Message-Id: <20181202103046.29377-1-linux@rempel-privat.de>
Date:   Sun,  2 Dec 2018 11:30:45 +0100
From:   Oleksij Rempel <linux@...pel-privat.de>
To:     Ulf Hansson <ulf.hansson@...aro.org>,
        Arnd Bergmann <arnd@...db.de>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>
Cc:     Oleksij Rempel <linux@...pel-privat.de>, kernel@...gutronix.de,
        linux-mmc@...r.kernel.org, peter.wein@....de, drake@...lessm.com,
        chiu@...lessm.com, linux@...lessm.com, morling.huang@...orlink.com,
        bob@...ormicro.com, jin.tsai@...orlink.com,
        linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v6 1/2] misc: cardreader: add new Alcor Micro Cardreader PCI driver

This driver provides support for Alcor Micro AU6601 and AU6621
card readers.

This is single LUN HW and it is expected to work with following standards:
- Support SDR104 / SDR50
- MultiMedia Card (MMC)
- Memory Stick (MS)
- Memory Stick PRO (MS_Pro)

Since it is a PCIe controller, it should work on any architecture
supporting PCIe. For now, it was developed and tested only on x86_64.

This driver is a result of RE work and was created without any
documentation or real knowledge of HW internals.

Signed-off-by: Oleksij Rempel <linux@...pel-privat.de>
---
 drivers/misc/Makefile               |   2 +-
 drivers/misc/cardreader/Kconfig     |  11 +
 drivers/misc/cardreader/Makefile    |   4 +-
 drivers/misc/cardreader/alcor_pci.c | 371 ++++++++++++++++++++++++++++
 include/linux/alcor_pci.h           | 286 +++++++++++++++++++++
 5 files changed, 671 insertions(+), 3 deletions(-)
 create mode 100644 drivers/misc/cardreader/alcor_pci.c
 create mode 100644 include/linux/alcor_pci.h

diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index af22bbc3d00c..fe3134cf3008 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -57,4 +57,4 @@ obj-$(CONFIG_ASPEED_LPC_CTRL)	+= aspeed-lpc-ctrl.o
 obj-$(CONFIG_ASPEED_LPC_SNOOP)	+= aspeed-lpc-snoop.o
 obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
 obj-$(CONFIG_OCXL)		+= ocxl/
-obj-$(CONFIG_MISC_RTSX)		+= cardreader/
+obj-y		+= cardreader/
diff --git a/drivers/misc/cardreader/Kconfig b/drivers/misc/cardreader/Kconfig
index 69e815e32a8c..ed8993b5d058 100644
--- a/drivers/misc/cardreader/Kconfig
+++ b/drivers/misc/cardreader/Kconfig
@@ -1,3 +1,14 @@
+config MISC_ALCOR_PCI
+	tristate "Alcor Micro/Alcor Link PCI-E card reader"
+	depends on PCI
+	select MFD_CORE
+	help
+	  This supports for Alcor Micro PCI-Express card reader including au6601,
+	  au6621.
+	  Alcor Micro card readers support access to many types of memory cards,
+	  such as Memory Stick, Memory Stick Pro, Secure Digital and
+	  MultiMediaCard.
