free_mem;
}
xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL);
if (!xpad->irq_in) {
error = -ENOMEM;
- goto fail2;
+ goto err_free_idata;
}
xpad->udev = udev;
xpad->intf = intf;
xpad->mapping = xpad_device[i].mapping;
xpad->xtype = xpad_device[i].xtype;
+ xpad->name = xpad_device[i].name;
+ INIT_WORK(&xpad->work, xpad_presence_work);
if (xpad->xtype == XTYPE_UNKNOWN) {
if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) {
if (intf->cur_altsetting->desc.bInterfaceProtocol == 129)
xpad->xtype = XTYPE_XBOX360W;
+ else if (intf->cur_altsetting->desc.bInterfaceProtocol == 208)
+ xpad->xtype = XTYPE_XBOXONE;
else
xpad->xtype = XTYPE_XBOX360;
- } else
+ } else {
xpad->xtype = XTYPE_XBOX;
+ }
if (dpad_to_buttons)
xpad->mapping |= MAP_DPAD_TO_BUTTONS;
@@ -1069,74 +1779,39 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
xpad->mapping |= MAP_STICKS_TO_NULL;
}
- xpad->dev = input_dev;
- usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
- strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
-
- input_dev->name = xpad_device[i].name;
- input_dev->phys = xpad->phys;
- usb_to_input_id(udev, &input_dev->id);
- input_dev->dev.parent = &intf->dev;
-
- input_set_drvdata(input_dev, xpad);
-
- input_dev->open = xpad_open;
- input_dev->close = xpad_close;
-
- input_dev->evbit[0] = BIT_MASK(EV_KEY);
-
- if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
- input_dev->evbit[0] |= BIT_MASK(EV_ABS);
- /* set up axes */
- for (i = 0; xpad_abs[i] >= 0; i++)
- xpad_set_up_abs(input_dev, xpad_abs[i]);
+ if (xpad->xtype == XTYPE_XBOXONE &&
+ intf->cur_altsetting->desc.bInterfaceNumber != 0) {
+ /*
+ * The Xbox One controller lists three interfaces all with the
+ * same interface class, subclass and protocol. Differentiate by
+ * interface number.
+ */
+ error = -ENODEV;
+ goto err_free_in_urb;
}
- /* set up standard buttons */
- for (i = 0; xpad_common_btn[i] >= 0; i++)
- __set_bit(xpad_common_btn[i], input_dev->keybit);
+ ep_irq_in = ep_irq_out = NULL;
- /* set up model-specific ones */
- if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
- xpad->xtype == XTYPE_XBOXONE) {
- for (i = 0; xpad360_btn[i] >= 0; i++)
- __set_bit(xpad360_btn[i], input_dev->keybit);
- } else {
- for (i = 0; xpad_btn[i] >= 0; i++)
- __set_bit(xpad_btn[i], input_dev->keybit);
- }
+ for (i = 0; i < 2; i++) {
+ struct usb_endpoint_descriptor *ep =
+ &intf->cur_altsetting->endpoint[i].desc;
- if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
- for (i = 0; xpad_btn_pad[i] >= 0; i++)
- __set_bit(xpad_btn_pad[i], input_dev->keybit);
- } else {
- for (i = 0; xpad_abs_pad[i] >= 0; i++)
- xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
+ if (usb_endpoint_xfer_int(ep)) {
+ if (usb_endpoint_dir_in(ep))
+ ep_irq_in = ep;
+ else
+ ep_irq_out = ep;
+ }
}
- if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
- for (i = 0; xpad_btn_triggers[i] >= 0; i++)
- __set_bit(xpad_btn_triggers[i], input_dev->keybit);
- } else {
- for (i = 0; xpad_abs_triggers[i] >= 0; i++)
- xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
+ if (!ep_irq_in || !ep_irq_out) {
+ error = -ENODEV;
+ goto err_free_in_urb;
}
- error = xpad_init_output(intf, xpad);
+ error = xpad_init_output(intf, xpad, ep_irq_out);
if (error)
- goto fail3;
-
- error = xpad_init_ff(xpad);
- if (error)
- goto fail4;
-
- error = xpad_led_probe(xpad);
- if (error)
- goto fail5;
-
- /* Xbox One controller has in/out endpoints swapped. */
- ep_irq_in_idx = xpad->xtype == XTYPE_XBOXONE ? 1 : 0;
- ep_irq_in = &intf->cur_altsetting->endpoint[ep_irq_in_idx].desc;
+ goto err_free_in_urb;
usb_fill_int_urb(xpad->irq_in, udev,
usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
@@ -1145,59 +1820,9 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
xpad->irq_in->transfer_dma = xpad->idata_dma;
xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- error = input_register_device(xpad->dev);
