[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181204161645.8038-3-hch@lst.de>
Date: Tue, 4 Dec 2018 08:16:42 -0800
From: Christoph Hellwig <hch@....de>
To: Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>,
Tony Luck <tony.luck@...el.com>
Cc: Fenghua Yu <fenghua.yu@...el.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Robin Murphy <robin.murphy@....com>,
linux-ia64@...r.kernel.org, iommu@...ts.linux-foundation.org,
x86@...nel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 2/5] swiotlb: remove dma_mark_clean
Instead of providing a special dma_mark_clean hook just for ia64, switch
ia64 to use the normal arch_sync_dma_for_cpu hooks instead.
This means that we now also set the PG_arch_1 bit for pages in the
swiotlb buffer, which isn't stricly needed as we will never execute code
out of the swiotlb buffer, but otherwise harmless.
Signed-off-by: Christoph Hellwig <hch@....de>
---
arch/ia64/Kconfig | 3 ++-
arch/ia64/kernel/dma-mapping.c | 20 +++++++++++++++++++-
arch/ia64/mm/init.c | 18 +++++++-----------
drivers/xen/swiotlb-xen.c | 20 +-------------------
include/linux/dma-direct.h | 8 --------
kernel/dma/swiotlb.c | 18 +-----------------
6 files changed, 30 insertions(+), 57 deletions(-)
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 36773def6920..39724df0de29 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -28,8 +28,9 @@ config IA64
select HAVE_ARCH_TRACEHOOK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_VIRT_CPU_ACCOUNTING
- select ARCH_HAS_DMA_MARK_CLEAN
+ select ARCH_HAS_DMA_COHERENT_TO_PFN
select ARCH_HAS_SG_CHAIN
+ select ARCH_HAS_SYNC_DMA_FOR_CPU
select VIRT_TO_BUS
select ARCH_DISCARD_MEMBLOCK
select GENERIC_IRQ_PROBE
diff --git a/arch/ia64/kernel/dma-mapping.c b/arch/ia64/kernel/dma-mapping.c
index 7a471d8d67d4..36dd6aa6d759 100644
--- a/arch/ia64/kernel/dma-mapping.c
+++ b/arch/ia64/kernel/dma-mapping.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
-#include <linux/dma-mapping.h>
+#include <linux/dma-direct.h>
#include <linux/swiotlb.h>
#include <linux/export.h>
@@ -16,6 +16,24 @@ const struct dma_map_ops *dma_get_ops(struct device *dev)
EXPORT_SYMBOL(dma_get_ops);
#ifdef CONFIG_SWIOTLB
+void *arch_dma_alloc(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
+{
+ return dma_direct_alloc_pages(dev, size, dma_handle, gfp, attrs);
+}
+
+void arch_dma_free(struct device *dev, size_t size, void *cpu_addr,
+ dma_addr_t dma_addr, unsigned long attrs)
+{
+ dma_direct_free_pages(dev, size, cpu_addr, dma_addr, attrs);
+}
+
+long arch_dma_coherent_to_pfn(struct device *dev, void *cpu_addr,
+ dma_addr_t dma_addr)
+{
+ return page_to_pfn(virt_to_page(cpu_addr));
+}
+
void __init swiotlb_dma_init(void)
{
dma_ops = &swiotlb_dma_ops;
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index d5e12ff1d73c..2c51733f1dfd 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -71,18 +71,14 @@ __ia64_sync_icache_dcache (pte_t pte)
* DMA can be marked as "clean" so that lazy_mmu_prot_update() doesn't have to
* flush them when they get mapped into an executable vm-area.