+
 config MISC_RTSX_PCI
 	tristate "Realtek PCI-E card reader"
 	depends on PCI
diff --git a/drivers/misc/cardreader/Makefile b/drivers/misc/cardreader/Makefile
index 9fabfcc6fa7a..9882d2a1025c 100644
--- a/drivers/misc/cardreader/Makefile
+++ b/drivers/misc/cardreader/Makefile
@@ -1,4 +1,4 @@
-rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o rts5260.o
-
+obj-$(CONFIG_MISC_ALCOR_PCI)	+= alcor_pci.o
 obj-$(CONFIG_MISC_RTSX_PCI)	+= rtsx_pci.o
+rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o rts5260.o
 obj-$(CONFIG_MISC_RTSX_USB)	+= rtsx_usb.o
diff --git a/drivers/misc/cardreader/alcor_pci.c b/drivers/misc/cardreader/alcor_pci.c
new file mode 100644
index 000000000000..6872b8e29b4d
--- /dev/null
+++ b/drivers/misc/cardreader/alcor_pci.c
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Oleksij Rempel <linux@...pel-privat.de>
+ *
+ * Driver for Alcor Micro AU6601 and AU6621 controllers
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+
+#include <linux/alcor_pci.h>
+
+#define DRV_NAME_ALCOR_PCI			"alcor_pci"
+
+static DEFINE_IDA(alcor_pci_idr);
+
+static struct mfd_cell alcor_pci_cells[] = {
+	[ALCOR_SD_CARD] = {
+		.name = DRV_NAME_ALCOR_PCI_SDMMC,
+	},
+	[ALCOR_MS_CARD] = {
+		.name = DRV_NAME_ALCOR_PCI_MS,
+	},
+};
+
+static const struct alcor_dev_cfg alcor_cfg = {
+	.dma = 0,
+};
+
+static const struct alcor_dev_cfg au6621_cfg = {
+	.dma = 1,
+};
+
+static const struct pci_device_id pci_ids[] = {
+	{ PCI_DEVICE(PCI_ID_ALCOR_MICRO, PCI_ID_AU6601),
+		.driver_data = (kernel_ulong_t)&alcor_cfg },
+	{ PCI_DEVICE(PCI_ID_ALCOR_MICRO, PCI_ID_AU6621),
+		.driver_data = (kernel_ulong_t)&au6621_cfg },
+	{ },
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+void alcor_write8(struct alcor_pci_priv *priv, u8 val, unsigned int addr)
+{
+	writeb(val, priv->iobase + addr);
+}
+EXPORT_SYMBOL_GPL(alcor_write8);
+
+void alcor_write16(struct alcor_pci_priv *priv, u16 val, unsigned int addr)
+{
+	writew(val, priv->iobase + addr);
+}
+EXPORT_SYMBOL_GPL(alcor_write16);
+
+void alcor_write32(struct alcor_pci_priv *priv, u32 val, unsigned int addr)
+{
+	writel(val, priv->iobase + addr);
+}
+EXPORT_SYMBOL_GPL(alcor_write32);
+
+void alcor_write32be(struct alcor_pci_priv *priv, u32 val, unsigned int addr)
+{
+	iowrite32be(val, priv->iobase + addr);
+}
+EXPORT_SYMBOL_GPL(alcor_write32be);
+
+u8 alcor_read8(struct alcor_pci_priv *priv, unsigned int addr)
+{
+	return readb(priv->iobase + addr);
+}
+EXPORT_SYMBOL_GPL(alcor_read8);
+
+u32 alcor_read32(struct alcor_pci_priv *priv, unsigned int addr)
+{
+	return readl(priv->iobase + addr);
+}
+EXPORT_SYMBOL_GPL(alcor_read32);
+
+u32 alcor_read32be(struct alcor_pci_priv *priv, unsigned int addr)
+{
+	return ioread32be(priv->iobase + addr);
+}
+EXPORT_SYMBOL_GPL(alcor_read32be);
+
+static int alcor_pci_find_cap_offset(struct alcor_pci_priv *priv,
+				     struct pci_dev *pci)
+{
+	int where;
+	u8 val8;
+	u32 val32;
+
+	where = ALCOR_CAP_START_OFFSET;
