lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Sun, 2 Dec 2018 09:47:17 +0100
From:   Lukasz Majewski <lukma@...x.de>
To:     Mark Brown <broonie@...nel.org>
Cc:     Mark Rutland <mark.rutland@....com>, linux-spi@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Esben Haabendal <eha@...f.com>,
        Martin Hundebøll <martin@...nix.com>,
        Andrey Smirnov <andrew.smirnov@...il.com>
Subject: Re: [PATCHv3] ARM: dspi: Provide support for DSPI slave mode
 operation (Vybryd vf610)

Dear All,

> The NXP's Vybryd vf610 can work as a SPI slave device (the CS and
> clock signals are provided by master).
> 
> It is possible to specify a single device to work in that mode. As we
> do use DMA for transferring data, the RX channel must be prepared for
> incoming data.
> Moreover, in slave mode we just set a subset of control fields in
> configuration registers (CTAR0, PUSHR).
> 
> For testing the spidev_test program has been used.
> Test script for this patch can be found here:
> https://github.com/lmajewski/tests-spi/blob/master/tests/spi/spi_tests.sh

Gentle ping on this patch. Comments are more than welcome.

> 
> Signed-off-by: Lukasz Majewski <lukma@...x.de>
> ---
> Changes for v3:
> 
> - Rebase to v4.20-rc2 (no code changes needed)
> 
> Changes for v2:
> 
> - Remove patch which adds extra NXP specific DTS property to support
> slave mode and reuse the generic one (spi-slave)
> - Remove patch which brings back the mcr_register local copy. It is
> not needed as generic SPI slave infrastructure is used.
> - Rewrite the code to use spi_controller_is_slave() helper functions
> ---
>  drivers/spi/spi-fsl-dspi.c | 40
> ++++++++++++++++++++++++++++++---------- 1 file changed, 30
> insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
> index 3082e72e4f6c..94b6a9690062 100644
> --- a/drivers/spi/spi-fsl-dspi.c
> +++ b/drivers/spi/spi-fsl-dspi.c
> @@ -233,6 +233,9 @@ static u32 dspi_pop_tx_pushr(struct fsl_dspi
> *dspi) {
>  	u16 cmd = dspi->tx_cmd, data = dspi_pop_tx(dspi);
>  
> +	if (spi_controller_is_slave(dspi->master))
> +		return data;
> +
>  	if (dspi->len > 0)
>  		cmd |= SPI_PUSHR_CMD_CONT;
>  	return cmd << 16 | data;
> @@ -329,6 +332,11 @@ static int dspi_next_xfer_dma_submit(struct
> fsl_dspi *dspi) dma_async_issue_pending(dma->chan_rx);
>  	dma_async_issue_pending(dma->chan_tx);
>  
> +	if (spi_controller_is_slave(dspi->master)) {
> +
> wait_for_completion_interruptible(&dspi->dma->cmd_rx_complete);
> +		return 0;
> +	}
> +
>  	time_left =
> wait_for_completion_timeout(&dspi->dma->cmd_tx_complete,
> DMA_COMPLETION_TIMEOUT); if (time_left == 0) {
> @@ -798,14 +806,18 @@ static int dspi_setup(struct spi_device *spi)
>  	ns_delay_scale(&pasc, &asc, sck_cs_delay, clkrate);
>  
>  	chip->ctar_val = SPI_CTAR_CPOL(spi->mode & SPI_CPOL ? 1 : 0)
> -		| SPI_CTAR_CPHA(spi->mode & SPI_CPHA ? 1 : 0)
> -		| SPI_CTAR_LSBFE(spi->mode & SPI_LSB_FIRST ? 1 : 0)
> -		| SPI_CTAR_PCSSCK(pcssck)
> -		| SPI_CTAR_CSSCK(cssck)
> -		| SPI_CTAR_PASC(pasc)
> -		| SPI_CTAR_ASC(asc)
> -		| SPI_CTAR_PBR(pbr)
> -		| SPI_CTAR_BR(br);
> +		| SPI_CTAR_CPHA(spi->mode & SPI_CPHA ? 1 : 0);
> +
> +	if (!spi_controller_is_slave(dspi->master)) {
> +		chip->ctar_val |= SPI_CTAR_LSBFE(spi->mode &
> +						 SPI_LSB_FIRST ? 1 :
> 0)
> +			| SPI_CTAR_PCSSCK(pcssck)
> +			| SPI_CTAR_CSSCK(cssck)
> +			| SPI_CTAR_PASC(pasc)
> +			| SPI_CTAR_ASC(asc)
> +			| SPI_CTAR_PBR(pbr)
> +			| SPI_CTAR_BR(br);
> +	}
>  
>  	spi_set_ctldata(spi, chip);
>  
> @@ -970,8 +982,13 @@ static const struct regmap_config
> dspi_xspi_regmap_config[] = { 
>  static void dspi_init(struct fsl_dspi *dspi)
>  {
> -	regmap_write(dspi->regmap, SPI_MCR, SPI_MCR_MASTER |
> SPI_MCR_PCSIS |
> -		     (dspi->devtype_data->xspi_mode ? SPI_MCR_XSPI :
> 0));
> +	unsigned int mcr = SPI_MCR_PCSIS |
> +		(dspi->devtype_data->xspi_mode ? SPI_MCR_XSPI : 0);
> +
> +	if (!spi_controller_is_slave(dspi->master))
> +		mcr |= SPI_MCR_MASTER;
> +
> +	regmap_write(dspi->regmap, SPI_MCR, mcr);
>  	regmap_write(dspi->regmap, SPI_SR, SPI_SR_CLEAR);
>  	if (dspi->devtype_data->xspi_mode)
>  		regmap_write(dspi->regmap, SPI_CTARE(0),
> @@ -1027,6 +1044,9 @@ static int dspi_probe(struct platform_device
> *pdev) }
>  		master->bus_num = bus_num;
>  
> +		if (of_property_read_bool(np, "spi-slave"))
> +			master->slave = true;
> +
>  		dspi->devtype_data =
> of_device_get_match_data(&pdev->dev); if (!dspi->devtype_data) {
>  			dev_err(&pdev->dev, "can't get
> devtype_data\n");




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@...x.de

Content of type "application/pgp-signature" skipped

Powered by blists - more mailing lists