- if (error)
- goto fail6;
-
usb_set_intfdata(intf, xpad);
if (xpad->xtype == XTYPE_XBOX360W) {
- /*
- * Setup the message to set the LEDs on the
- * controller when it shows up
- */
- xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL);
- if (!xpad->bulk_out) {
- error = -ENOMEM;
- goto fail7;
- }
-
- xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL);
- if (!xpad->bdata) {
- error = -ENOMEM;
- goto fail8;
- }
-
- xpad->bdata[2] = 0x08;
- switch (intf->cur_altsetting->desc.bInterfaceNumber) {
- case 0:
- xpad->bdata[3] = 0x42;
- break;
- case 2:
- xpad->bdata[3] = 0x43;
- break;
- case 4:
- xpad->bdata[3] = 0x44;
- break;
- case 6:
- xpad->bdata[3] = 0x45;
- }
-
- ep_irq_in = &intf->cur_altsetting->endpoint[1].desc;
- if (usb_endpoint_is_bulk_out(ep_irq_in)) {
- usb_fill_bulk_urb(xpad->bulk_out, udev,
- usb_sndbulkpipe(udev,
- ep_irq_in->bEndpointAddress),
- xpad->bdata, XPAD_PKT_LEN,
- xpad_bulk_out, xpad);
- } else {
- usb_fill_int_urb(xpad->bulk_out, udev,
- usb_sndintpipe(udev,
- ep_irq_in->bEndpointAddress),
- xpad->bdata, XPAD_PKT_LEN,
- xpad_bulk_out, xpad, 0);
- }
-
/*
* Submit the int URB immediately rather than waiting for open
* because we get status messages from the device whether
@@ -1205,58 +1830,127 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
* exactly the message that a controller has arrived that
* we're waiting for.
*/
- xpad->irq_in->dev = xpad->udev;
- error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
+ error = xpad360w_start_input(xpad);
if (error)
- goto fail9;
+ goto err_deinit_output;
+ /*
+ * Wireless controllers require RESET_RESUME to work properly
+ * after suspend. Ideally this quirk should be in usb core
+ * quirk list, but we have too many vendors producing these
+ * controllers and we'd need to maintain 2 identical lists
+ * here in this driver and in usb core.
+ */
+ udev->quirks |= USB_QUIRK_RESET_RESUME;
+ } else {
+ error = xpad_init_input(xpad);
+ if (error)
+ goto err_deinit_output;
}
-
return 0;
- fail9: kfree(xpad->bdata);
- fail8: usb_free_urb(xpad->bulk_out);
- fail7: input_unregister_device(input_dev);
- input_dev = NULL;
- fail6: xpad_led_disconnect(xpad);
- fail5: if (input_dev)
- input_ff_destroy(input_dev);
- fail4: xpad_deinit_output(xpad);
- fail3: usb_free_urb(xpad->irq_in);
- fail2: usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
- fail1: input_free_device(input_dev);
+err_deinit_output:
+ xpad_deinit_output(xpad);
+err_free_in_urb:
+ usb_free_urb(xpad->irq_in);
+err_free_idata:
+ usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
+err_free_mem:
kfree(xpad);
return error;
-
}
static void xpad_disconnect(struct usb_interface *intf)
{
- struct usb_xpad *xpad = usb_get_intfdata (intf);
+ struct usb_xpad *xpad = usb_get_intfdata(intf);
- xpad_led_disconnect(xpad);
- input_unregister_device(xpad->dev);
- xpad_deinit_output(xpad);
+ if (xpad->xtype == XTYPE_XBOX360W)
+ xpad360w_stop_input(xpad);
- if (xpad->xtype == XTYPE_XBOX360W) {
- usb_kill_urb(xpad->bulk_out);
- usb_free_urb(xpad->bulk_out);
- usb_kill_urb(xpad->irq_in);
- }
+ xpad_deinit_input(xpad);
+
+ /*
+ * Now that both input device and LED device are gone we can
+ * stop output URB.
+ */
+ xpad_stop_output(xpad);
+
+ xpad_deinit_output(xpad);
usb_free_urb(xpad->irq_in);
usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
xpad->idata, xpad->idata_dma);
- kfree(xpad->bdata);
kfree(xpad);
usb_set_intfdata(intf, NULL);
}
+static int xpad_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct usb_xpad *xpad = usb_get_intfdata(intf);
+ struct input_dev *input = xpad->dev;
+
+ if (xpad->xtype == XTYPE_XBOX360W) {
+ /*
+ * Wireless controllers always listen to input so
+ * they are notified when controller shows up
+ * or goes away.
+ */
+ xpad360w_stop_input(xpad);
+
+ /*
+ * The wireless adapter is going off now, so the
+ * gamepads are going to become disconnected.