+	pci_read_config_byte(pci, where, &val8);
+	if (!val8)
+		return 0;
+
+	where = (int)val8;
+	while (1) {
+		pci_read_config_dword(pci, where, &val32);
+		if (val32 == 0xffffffff) {
+			dev_dbg(priv->dev, "find_cap_offset invailid value %x.\n",
+				val32);
+			return 0;
+		}
+
+		if ((val32 & 0xff) == 0x10) {
+			dev_dbg(priv->dev, "pcie cap offset: %x\n", where);
+			return where;
+		}
+
+		if ((val32 & 0xff00) == 0x00) {
+			dev_dbg(priv->dev, "pci_find_cap_offset invailid value %x.\n",
+				val32);
+			break;
+		}
+		where = (int)((val32 >> 8) & 0xff);
+	}
+
+	return 0;
+}
+
+static void alcor_pci_init_check_aspm(struct alcor_pci_priv *priv)
+{
+	struct pci_dev *pci;
+	int where;
+	u32 val32;
+
+	priv->pdev_cap_off    = alcor_pci_find_cap_offset(priv, priv->pdev);
+	priv->parent_cap_off = alcor_pci_find_cap_offset(priv,
+							 priv->parent_pdev);
+
+	if ((priv->pdev_cap_off == 0) || (priv->parent_cap_off == 0)) {
+		dev_dbg(priv->dev, "pci_cap_off: %x, parent_cap_off: %x\n",
+			priv->pdev_cap_off, priv->parent_cap_off);
+		return;
+	}
+
+	/* link capability */
+	pci   = priv->pdev;
+	where = priv->pdev_cap_off + ALCOR_PCIE_LINK_CAP_OFFSET;
+	pci_read_config_dword(pci, where, &val32);
+	priv->pdev_aspm_cap = (u8)(val32 >> 10) & 0x03;
+
+	pci   = priv->parent_pdev;
+	where = priv->parent_cap_off + ALCOR_PCIE_LINK_CAP_OFFSET;
+	pci_read_config_dword(pci, where, &val32);
+	priv->parent_aspm_cap = (u8)(val32 >> 10) & 0x03;
+
+	if (priv->pdev_aspm_cap != priv->parent_aspm_cap) {
+		u8 aspm_cap;
+
+		dev_dbg(priv->dev, "pdev_aspm_cap: %x, parent_aspm_cap: %x\n",
+			priv->pdev_aspm_cap, priv->parent_aspm_cap);
+		aspm_cap = priv->pdev_aspm_cap & priv->parent_aspm_cap;
+		priv->pdev_aspm_cap    = aspm_cap;
+		priv->parent_aspm_cap = aspm_cap;
+	}
+
+	dev_dbg(priv->dev, "ext_config_dev_aspm: %x, pdev_aspm_cap: %x\n",
+		priv->ext_config_dev_aspm, priv->pdev_aspm_cap);
+	priv->ext_config_dev_aspm &= priv->pdev_aspm_cap;
+}
+
+static void alcor_pci_aspm_ctrl(struct alcor_pci_priv *priv, u8 aspm_enable)
+{
+	struct pci_dev *pci;
+	u8 aspm_ctrl, i;
+	int where;
+	u32 val32;
+
+	if ((!priv->pdev_cap_off) || (!priv->parent_cap_off)) {
+		dev_dbg(priv->dev, "pci_cap_off: %x, parent_cap_off: %x\n",
+			priv->pdev_cap_off, priv->parent_cap_off);
+		return;
+	}
+
+	if (!priv->pdev_aspm_cap)
+		return;
+
+	aspm_ctrl = 0;
+	if (aspm_enable) {
+		aspm_ctrl = priv->ext_config_dev_aspm;
+
+		if (!aspm_ctrl) {
+			dev_dbg(priv->dev, "aspm_ctrl == 0\n");
+			return;
+		}
+	}
+
+	for (i = 0; i < 2; i++) {
+
+		if (i) {
+			pci   = priv->parent_pdev;
+			where = priv->parent_cap_off
+				+ ALCOR_PCIE_LINK_CTRL_OFFSET;
+		} else {
+			pci   = priv->pdev;
+			where = priv->pdev_cap_off
+				+ ALCOR_PCIE_LINK_CTRL_OFFSET;
+		}
+
+		pci_read_config_dword(pci, where, &val32);
+		val32 &= (~0x03);
+		val32 |= (aspm_ctrl & priv->pdev_aspm_cap);
+		pci_write_config_byte(pci, where, (u8)val32);
+	}
+
+}
+
