linux-kernel - [PATCH v2 13/14] ARM: dts: sun8i: r40: Add RTC device node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181203145825.20511-14-wens@csie.org>
Date:   Mon,  3 Dec 2018 22:58:24 +0800
From:   Chen-Yu Tsai <wens@...e.org>
To:     Maxime Ripard <maxime.ripard@...tlin.com>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Alessandro Zummo <a.zummo@...ertech.it>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>
Cc:     Chen-Yu Tsai <wens@...e.org>, linux-arm-kernel@...ts.infradead.org,
        linux-rtc@...r.kernel.org, linux-clk@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-sunxi@...glegroups.com,
        Corentin Labbe <clabbe.montjoie@...il.com>
Subject: [PATCH v2 13/14] ARM: dts: sun8i: r40: Add RTC device node

The R40 has an RTC hardware block, which has additional registers
that are not related to RTC or clock functions, and is otherwise
compatible with the H3's RTC.

Add a device node for it, and fix up any references to the LOSC.

Acked-by: Maxime Ripard <maxime.ripard@...tlin.com>
Tested-by: Corentin Labbe <clabbe.montjoie@...il.com>
Signed-off-by: Chen-Yu Tsai <wens@...e.org>
---
 arch/arm/boot/dts/sun8i-r40.dtsi | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index a8917f8b1c80..89762dbefe42 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -70,7 +70,7 @@
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
 			clock-accuracy = <20000>;
-			clock-output-names = "osc32k";
+			clock-output-names = "ext-osc32k";
 		};
 	};
 
@@ -315,17 +315,27 @@
 		ccu: clock@...0000 {
 			compatible = "allwinner,sun8i-r40-ccu";
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&osc32k>;
+			clocks = <&osc24M>, <&rtc 0>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
 
+		rtc: rtc@...0400 {
+			compatible = "allwinner,sun8i-r40-rtc",
+				     "allwinner,sun8i-h3-rtc";
+			reg = <0x01c20400 0x400>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out";
+			clocks = <&osc32k>;
+			#clock-cells = <1>;
+		};
+
 		pio: pinctrl@...0800 {
 			compatible = "allwinner,sun8i-r40-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
-- 
2.20.0.rc1