+ * Unless explicitly disabled, power them down
+ * so they don't just sit there flashing.
+ */
+ if (auto_poweroff && xpad->pad_present)
+ xpad360w_poweroff_controller(xpad);
+ } else {
+ mutex_lock(&input->mutex);
+ if (input->users)
+ xpad_stop_input(xpad);
+ mutex_unlock(&input->mutex);
+ }
+
+ xpad_stop_output(xpad);
+
+ return 0;
+}
+
+static int xpad_resume(struct usb_interface *intf)
+{
+ struct usb_xpad *xpad = usb_get_intfdata(intf);
+ struct input_dev *input = xpad->dev;
+ int retval = 0;
+
+ if (xpad->xtype == XTYPE_XBOX360W) {
+ retval = xpad360w_start_input(xpad);
+ } else {
+ mutex_lock(&input->mutex);
+ if (input->users) {
+ retval = xpad_start_input(xpad);
+ } else if (xpad->xtype == XTYPE_XBOXONE) {
+ /*
+ * Even if there are no users, we'll send Xbox One pads
+ * the startup sequence so they don't sit there and
+ * blink until somebody opens the input device again.
+ */
+ retval = xpad_start_xbox_one(xpad);
+ }
+ mutex_unlock(&input->mutex);
+ }
+
+ return retval;
+}
+
static struct usb_driver xpad_driver = {
.name = "xpad",
.probe = xpad_probe,
.disconnect = xpad_disconnect,
+ .suspend = xpad_suspend,
+ .resume = xpad_resume,
+ .reset_resume = xpad_resume,
.id_table = xpad_table,
};
diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c
index 063898d429c7..b5304e264881 100644
--- a/drivers/input/misc/ims-pcu.c
+++ b/drivers/input/misc/ims-pcu.c
@@ -1871,7 +1871,7 @@ static int ims_pcu_identify_type(struct ims_pcu *pcu, u8 *device_id)
static int ims_pcu_init_application_mode(struct ims_pcu *pcu)
{
- static atomic_t device_no = ATOMIC_INIT(0);
+ static atomic_t device_no = ATOMIC_INIT(-1);
const struct ims_pcu_device_info *info;
int error;
@@ -1902,7 +1902,7 @@ static int ims_pcu_init_application_mode(struct ims_pcu *pcu)
}
/* Device appears to be operable, complete initialization */
- pcu->device_no = atomic_inc_return(&device_no) - 1;
+ pcu->device_no = atomic_inc_return(&device_no);
/*
* PCU-B devices, both GEN_1 and GEN_2 do not have OFN sensor
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index d399b8b0f000..a05a5179da32 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -514,7 +514,7 @@ static void serio_release_port(struct device *dev)
*/
static void serio_init_port(struct serio *serio)
{
- static atomic_t serio_no = ATOMIC_INIT(0);
+ static atomic_t serio_no = ATOMIC_INIT(-1);
__module_get(THIS_MODULE);
@@ -525,7 +525,7 @@ static void serio_init_port(struct serio *serio)
mutex_init(&serio->drv_mutex);
device_initialize(&serio->dev);
dev_set_name(&serio->dev, "serio%lu",
- (unsigned long)atomic_inc_return(&serio_no) - 1);
+ (unsigned long)atomic_inc_return(&serio_no));
serio->dev.bus = &serio_bus;
serio->dev.release = serio_release_port;
serio->dev.groups = serio_device_attr_groups;
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index c9a02fe57576..71ef5d65a0c6 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -292,7 +292,7 @@ static irqreturn_t serio_raw_interrupt(struct serio *serio, unsigned char data,
static int serio_raw_connect(struct serio *serio, struct serio_driver *drv)
{
- static atomic_t serio_raw_no = ATOMIC_INIT(0);
+ static atomic_t serio_raw_no = ATOMIC_INIT(-1);
struct serio_raw *serio_raw;
int err;
@@ -303,7 +303,7 @@ static int serio_raw_connect(struct serio *serio, struct serio_driver *drv)
}
snprintf(serio_raw->name, sizeof(serio_raw->name),
- "serio_raw%ld", (long)atomic_inc_return(&serio_raw_no) - 1);
+ "serio_raw%ld", (long)atomic_inc_return(&serio_raw_no));
kref_init(&serio_raw->kref);
INIT_LIST_HEAD(&serio_raw->client_list);
init_waitqueue_head(&serio_raw->wait);
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 85db2a5e7878..f78577693937 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -343,6 +343,34 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
}
EXPORT_SYMBOL_GPL(can_put_echo_skb);
+struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr)
+{
+ struct can_priv *priv = netdev_priv(dev);
+ struct sk_buff *skb = priv->echo_skb[idx];
+ struct canfd_frame *cf;
+
+ if (idx >= priv->echo_skb_max) {
+ netdev_err(dev, "%s: BUG! Trying to access can_priv::echo_skb out of bounds (%u/max %u)\n",
+ __func__, idx, priv->echo_skb_max);
+ return NULL;
+ }
+
+ if (!skb) {
+ netdev_err(dev, "%s: BUG! Trying to echo non existing skb: can_priv::echo_skb[%u]\n",
+ __func__, idx);
+ return NULL;
+ }
+
+ /* Using "struct canfd_frame::len" for the frame
+ * length is supported on both CAN and CANFD frames.