+static inline void alcor_mask_sd_irqs(struct alcor_pci_priv *priv)
+{
+	alcor_write32(priv, 0, AU6601_REG_INT_ENABLE);
+}
+
+static inline void alcor_unmask_sd_irqs(struct alcor_pci_priv *priv)
+{
+	alcor_write32(priv, AU6601_INT_CMD_MASK | AU6601_INT_DATA_MASK |
+		  AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE |
+		  AU6601_INT_OVER_CURRENT_ERR,
+		  AU6601_REG_INT_ENABLE);
+}
+
+static inline void alcor_mask_ms_irqs(struct alcor_pci_priv *priv)
+{
+	alcor_write32(priv, 0, AU6601_MS_INT_ENABLE);
+}
+
+static inline void alcor_unmask_ms_irqs(struct alcor_pci_priv *priv)
+{
+	alcor_write32(priv, 0x3d00fa, AU6601_MS_INT_ENABLE);
+}
+
+static int alcor_pci_probe(struct pci_dev *pdev,
+			   const struct pci_device_id *ent)
+{
+	struct alcor_dev_cfg *cfg;
+	struct alcor_pci_priv *priv;
+	int ret, i, bar = 0;
+
+	cfg = (void *)ent->driver_data;
+
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	ret = ida_simple_get(&alcor_pci_idr, 0, 0, GFP_KERNEL);
+	if (ret < 0)
+		return ret;
+	priv->id = ret;
+
+	priv->pdev = pdev;
+	priv->parent_pdev = pdev->bus->self;
+	priv->dev = &pdev->dev;
+	priv->cfg = cfg;
+	priv->irq = pdev->irq;
+
+	ret = pci_request_regions(pdev, DRV_NAME_ALCOR_PCI);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot request region\n");
+		return -ENOMEM;
+	}
+
+	if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
+		dev_err(&pdev->dev, "BAR %d is not iomem. Aborting.\n", bar);
+		ret = -ENODEV;
+		goto error_release_regions;
+	}
+
+	priv->iobase = pcim_iomap(pdev, bar, 0);
+	if (!priv->iobase) {
+		ret = -ENOMEM;
+		goto error_release_regions;
+	}
+
+	/* make sure irqs are disabled */
+	alcor_write32(priv, 0, AU6601_REG_INT_ENABLE);
+	alcor_write32(priv, 0, AU6601_MS_INT_ENABLE);
+
+	ret = dma_set_mask_and_coherent(priv->dev, AU6601_SDMA_MASK);
+	if (ret) {
+		dev_err(priv->dev, "Failed to set DMA mask\n");
+		goto error_release_regions;
+	}
+
+	pci_set_master(pdev);
+	pci_set_drvdata(pdev, priv);
+	alcor_pci_init_check_aspm(priv);
+
+	for (i = 0; i < ARRAY_SIZE(alcor_pci_cells); i++) {
+		alcor_pci_cells[i].platform_data = priv;
+		alcor_pci_cells[i].pdata_size = sizeof(*priv);
+	}
+	ret = mfd_add_devices(&pdev->dev, priv->id, alcor_pci_cells,
+			ARRAY_SIZE(alcor_pci_cells), NULL, 0, NULL);
+	if (ret < 0)
+		goto error_release_regions;
+
+	alcor_pci_aspm_ctrl(priv, 0);
+
+	return 0;
+
+error_release_regions:
+	pci_release_regions(pdev);
+	return ret;
+}
+
+static void alcor_pci_remove(struct pci_dev *pdev)
+{
+	struct alcor_pci_priv *priv;
+
+	priv = pci_get_drvdata(pdev);
+
+	alcor_pci_aspm_ctrl(priv, 1);
+
+	mfd_remove_devices(&pdev->dev);
+
+	ida_simple_remove(&alcor_pci_idr, priv->id);
+
+	pci_release_regions(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int alcor_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct alcor_pci_priv *priv = pci_get_drvdata(pdev);
+
+	alcor_pci_aspm_ctrl(priv, 1);
+	return 0;
+}
+
+static int alcor_resume(struct device *dev)
+{