*/
-void
-dma_mark_clean(void *addr, size_t size)
+void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
+ size_t size, enum dma_data_direction dir)
{
- unsigned long pg_addr, end;
-
- pg_addr = PAGE_ALIGN((unsigned long) addr);
- end = (unsigned long) addr + size;
- while (pg_addr + PAGE_SIZE <= end) {
- struct page *page = virt_to_page(pg_addr);
- set_bit(PG_arch_1, &page->flags);
- pg_addr += PAGE_SIZE;
- }
+ unsigned long pfn = __phys_to_pfn(paddr);
+
+ do {
+ set_bit(PG_arch_1, &pfn_to_page(pfn)->flags);
+ } while (++pfn <= __phys_to_pfn(paddr + size - 1));
}
inline void
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 833e80b46eb2..989cf872b98c 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -441,21 +441,8 @@ static void xen_unmap_single(struct device *hwdev, dma_addr_t dev_addr,
xen_dma_unmap_page(hwdev, dev_addr, size, dir, attrs);
/* NOTE: We use dev_addr here, not paddr! */
- if (is_xen_swiotlb_buffer(dev_addr)) {
+ if (is_xen_swiotlb_buffer(dev_addr))
swiotlb_tbl_unmap_single(hwdev, paddr, size, dir, attrs);
- return;
- }
-
- if (dir != DMA_FROM_DEVICE)
- return;
-
- /*
- * phys_to_virt doesn't work with hihgmem page but we could
- * call dma_mark_clean() with hihgmem page here. However, we
- * are fine since dma_mark_clean() is null on POWERPC. We can
- * make dma_mark_clean() take a physical address if necessary.
- */
- dma_mark_clean(phys_to_virt(paddr), size);
}
static void xen_swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
@@ -493,11 +480,6 @@ xen_swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
if (target == SYNC_FOR_DEVICE)
xen_dma_sync_single_for_device(hwdev, dev_addr, size, dir);
-
- if (dir != DMA_FROM_DEVICE)
- return;
-
- dma_mark_clean(phys_to_virt(paddr), size);
}
void
diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
index 6e5a47ae7d64..1aa73f4907ae 100644
--- a/include/linux/dma-direct.h
+++ b/include/linux/dma-direct.h
@@ -48,14 +48,6 @@ static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
return __sme_clr(__dma_to_phys(dev, daddr));
}
-#ifdef CONFIG_ARCH_HAS_DMA_MARK_CLEAN
-void dma_mark_clean(void *addr, size_t size);
-#else
-static inline void dma_mark_clean(void *addr, size_t size)
-{
-}
-#endif /* CONFIG_ARCH_HAS_DMA_MARK_CLEAN */
-
u64 dma_direct_get_required_mask(struct device *dev);
void *dma_direct_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
gfp_t gfp, unsigned long attrs);
diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
index 19ba8e473d71..2e126bac5d7d 100644
--- a/kernel/dma/swiotlb.c
+++ b/kernel/dma/swiotlb.c
@@ -706,21 +706,8 @@ void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
(attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
arch_sync_dma_for_cpu(hwdev, paddr, size, dir);
- if (is_swiotlb_buffer(paddr)) {
+ if (is_swiotlb_buffer(paddr))
swiotlb_tbl_unmap_single(hwdev, paddr, size, dir, attrs);
- return;
- }
-
- if (dir != DMA_FROM_DEVICE)
- return;
-
- /*
- * phys_to_virt doesn't work with hihgmem page but we could
- * call dma_mark_clean() with hihgmem page here. However, we
- * are fine since dma_mark_clean() is null on POWERPC. We can
- * make dma_mark_clean() take a physical address if necessary.
- */
- dma_mark_clean(phys_to_virt(paddr), size);
}
/*
@@ -750,9 +737,6 @@ swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
if (!dev_is_dma_coherent(hwdev) && target == SYNC_FOR_DEVICE)
arch_sync_dma_for_device(hwdev, paddr, size, dir);
-
- if (!is_swiotlb_buffer(paddr) && dir == DMA_FROM_DEVICE)
- dma_mark_clean(phys_to_virt(paddr), size);
}
void
--
2.19.1
Powered by blists - more mailing lists