| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 5 Dec 2018 15:23:36 +0100
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Aaro Koskinen <aaro.koskinen@....fi>
Cc: Tony Lindgren <tony@...mide.com>, ladis@...ux-mips.org,
balrogg@...il.com,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-omap <linux-omap@...r.kernel.org>
Subject: Re: [PATCH v2] MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5910/OMAP310
On Tue, 20 Nov 2018 at 00:14, Aaro Koskinen <aaro.koskinen@....fi> wrote:
>
> Since v2.6.22 or so there has been reports [1] about OMAP MMC being
> broken on OMAP15XX based hardware (OMAP5910 and OMAP310). The breakage
> seems to have been caused by commit 46a6730e3ff9 ("mmc-omap: Fix
> omap to use MMC_POWER_ON") that changed clock enabling to be done
> on MMC_POWER_ON. This can happen multiple times in a row, and on 15XX
> the hardware doesn't seem to like it and the MMC just stops responding.
> Fix by memorizing the power mode and do the init only when necessary.
>
> Before the patch (on Palm TE):
>
> mmc0: new SD card at address b368
> mmcblk0: mmc0:b368 SDC 977 MiB
> mmci-omap mmci-omap.0: command timeout (CMD18)
> mmci-omap mmci-omap.0: command timeout (CMD13)
> mmci-omap mmci-omap.0: command timeout (CMD13)
> mmci-omap mmci-omap.0: command timeout (CMD12) [x 6]
> mmci-omap mmci-omap.0: command timeout (CMD13) [x 6]
> mmcblk0: error -110 requesting status
> mmci-omap mmci-omap.0: command timeout (CMD8)
> mmci-omap mmci-omap.0: command timeout (CMD18)
> mmci-omap mmci-omap.0: command timeout (CMD13)
> mmci-omap mmci-omap.0: command timeout (CMD13)
> mmci-omap mmci-omap.0: command timeout (CMD12) [x 6]
> mmci-omap mmci-omap.0: command timeout (CMD13) [x 6]
> mmcblk0: error -110 requesting status
> mmcblk0: recovery failed!
> print_req_error: I/O error, dev mmcblk0, sector 0
> Buffer I/O error on dev mmcblk0, logical block 0, async page read
> mmcblk0: unable to read partition table
>
> After the patch:
>
> mmc0: new SD card at address b368
> mmcblk0: mmc0:b368 SDC 977 MiB
> mmcblk0: p1
>
> The patch is based on a fix and analysis done by Ladislav Michl.
>
> Tested on OMAP15XX/OMAP310 (Palm TE), OMAP1710 (Nokia 770)
> and OMAP2420 (Nokia N810).
>
> [1] https://marc.info/?t=123175197000003&r=1&w=2
>
> Fixes: 46a6730e3ff9 ("mmc-omap: Fix omap to use MMC_POWER_ON")
> Reported-by: Ladislav Michl <ladis@...ux-mips.org>
> Reported-by: Andrzej Zaborowski <balrogg@...il.com>
> Tested-by: Ladislav Michl <ladis@...ux-mips.org>
> Acked-by: Tony Lindgren <tony@...mide.com>
> Signed-off-by: Aaro Koskinen <aaro.koskinen@....fi>
Applied for fixes and by adding a stable tag, thanks!
Kind regards
Uffe
> ---
>
> v2: Corrected commit message: OMAP5912 => OMAP5910
> Added Tested-by and Acked-by tags.
>
> v1: https://marc.info/?t=154258870700045&r=1&w=2
>
> drivers/mmc/host/omap.c | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
> index adf32682f27a..c60a7625b1fa 100644
> --- a/drivers/mmc/host/omap.c
> +++ b/drivers/mmc/host/omap.c
> @@ -104,6 +104,7 @@ struct mmc_omap_slot {
> unsigned int vdd;
> u16 saved_con;
> u16 bus_mode;
> + u16 power_mode;
> unsigned int fclk_freq;
>
> struct tasklet_struct cover_tasklet;
> @@ -1157,7 +1158,7 @@ static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> struct mmc_omap_slot *slot = mmc_priv(mmc);
> struct mmc_omap_host *host = slot->host;
> int i, dsor;
> - int clk_enabled;
> + int clk_enabled, init_stream;
>
> mmc_omap_select_slot(slot, 0);
>
> @@ -1167,6 +1168,7 @@ static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> slot->vdd = ios->vdd;
>
> clk_enabled = 0;
> + init_stream = 0;
> switch (ios->power_mode) {
> case MMC_POWER_OFF:
> mmc_omap_set_power(slot, 0, ios->vdd);
> @@ -1174,13 +1176,17 @@ static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> case MMC_POWER_UP:
> /* Cannot touch dsor yet, just power up MMC */
> mmc_omap_set_power(slot, 1, ios->vdd);
> + slot->power_mode = ios->power_mode;
> goto exit;
> case MMC_POWER_ON:
> mmc_omap_fclk_enable(host, 1);
> clk_enabled = 1;
> dsor |= 1 << 11;
> + if (slot->power_mode != MMC_POWER_ON)
> + init_stream = 1;
> break;
> }
> + slot->power_mode = ios->power_mode;
>
> if (slot->bus_mode != ios->bus_mode) {
> if (slot->pdata->set_bus_mode != NULL)
> @@ -1196,7 +1202,7 @@ static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> for (i = 0; i < 2; i++)
> OMAP_MMC_WRITE(host, CON, dsor);
> slot->saved_con = dsor;
> - if (ios->power_mode == MMC_POWER_ON) {
> + if (init_stream) {
> /* worst case at 400kHz, 80 cycles makes 200 microsecs */
> int usecs = 250;
>
> @@ -1234,6 +1240,7 @@ static int mmc_omap_new_slot(struct mmc_omap_host *host, int id)
> slot->host = host;
> slot->mmc = mmc;
> slot->id = id;
> + slot->power_mode = MMC_POWER_UNDEFINED;
> slot->pdata = &host->pdata->slots[id];
>
> host->slots[id] = slot;
> --
> 2.17.0
>
Powered by blists - more mailing lists