+
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct alcor_pci_priv *priv = pci_get_drvdata(pdev);
+
+	alcor_pci_aspm_ctrl(priv, 0);
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(alcor_pci_pm_ops, alcor_suspend, alcor_resume);
+
+static struct pci_driver alcor_driver = {
+	.name	=	DRV_NAME_ALCOR_PCI,
+	.id_table =	pci_ids,
+	.probe	=	alcor_pci_probe,
+	.remove =	alcor_pci_remove,
+	.driver	=	{
+		.pm	= &alcor_pci_pm_ops
+	},
+};
+
+module_pci_driver(alcor_driver);
+
+MODULE_AUTHOR("Oleksij Rempel <linux@...pel-privat.de>");
+MODULE_DESCRIPTION("PCI driver for Alcor Micro AU6601 Secure Digital Host Controller Interface");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/alcor_pci.h b/include/linux/alcor_pci.h
new file mode 100644
index 000000000000..da973e8a2da8
--- /dev/null
+++ b/include/linux/alcor_pci.h
@@ -0,0 +1,286 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Oleksij Rempel <linux@...pel-privat.de>
+ *
+ * Driver for Alcor Micro AU6601 and AU6621 controllers
+ */
+
+#ifndef __ALCOR_PCI_H
+#define __ALCOR_PCI_H
+
+#define ALCOR_SD_CARD 0
+#define ALCOR_MS_CARD 1
+
+#define DRV_NAME_ALCOR_PCI_SDMMC		"alcor_sdmmc"
+#define DRV_NAME_ALCOR_PCI_MS			"alcor_ms"
+
+#define PCI_ID_ALCOR_MICRO			0x1AEA
+#define PCI_ID_AU6601				0x6601
+#define PCI_ID_AU6621				0x6621
+
+#define MHZ_TO_HZ(freq)				((freq) * 1000 * 1000)
+
+#define AU6601_BASE_CLOCK			31000000
+#define AU6601_MIN_CLOCK			150000
+#define AU6601_MAX_CLOCK			208000000
+#define AU6601_MAX_DMA_SEGMENTS			1
+#define AU6601_MAX_PIO_SEGMENTS			1
+#define AU6601_MAX_DMA_BLOCK_SIZE		0x1000
+#define AU6601_MAX_PIO_BLOCK_SIZE		0x200
+#define AU6601_MAX_DMA_BLOCKS			1
+#define AU6601_DMA_LOCAL_SEGMENTS		1
+
+/* registers spotter by reverse engineering but still
+ * with unknown functionality:
+ * 0x10 - ADMA phy address. AU6621 only?
+ * 0x51 - LED ctrl?
+ * 0x52 - unknown
+ * 0x61 - LED related? Always toggled BIT0
+ * 0x63 - Same as 0x61?
+ * 0x77 - unknown
+ */
+
+/* SDMA phy address. Higher then 0x0800.0000?
+ * The au6601 and au6621 have different DMA engines with different issues. One
+ * For example au6621 engine is triggered by addr change. No other interaction
+ * is needed. This means, if we get two buffers with same address, then engine
+ * will stall.
+ */
+#define AU6601_REG_SDMA_ADDR			0x00
+#define AU6601_SDMA_MASK			0xffffffff
+
+#define AU6601_DMA_BOUNDARY			0x05
+#define AU6621_DMA_PAGE_CNT			0x05
+/* PIO */
+#define AU6601_REG_BUFFER			0x08
+/* ADMA ctrl? AU6621 only. */
+#define AU6621_DMA_CTRL				0x0c
+#define AU6621_DMA_ENABLE			BIT(0)
+/* CMD index */
+#define AU6601_REG_CMD_OPCODE			0x23
+/* CMD parametr */
+#define AU6601_REG_CMD_ARG			0x24
+/* CMD response 4x4 Bytes */
+#define AU6601_REG_CMD_RSP0			0x30
+#define AU6601_REG_CMD_RSP1			0x34
+#define AU6601_REG_CMD_RSP2			0x38
+#define AU6601_REG_CMD_RSP3			0x3C
+/* default timeout set to 125: 125 * 40ms = 5 sec
+ * how exactly it is calculated?