+ */
+ cf = (struct canfd_frame *)skb->data;
+ *len_ptr = cf->len;
+ priv->echo_skb[idx] = NULL;
+
+ return skb;
+}
+
/*
* Get the skb from the stack and loop it back locally
*
@@ -352,22 +380,16 @@ EXPORT_SYMBOL_GPL(can_put_echo_skb);
*/
unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx)
{
- struct can_priv *priv = netdev_priv(dev);
-
- BUG_ON(idx >= priv->echo_skb_max);
-
- if (priv->echo_skb[idx]) {
- struct sk_buff *skb = priv->echo_skb[idx];
- struct can_frame *cf = (struct can_frame *)skb->data;
- u8 dlc = cf->can_dlc;
+ struct sk_buff *skb;
+ u8 len;
- netif_rx(priv->echo_skb[idx]);
- priv->echo_skb[idx] = NULL;
+ skb = __can_get_echo_skb(dev, idx, &len);
+ if (!skb)
+ return 0;
- return dlc;
- }
+ netif_rx(skb);
- return 0;
+ return len;
}
EXPORT_SYMBOL_GPL(can_get_echo_skb);
diff --git a/drivers/net/wireless/cw1200/wsm.c b/drivers/net/wireless/cw1200/wsm.c
index 9e0ca3048657..a5ac992670e8 100644
--- a/drivers/net/wireless/cw1200/wsm.c
+++ b/drivers/net/wireless/cw1200/wsm.c
@@ -1807,16 +1807,18 @@ static int wsm_buf_reserve(struct wsm_buf *buf, size_t extra_size)
{
size_t pos = buf->data - buf->begin;
size_t size = pos + extra_size;
+ u8 *tmp;
size = round_up(size, FWLOAD_BLOCK_SIZE);
- buf->begin = krealloc(buf->begin, size, GFP_KERNEL | GFP_DMA);
- if (buf->begin) {
- buf->data = &buf->begin[pos];
- buf->end = &buf->begin[size];
- return 0;
- } else {
- buf->end = buf->data = buf->begin;
+ tmp = krealloc(buf->begin, size, GFP_KERNEL | GFP_DMA);
+ if (!tmp) {
+ wsm_buf_deinit(buf);
return -ENOMEM;
}
+
+ buf->begin = tmp;
+ buf->data = &buf->begin[pos];
+ buf->end = &buf->begin[size];
+ return 0;
}
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 7bc28c8d2832..4bd4f185102e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -687,6 +687,11 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
srb_t *sp;
int rval;
+ if (unlikely(test_bit(UNLOADING, &base_vha->dpc_flags))) {
+ cmd->result = DID_NO_CONNECT << 16;
+ goto qc24_fail_command;
+ }
+
if (ha->flags.eeh_busy) {
if (ha->flags.pci_channel_io_perm_failure) {
ql_dbg(ql_dbg_aer, vha, 0x9010,
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index 42c459a9d3fe..ce5234555cc9 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -45,6 +45,7 @@
#define QUERY_DESC_MIN_SIZE 2
#define QUERY_OSF_SIZE (GENERAL_UPIU_REQUEST_SIZE - \
(sizeof(struct utp_upiu_header)))
+#define RESPONSE_UPIU_SENSE_DATA_LENGTH 18
#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
cpu_to_be32((byte3 << 24) | (byte2 << 16) |\
@@ -383,7 +384,7 @@ struct utp_cmd_rsp {
__be32 residual_transfer_count;
__be32 reserved[4];
__be16 sense_data_len;
- u8 sense_data[18];
+ u8 sense_data[RESPONSE_UPIU_SENSE_DATA_LENGTH];
};
/**
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 39a4e61bf8d2..e8f3033d991b 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -570,6 +570,21 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
start:
switch (hba->clk_gating.state) {
case CLKS_ON:
+ /*
+ * Wait for the ungate work to complete if in progress.
+ * Though the clocks may be in ON state, the link could
+ * still be in hibner8 state if hibern8 is allowed
+ * during clock gating.
