lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20181204103729.177459344@linuxfoundation.org>
Date:   Tue,  4 Dec 2018 11:49:04 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Sasha Levin <sashal@...nel.org>
Subject: [PATCH 4.14 058/146] Revert "wlcore: Add missing PM call for wlcore_cmd_wait_for_event_or_timeout()"

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

This reverts commit e87efc44dd36ba3db59847c418354711ebad779b which was
upstream commit 4ec7cece87b3ed21ffcd407c62fb2f151a366bc1.

>>From Dietmar May's report on the stable mailing list
(https://www.spinics.net/lists/stable/msg272201.html):

> I've run into some problems which appear due to (a) recent patch(es) on
> the wlcore wifi driver.
>
> 4.4.160 - commit 3fdd34643ffc378b5924941fad40352c04610294
> 4.9.131 - commit afeeecc764436f31d4447575bb9007732333818c
>
> Earlier versions (4.9.130 and 4.4.159 - tested back to 4.4.49) do not
> exhibit this problem. It is still present in 4.9.141.
>
> master as of 4.20.0-rc4 does not exhibit this problem.
>
> Basically, during client association when in AP mode (running hostapd),
> handshake may or may not complete following a noticeable delay. If
> successful, then the driver fails consistently in warn_slowpath_null
> during disassociation. If unsuccessful, the wifi client attempts multiple
> times, sometimes failing repeatedly. I've had clients unable to connect
> for 3-5 minutes during testing, with the syslog filled with dozens of
> backtraces. syslog details are below.
>
> I'm working on an embedded device with a TI 3352 ARM processor and a
> murata wl1271 module in sdio mode. We're running a fully patched ubuntu
> 18.04 ARM build, with a kernel built from kernel.org's stable/linux repo <https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-4.9.y&id=afeeecc764436f31d4447575bb9007732333818c>.
> Relevant parts of the kernel config are included below.
>
> The commit message states:
>
> > /I've only seen this few times with the runtime PM patches enabled so
> > this one is probably not needed before that. This seems to work
> > currently based on the current PM implementation timer. Let's apply
> > this separately though in case others are hitting this issue./
> We're not doing anything explicit with power management. The device is an
> IoT edge gateway with battery backup, normally running on wall power. The
> battery is currently used solely to shut down the system cleanly to avoid
> filesystem corruption.
>
> The device tree is configured to keep power in suspend; but the device
> should never suspend, so in our case, there is no need to call
> wl1271_ps_elp_wakeup() or wl1271_ps_elp_sleep(), as occurs in the patch.

Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/net/wireless/ti/wlcore/cmd.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
index f48c3f62966d..761cf8573a80 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -35,7 +35,6 @@
 #include "wl12xx_80211.h"
 #include "cmd.h"
 #include "event.h"
-#include "ps.h"
 #include "tx.h"
 #include "hw_ops.h"
 
@@ -192,10 +191,6 @@ int wlcore_cmd_wait_for_event_or_timeout(struct wl1271 *wl,
 
 	timeout_time = jiffies + msecs_to_jiffies(WL1271_EVENT_TIMEOUT);
 
-	ret = wl1271_ps_elp_wakeup(wl);
-	if (ret < 0)
-		return ret;
-
 	do {
 		if (time_after(jiffies, timeout_time)) {
 			wl1271_debug(DEBUG_CMD, "timeout waiting for event %d",
@@ -227,7 +222,6 @@ int wlcore_cmd_wait_for_event_or_timeout(struct wl1271 *wl,
 	} while (!event);
 
 out:
-	wl1271_ps_elp_sleep(wl);
 	kfree(events_vector);
 	return ret;
 }
-- 
2.17.1



Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