+ */
+#define AU6601_TIME_OUT_CTRL			0x69
+/* Block size for SDMA or PIO */
+#define AU6601_REG_BLOCK_SIZE			0x6c
+/* Some power related reg, used together with AU6601_OUTPUT_ENABLE */
+#define AU6601_POWER_CONTROL			0x70
+
+/* PLL ctrl */
+#define AU6601_CLK_SELECT			0x72
+#define	AU6601_CLK_OVER_CLK			0x80
+#define	AU6601_CLK_384_MHZ			0x30
+#define	AU6601_CLK_125_MHZ			0x20
+#define	AU6601_CLK_48_MHZ			0x10
+#define	AU6601_CLK_EXT_PLL			0x04
+#define AU6601_CLK_X2_MODE			0x02
+#define AU6601_CLK_ENABLE			0x01
+#define AU6601_CLK_31_25_MHZ			0x00
+
+#define AU6601_CLK_DIVIDER			0x73
+
+#define AU6601_INTERFACE_MODE_CTRL		0x74
+#define AU6601_DLINK_MODE			0x80
+#define	AU6601_INTERRUPT_DELAY_TIME		0x40
+#define	AU6601_SIGNAL_REQ_CTRL			0x30
+#define AU6601_MS_CARD_WP			BIT(3)
+#define AU6601_SD_CARD_WP			BIT(0)
+
+/* same register values are used for:
+ *  - AU6601_OUTPUT_ENABLE
+ *  - AU6601_POWER_CONTROL
+ */
+#define AU6601_ACTIVE_CTRL			0x75
+#define AU6601_XD_CARD				BIT(4)
+/* AU6601_MS_CARD_ACTIVE - will cativate MS card section? */
+#define AU6601_MS_CARD				BIT(3)
+#define AU6601_SD_CARD				BIT(0)
+
+/* card slot state. It should automatically detect type of
+ * the card
+ */
+#define AU6601_DETECT_STATUS			0x76
+#define AU6601_DETECT_EN			BIT(7)
+#define AU6601_MS_DETECTED			BIT(3)
+#define AU6601_SD_DETECTED			BIT(0)
+#define AU6601_DETECT_STATUS_M			0xf
+
+#define AU6601_REG_SW_RESET			0x79
+#define AU6601_BUF_CTRL_RESET			BIT(7)
+#define AU6601_RESET_DATA			BIT(3)
+#define AU6601_RESET_CMD			BIT(0)
+
+#define AU6601_OUTPUT_ENABLE			0x7a
+
+#define AU6601_PAD_DRIVE0			0x7b
+#define AU6601_PAD_DRIVE1			0x7c
+#define AU6601_PAD_DRIVE2			0x7d
+/* read EEPROM? */
+#define AU6601_FUNCTION				0x7f
+
+#define AU6601_CMD_XFER_CTRL			0x81
+#define	AU6601_CMD_17_BYTE_CRC			0xc0
+#define	AU6601_CMD_6_BYTE_WO_CRC		0x80
+#define	AU6601_CMD_6_BYTE_CRC			0x40
+#define	AU6601_CMD_START_XFER			0x20
+#define	AU6601_CMD_STOP_WAIT_RDY		0x10
+#define	AU6601_CMD_NO_RESP			0x00
+
+#define AU6601_REG_BUS_CTRL			0x82
+#define AU6601_BUS_WIDTH_4BIT			0x20
+#define AU6601_BUS_WIDTH_8BIT			0x10
+#define AU6601_BUS_WIDTH_1BIT			0x00
+
+#define AU6601_DATA_XFER_CTRL			0x83
+#define AU6601_DATA_WRITE			BIT(7)
+#define AU6601_DATA_DMA_MODE			BIT(6)
+#define AU6601_DATA_START_XFER			BIT(0)
+
+#define AU6601_DATA_PIN_STATE			0x84
+#define AU6601_BUS_STAT_CMD			BIT(15)
+/* BIT(4) - BIT(7) are permanently 1.