+ * Make sure we exit hibern8 state also in addition to
+ * clocks being ON.
+ */
+ if (ufshcd_can_hibern8_during_gating(hba) &&
+ ufshcd_is_link_hibern8(hba)) {
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ flush_work(&hba->clk_gating.ungate_work);
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ goto start;
+ }
break;
case REQ_CLKS_OFF:
if (cancel_delayed_work(&hba->clk_gating.gate_work)) {
@@ -796,10 +811,14 @@ static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp)
int len;
if (lrbp->sense_buffer &&
ufshcd_get_rsp_upiu_data_seg_len(lrbp->ucd_rsp_ptr)) {
+ int len_to_copy;
+
len = be16_to_cpu(lrbp->ucd_rsp_ptr->sr.sense_data_len);
+ len_to_copy = min_t(int, RESPONSE_UPIU_SENSE_DATA_LENGTH, len);
+
memcpy(lrbp->sense_buffer,
lrbp->ucd_rsp_ptr->sr.sense_data,
- min_t(int, len, SCSI_SENSE_BUFFERSIZE));
+ min_t(int, len_to_copy, SCSI_SENSE_BUFFERSIZE));
}
}
@@ -5161,7 +5180,10 @@ EXPORT_SYMBOL(ufshcd_system_suspend);
int ufshcd_system_resume(struct ufs_hba *hba)
{
- if (!hba || !hba->is_powered || pm_runtime_suspended(hba->dev))
+ if (!hba)
+ return -EINVAL;
+
+ if (!hba->is_powered || pm_runtime_suspended(hba->dev))
/*
* Let the runtime resume take care of resuming
* if runtime suspended.
@@ -5182,7 +5204,10 @@ EXPORT_SYMBOL(ufshcd_system_resume);
*/
int ufshcd_runtime_suspend(struct ufs_hba *hba)
{
- if (!hba || !hba->is_powered)
+ if (!hba)
+ return -EINVAL;
+
+ if (!hba->is_powered)
return 0;
return ufshcd_suspend(hba, UFS_RUNTIME_PM);
@@ -5212,10 +5237,13 @@ EXPORT_SYMBOL(ufshcd_runtime_suspend);
*/
int ufshcd_runtime_resume(struct ufs_hba *hba)
{
- if (!hba || !hba->is_powered)
+ if (!hba)
+ return -EINVAL;
+
+ if (!hba->is_powered)
return 0;
- else
- return ufshcd_resume(hba, UFS_RUNTIME_PM);
+
+ return ufshcd_resume(hba, UFS_RUNTIME_PM);
}
EXPORT_SYMBOL(ufshcd_runtime_resume);
@@ -5378,15 +5406,47 @@ static int ufshcd_devfreq_target(struct device *dev,
{
int err = 0;
struct ufs_hba *hba = dev_get_drvdata(dev);
+ bool release_clk_hold = false;
+ unsigned long irq_flags;
if (!ufshcd_is_clkscaling_enabled(hba))
return -EINVAL;
+ spin_lock_irqsave(hba->host->host_lock, irq_flags);
+ if (ufshcd_eh_in_progress(hba)) {
+ spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+ return 0;
+ }
+
+ if (ufshcd_is_clkgating_allowed(hba) &&
+ (hba->clk_gating.state != CLKS_ON)) {
+ if (cancel_delayed_work(&hba->clk_gating.gate_work)) {
+ /* hold the vote until the scaling work is completed */
+ hba->clk_gating.active_reqs++;
+ release_clk_hold = true;
+ hba->clk_gating.state = CLKS_ON;
+ } else {
+ /*
+ * Clock gating work seems to be running in parallel
+ * hence skip scaling work to avoid deadlock between
+ * current scaling work and gating work.
