linux-kernel - [PATCH v3 0/3] add support for MCP16502 PMIC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1543917126-32572-1-git-send-email-andrei.stefanescu@microchip.com>
Date:   Tue, 4 Dec 2018 09:52:24 +0000
From:   <Andrei.Stefanescu@...rochip.com>
To:     <lgirdwood@...il.com>, <robh+dt@...nel.org>,
        <mark.rutland@....com>, <gregkh@...uxfoundation.org>,
        <Nicolas.Ferre@...rochip.com>, <Cristian.Birsan@...rochip.com>,
        <Claudiu.Beznea@...rochip.com>
CC:     <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <Andrei.Stefanescu@...rochip.com>
Subject: [PATCH v3 0/3] add support for MCP16502 PMIC

MCP16502 is a Power Management IC from Microchip.
It has 4 Buck outputs and 2 LDOs. The buck regulators
can be used in two modes: normal(FPWM) and low-power(Auto PFM).

This patch series adds support for the MCP16502 PMIC.

v3:
- use CONFIG_SUSPEND and CONFIG_PM to fix compile errors for some configs

v2:
- use lpm-gpios instead of lpm-gpio in devicetree bindings documentation
- describe the regulators present on the PMIC in the devicetree bindings
  documentation
- add SPDX license inside a C++ comment
- prefix macro
- remove mcp16502_update_regulator and mcp16502_read
- replace ?: with if-else
- change some if-else with switch statements for legibility
- use regmap helpers for regultor settings during runtime
- make mcp16502_get_status read the status from the PMIC STS registers
- use module_i2c_driver
- use the PMIC's Hibernate registers for suspend-to-mem, the PMIC's
  Low-power registers for standby and the PMIC's Active registers for
  normal runtime

Note about mcp16502_suspend:
- mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_HIB) has now been changed to
  mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_LPM) for legibility.

Note that the function call only sets the LPM pin of the PMIC to high.
This puts the PMIC in Low-power operating mode. Hibernate operating mode
is reached when the MPU sets the PWRHLD line to zero (typically when
entering suspend-to-ram).

Andrei Stefanescu (3):
  regulator: dt-bindings: add MCP16502 regulator bindings
  MAINTAINERS: add maintainer for MCP16502 PMIC driver
  regulator: mcp16502: add regulator driver for MCP16502

 .../bindings/regulator/mcp16502-regulator.txt      | 143 ++++++
 MAINTAINERS                                        |   7 +
 drivers/regulator/Kconfig                          |   9 +
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/mcp16502.c                       | 555 +++++++++++++++++++++
 5 files changed, 715 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
 create mode 100644 drivers/regulator/mcp16502.c

-- 
2.7.4