+ * May be reserved or not attached DAT4-DAT7
+ */
+#define AU6601_BUS_STAT_DAT3			BIT(3)
+#define AU6601_BUS_STAT_DAT2			BIT(2)
+#define AU6601_BUS_STAT_DAT1			BIT(1)
+#define AU6601_BUS_STAT_DAT0			BIT(0)
+#define AU6601_BUS_STAT_DAT_MASK		0xf
+
+#define AU6601_OPT				0x85
+#define	AU6601_OPT_CMD_LINE_LEVEL		0x80
+#define	AU6601_OPT_NCRC_16_CLK			BIT(4)
+#define	AU6601_OPT_CMD_NWT			BIT(3)
+#define	AU6601_OPT_STOP_CLK			BIT(2)
+#define	AU6601_OPT_DDR_MODE			BIT(1)
+#define	AU6601_OPT_SD_18V			BIT(0)
+
+#define AU6601_CLK_DELAY			0x86
+#define	AU6601_CLK_DATA_POSITIVE_EDGE		0x80
+#define	AU6601_CLK_CMD_POSITIVE_EDGE		0x40
+#define	AU6601_CLK_POSITIVE_EDGE_ALL		(AU6601_CLK_CMD_POSITIVE_EDGE \
+						| AU6601_CLK_DATA_POSITIVE_EDGE)
+
+
+#define AU6601_REG_INT_STATUS			0x90
+#define AU6601_REG_INT_ENABLE			0x94
+#define AU6601_INT_DATA_END_BIT_ERR		BIT(22)
+#define AU6601_INT_DATA_CRC_ERR			BIT(21)
+#define AU6601_INT_DATA_TIMEOUT_ERR		BIT(20)
+#define AU6601_INT_CMD_INDEX_ERR		BIT(19)
+#define AU6601_INT_CMD_END_BIT_ERR		BIT(18)
+#define AU6601_INT_CMD_CRC_ERR			BIT(17)
+#define AU6601_INT_CMD_TIMEOUT_ERR		BIT(16)
+#define AU6601_INT_ERROR			BIT(15)
+#define AU6601_INT_OVER_CURRENT_ERR		BIT(8)
+#define AU6601_INT_CARD_INSERT			BIT(7)
+#define AU6601_INT_CARD_REMOVE			BIT(6)
+#define AU6601_INT_READ_BUF_RDY			BIT(5)
+#define AU6601_INT_WRITE_BUF_RDY		BIT(4)
+#define AU6601_INT_DMA_END			BIT(3)
+#define AU6601_INT_DATA_END			BIT(1)
+#define AU6601_INT_CMD_END			BIT(0)
+
+#define AU6601_INT_NORMAL_MASK			0x00007FFF
+#define AU6601_INT_ERROR_MASK			0xFFFF8000
+
+#define AU6601_INT_CMD_MASK	(AU6601_INT_CMD_END | \
+		AU6601_INT_CMD_TIMEOUT_ERR | AU6601_INT_CMD_CRC_ERR | \
+		AU6601_INT_CMD_END_BIT_ERR | AU6601_INT_CMD_INDEX_ERR)
+#define AU6601_INT_DATA_MASK	(AU6601_INT_DATA_END | AU6601_INT_DMA_END | \
+		AU6601_INT_READ_BUF_RDY | AU6601_INT_WRITE_BUF_RDY | \
+		AU6601_INT_DATA_TIMEOUT_ERR | AU6601_INT_DATA_CRC_ERR | \
+		AU6601_INT_DATA_END_BIT_ERR)
+#define AU6601_INT_ALL_MASK			((u32)-1)
+
+/* MS_CARD mode registers */
+
+#define AU6601_MS_STATUS			0xa0
+
+#define AU6601_MS_BUS_MODE_CTRL			0xa1
+#define AU6601_MS_BUS_8BIT_MODE			0x03
+#define AU6601_MS_BUS_4BIT_MODE			0x01
+#define AU6601_MS_BUS_1BIT_MODE			0x00
+
+#define AU6601_MS_TPC_CMD			0xa2
+#define AU6601_MS_TPC_READ_PAGE_DATA		0x02
+#define AU6601_MS_TPC_READ_REG			0x04
+#define AU6601_MS_TPC_GET_INT			0x07