+ */
+ spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+ return 0;
+ }
+ }
+ spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+
if (*freq == UINT_MAX)
err = ufshcd_scale_clks(hba, true);
else if (*freq == 0)
err = ufshcd_scale_clks(hba, false);
+ spin_lock_irqsave(hba->host->host_lock, irq_flags);
+ if (release_clk_hold)
+ __ufshcd_release(hba);
+ spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
+
return err;
}
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index f53682bb30cf..4d46a1cb851b 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -188,15 +188,29 @@ static int receive_room(struct tty_struct *tty)
return left;
}
+/* If we are not echoing the data, perhaps this is a secret so erase it */
+static inline void zero_buffer(struct tty_struct *tty, u8 *buffer, int size)
+{
+ bool icanon = !!L_ICANON(tty);
+ bool no_echo = !L_ECHO(tty);
+
+ if (icanon && no_echo)
+ memset(buffer, 0x00, size);
+}
+
static inline int tty_copy_to_user(struct tty_struct *tty,
void __user *to,
- const void *from,
+ void *from,
unsigned long n)
{
struct n_tty_data *ldata = tty->disc_data;
+ int retval;
tty_audit_add_data(tty, from, n, ldata->icanon);
- return copy_to_user(to, from, n);
+ retval = copy_to_user(to, from, n);
+ if (!retval)
+ zero_buffer(tty, from, n);
+ return retval;
}
/**
@@ -2006,6 +2020,7 @@ static int copy_from_read_buf(struct tty_struct *tty,
is_eof = n == 1 && read_buf(ldata, tail) == EOF_CHAR(tty);
tty_audit_add_data(tty, read_buf_addr(ldata, tail), n,
ldata->icanon);
+ zero_buffer(tty, read_buf_addr(ldata, tail), n);
ldata->read_tail += n;
/* Turn single EOF into zero-length read */
if (L_EXTPROC(tty) && ldata->icanon && is_eof && !read_cnt(ldata))
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 143deb62467d..0d3fc2dae23a 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -415,6 +415,8 @@ receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
disc->ops->receive_buf(tty, p, f, count);
}
head->read += count;
+ if (count > 0)
+ memset(p, 0, count);
return count;
}
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 9a47a9c8ebb4..2391dac86c58 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2765,7 +2765,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
USB_PORT_FEAT_C_BH_PORT_RESET);
usb_clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_PORT_LINK_STATE);
- usb_clear_port_feature(hub->hdev, port1,
+
+ if (udev)
+ usb_clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_CONNECTION);
/*
diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c
index 4f1151088ebe..cfe4cf6486af 100644
--- a/fs/9p/vfs_dir.c
+++ b/fs/9p/vfs_dir.c
@@ -75,15 +75,6 @@ static inline int dt_type(struct p9_wstat *mistat)
return rettype;
}
-static void p9stat_init(struct p9_wstat *stbuf)
-{
- stbuf->name = NULL;
- stbuf->uid = NULL;
- stbuf->gid = NULL;
- stbuf->muid = NULL;
- stbuf->extension = NULL;
-}
-
/**
* v9fs_alloc_rdir_buf - Allocate buffer used for read and readdir
* @filp: opened file structure
@@ -136,12 +127,10 @@ static int v9fs_dir_readdir(struct file *file, struct dir_context *ctx)
rdir->tail = err;
}
while (rdir->head < rdir->tail) {
- p9stat_init(&st);
err = p9stat_read(fid->clnt, rdir->buf + rdir->head,
rdir->tail - rdir->head, &st);
if (err) {
p9_debug(P9_DEBUG_VFS, "returned %d\n", err);
- p9stat_free(&st);
return -EIO;
}
reclen = st.size+2;
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index 90bc079d9982..0ee38b284ad7 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -349,7 +349,8 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
s->s_magic = BFS_MAGIC;
- if (le32_to_cpu(bfs_sb->s_start) > le32_to_cpu(bfs_sb->s_end)) {
+ if (le32_to_cpu(bfs_sb->s_start) > le32_to_cpu(bfs_sb->s_end) ||
+ le32_to_cpu(bfs_sb->s_start) < BFS_BSIZE) {
printf("Superblock is corrupted\n");
goto out1;
}
@@ -358,9 +359,11 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent)
sizeof(struct bfs_inode)
+ BFS_ROOT_INO - 1;
imap_len = (info->si_lasti / 8) + 1;
- info->si_imap = kzalloc(imap_len, GFP_KERNEL);
- if (!info->si_imap)
+ info->si_imap = kzalloc(imap_len, GFP_KERNEL | __GFP_NOWARN);
+ if (!info->si_imap) {
+ printf("Cannot allocate %u bytes\n", imap_len);
goto out1;
+ }
for (i = 0; i < BFS_ROOT_INO; i++)