+#define AU6601_MS_TPC_WRITE_PAGE_DATA		0x0D
+#define AU6601_MS_TPC_WRITE_REG			0x0B
+#define AU6601_MS_TPC_SET_RW_REG_ADRS		0x08
+#define AU6601_MS_TPC_SET_CMD			0x0E
+#define AU6601_MS_TPC_EX_SET_CMD		0x09
+#define AU6601_MS_TPC_READ_SHORT_DATA		0x03
+#define AU6601_MS_TPC_WRITE_SHORT_DATA		0x0C
+
+#define AU6601_MS_TRANSFER_MODE			0xa3
+#define	AU6601_MS_XFER_INT_TIMEOUT_CHK		BIT(2)
+#define	AU6601_MS_XFER_DMA_ENABLE		BIT(1)
+#define	AU6601_MS_XFER_START			BIT(0)
+
+#define AU6601_MS_DATA_PIN_STATE		0xa4
+
+#define AU6601_MS_INT_STATUS			0xb0
+#define AU6601_MS_INT_ENABLE			0xb4
+#define AU6601_MS_INT_OVER_CURRENT_ERROR	BIT(23)
+#define AU6601_MS_INT_DATA_CRC_ERROR		BIT(21)
+#define AU6601_MS_INT_INT_TIMEOUT		BIT(20)
+#define AU6601_MS_INT_INT_RESP_ERROR		BIT(19)
+#define AU6601_MS_INT_CED_ERROR			BIT(18)
+#define AU6601_MS_INT_TPC_TIMEOUT		BIT(16)
+#define AU6601_MS_INT_ERROR			BIT(15)
+#define AU6601_MS_INT_CARD_INSERT		BIT(7)
+#define AU6601_MS_INT_CARD_REMOVE		BIT(6)
+#define AU6601_MS_INT_BUF_READ_RDY		BIT(5)
+#define AU6601_MS_INT_BUF_WRITE_RDY		BIT(4)
+#define AU6601_MS_INT_DMA_END			BIT(3)
+#define AU6601_MS_INT_TPC_END			BIT(1)
+
+#define AU6601_MS_INT_DATA_MASK			0x00000038
+#define AU6601_MS_INT_TPC_MASK			0x003d8002
+#define AU6601_MS_INT_TPC_ERROR			0x003d0000
+
+#define ALCOR_PCIE_LINK_CTRL_OFFSET		0x10
+#define ALCOR_PCIE_LINK_CAP_OFFSET		0x0c
+#define ALCOR_CAP_START_OFFSET			0x34
+
+struct alcor_dev_cfg {
+	u8	dma;
+};
+
+struct alcor_pci_priv {
+	struct pci_dev *pdev;
+	struct pci_dev *parent_pdev;
+	struct  device *dev;
+	void __iomem *iobase;
+	unsigned int irq;
+
+	unsigned long id; /* idr id */
+
+	struct alcor_dev_cfg	*cfg;
+
+	/* PCI ASPM related vars */
+	int pdev_cap_off;
+	u8  pdev_aspm_cap;
+	int parent_cap_off;
+	u8  parent_aspm_cap;
+	u8 ext_config_dev_aspm;
+};
+
+void alcor_write8(struct alcor_pci_priv *priv, u8 val, unsigned int addr);
+void alcor_write16(struct alcor_pci_priv *priv, u16 val, unsigned int addr);
+void alcor_write32(struct alcor_pci_priv *priv, u32 val, unsigned int addr);
+void alcor_write32be(struct alcor_pci_priv *priv, u32 val, unsigned int addr);
+u8 alcor_read8(struct alcor_pci_priv *priv, unsigned int addr);
+u32 alcor_read32(struct alcor_pci_priv *priv, unsigned int addr);
+u32 alcor_read32be(struct alcor_pci_priv *priv, unsigned int addr);
+#endif
-- 
2.17.1

Powered by blists - more mailing lists