set_bit(i, info->si_imap);
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index a4569cafa3bb..a65ef669618a 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -71,13 +71,13 @@ static struct gfs2_sbd *init_sbd(struct super_block *sb)
if (!sdp)
return NULL;
- sb->s_fs_info = sdp;
sdp->sd_vfs = sb;
sdp->sd_lkstats = alloc_percpu(struct gfs2_pcpu_lkstats);
if (!sdp->sd_lkstats) {
kfree(sdp);
return NULL;
}
+ sb->s_fs_info = sdp;
set_bit(SDF_NOJOURNALID, &sdp->sd_flags);
gfs2_tune_init(&sdp->sd_tune);
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 49093889362c..45c2668ea0d8 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -148,6 +148,7 @@ void can_bus_off(struct net_device *dev);
void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
unsigned int idx);
+struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr);
unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx);
void can_free_echo_skb(struct net_device *dev, unsigned int idx);
diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c
index 681c8b42e013..1c6b7055f11f 100644
--- a/kernel/debug/kdb/kdb_io.c
+++ b/kernel/debug/kdb/kdb_io.c
@@ -215,7 +215,7 @@ static char *kdb_read(char *buffer, size_t bufsize)
int count;
int i;
int diag, dtab_count;
- int key;
+ int key, buf_size, ret;
diag = kdbgetintenv("DTABCOUNT", &dtab_count);
@@ -335,9 +335,8 @@ poll_again:
else
p_tmp = tmpbuffer;
len = strlen(p_tmp);
- count = kallsyms_symbol_complete(p_tmp,
- sizeof(tmpbuffer) -
- (p_tmp - tmpbuffer));
+ buf_size = sizeof(tmpbuffer) - (p_tmp - tmpbuffer);
+ count = kallsyms_symbol_complete(p_tmp, buf_size);
if (tab == 2 && count > 0) {
kdb_printf("\n%d symbols are found.", count);
if (count > dtab_count) {
@@ -349,9 +348,13 @@ poll_again:
}
kdb_printf("\n");
for (i = 0; i < count; i++) {
- if (WARN_ON(!kallsyms_symbol_next(p_tmp, i)))
+ ret = kallsyms_symbol_next(p_tmp, i, buf_size);
+ if (WARN_ON(!ret))
break;
- kdb_printf("%s ", p_tmp);
+ if (ret != -E2BIG)
+ kdb_printf("%s ", p_tmp);
+ else
+ kdb_printf("%s... ", p_tmp);
*(p_tmp + len) = '\0';
}
if (i >= dtab_count)
diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h
index 7afd3c8c41d5..439f1c8b1193 100644
--- a/kernel/debug/kdb/kdb_private.h
+++ b/kernel/debug/kdb/kdb_private.h
@@ -83,7 +83,7 @@ typedef struct __ksymtab {
unsigned long sym_start;
unsigned long sym_end;
} kdb_symtab_t;
-extern int kallsyms_symbol_next(char *prefix_name, int flag);
+extern int kallsyms_symbol_next(char *prefix_name, int flag, int buf_size);
extern int kallsyms_symbol_complete(char *prefix_name, int max_len);
/* Exported Symbols for kernel loadable modules to use. */
diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c
index d35cc2d3a4cc..2aed4a33521b 100644
--- a/kernel/debug/kdb/kdb_support.c
+++ b/kernel/debug/kdb/kdb_support.c
@@ -221,11 +221,13 @@ int kallsyms_symbol_complete(char *prefix_name, int max_len)
* Parameters:
* prefix_name prefix of a symbol name to lookup
* flag 0 means search from the head, 1 means continue search.
+ * buf_size maximum length that can be written to prefix_name
+ * buffer
* Returns:
* 1 if a symbol matches the given prefix.
* 0 if no string found
*/
-int kallsyms_symbol_next(char *prefix_name, int flag)
+int kallsyms_symbol_next(char *prefix_name, int flag, int buf_size)
{
int prefix_len = strlen(prefix_name);
static loff_t pos;
@@ -235,10 +237,8 @@ int kallsyms_symbol_next(char *prefix_name, int flag)
pos = 0;
while ((name = kdb_walk_kallsyms(&pos))) {
- if (strncmp(name, prefix_name, prefix_len) == 0) {
- strncpy(prefix_name, name, strlen(name)+1);
- return 1;
- }
+ if (!strncmp(name, prefix_name, prefix_len))
+ return strscpy(prefix_name, name, buf_size);
}
return 0;
}
diff --git a/mm/shmem.c b/mm/shmem.c
index 371d5eca80ed..64c33e3dbe69 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1805,9 +1805,7 @@ static loff_t shmem_file_llseek(struct file *file, loff_t offset, int whence)
mutex_lock(&inode->i_mutex);
/* We're holding i_mutex so we can access i_size directly */
- if (offset < 0)
- offset = -EINVAL;
- else if (offset >= inode->i_size)
+ if (offset < 0 || offset >= inode->i_size)
offset = -ENXIO;
else {
start = offset >> PAGE_CACHE_SHIFT;
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index 12cbc988f4fb..ee7bedf89b7f 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -726,7 +726,6 @@ static int llc_ui_recvmsg(struct kiocb *iocb, struct socket *sock,
struct sk_buff *skb = NULL;
struct sock *sk = sock->sk;
struct llc_sock *llc = llc_sk(sk);
- unsigned long cpu_flags;
size_t copied = 0;
u32 peek_seq = 0;
u32 *seq, skb_len;
@@ -852,9 +851,8 @@ static int llc_ui_recvmsg(struct kiocb *iocb, struct socket *sock,
goto copy_uaddr;
if (!(flags & MSG_PEEK)) {
- spin_lock_irqsave(&sk->sk_receive_queue.lock, cpu_flags);
- sk_eat_skb(sk, skb);
- spin_unlock_irqrestore(&sk->sk_receive_queue.lock, cpu_flags);
+ skb_unlink(skb, &sk->sk_receive_queue);
+ kfree_skb(skb);
*seq = 0;
}
@@ -875,9 +873,8 @@ copy_uaddr:
llc_cmsg_rcv(msg, skb);
if (!(flags & MSG_PEEK)) {
- spin_lock_irqsave(&sk->sk_receive_queue.lock, cpu_flags);
- sk_eat_skb(sk, skb);
- spin_unlock_irqrestore(&sk->sk_receive_queue.lock, cpu_flags);
+ skb_unlink(skb, &sk->sk_receive_queue);
+ kfree_skb(skb);
*seq = 0;
}
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 16911a84f850..03689b97ea78 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -487,8 +487,9 @@ void sctp_assoc_set_primary(struct sctp_association *asoc,
void sctp_assoc_rm_peer(struct sctp_association *asoc,
struct sctp_transport *peer)
{
- struct list_head *pos;
- struct sctp_transport *transport;
+ struct sctp_transport *transport;
+ struct list_head *pos;
+ struct sctp_chunk *ch;
pr_debug("%s: association:%p addr:%pISpc\n",
__func__, asoc, &peer->ipaddr.sa);
@@ -544,7 +545,6 @@ void sctp_assoc_rm_peer(struct sctp_association *asoc,
*/
if (!list_empty(&peer->transmitted)) {
struct sctp_transport *active = asoc->peer.active_path;
- struct sctp_chunk *ch;
/* Reset the transport of each chunk on this list */
list_for_each_entry(ch, &peer->transmitted,
@@ -566,6 +566,10 @@ void sctp_assoc_rm_peer(struct sctp_association *asoc,
sctp_transport_hold(active);
}
+ list_for_each_entry(ch, &asoc->outqueue.out_chunk_list, list)
+ if (ch->transport == peer)
+ ch->transport = NULL;
+
asoc->peer.transport_count--;
sctp_transport_free(peer);
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index 6f6b829c9e8e..42e93bf496e7 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -272,13 +272,7 @@ static bool generic_key_to_expire(struct rpc_cred *cred)
{
struct auth_cred *acred = &container_of(cred, struct generic_cred,
gc_base)->acred;
- bool ret;
-
- get_rpccred(cred);
- ret = test_bit(RPC_CRED_KEY_EXPIRE_SOON, &acred->ac_flags);
- put_rpccred(cred);
-
- return ret;
+ return test_bit(RPC_CRED_KEY_EXPIRE_SOON, &acred->ac_flags);
}
static const struct rpc_credops generic_credops = {
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 1bd4ba6b6aa4..23d6b4c7eafe 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -980,6 +980,7 @@ static int unix_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
unsigned int hash;
struct unix_address *addr;
struct hlist_head *list;
+ struct path path = { NULL, NULL };
err = -EINVAL;
if (sunaddr->sun_family != AF_UNIX)
@@ -995,9 +996,20 @@ static int unix_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
goto out;
addr_len = err;
+ if (sun_path[0]) {
+ umode_t mode = S_IFSOCK |
+ (SOCK_INODE(sock)->i_mode & ~current_umask());
+ err = unix_mknod(sun_path, mode, &path);
+ if (err) {
+ if (err == -EEXIST)
+ err = -EADDRINUSE;
+ goto out;
+ }
+ }
+
err = mutex_lock_interruptible(&u->readlock);
if (err)
- goto out;
+ goto out_put;
err = -EINVAL;
if (u->addr)
@@ -1014,16 +1026,6 @@ static int unix_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
atomic_set(&addr->refcnt, 1);
if (sun_path[0]) {
- struct path path;
- umode_t mode = S_IFSOCK |
- (SOCK_INODE(sock)->i_mode & ~current_umask());
- err = unix_mknod(sun_path, mode, &path);
- if (err) {
- if (err == -EEXIST)
- err = -EADDRINUSE;
- unix_release_addr(addr);
- goto out_up;
- }
addr->hash = UNIX_HASH_SIZE;
hash = d_backing_inode(path.dentry)->i_ino & (UNIX_HASH_SIZE-1);
spin_lock(&unix_table_lock);
@@ -1050,6 +1052,9 @@ out_unlock:
spin_unlock(&unix_table_lock);
out_up:
mutex_unlock(&u->readlock);
+out_put:
+ if (err)
+ path_put(&path);
out:
return err;
}
Powered by blists - more mailing lists