[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <52d598c9-8e72-c30b-edc8-bb16e29b425a@xilinx.com>
Date: Wed, 5 Dec 2018 15:42:42 +0100
From: Michal Simek <michal.simek@...inx.com>
To: Naga Sureshkumar Relli <naga.sureshkumar.relli@...inx.com>,
<mmayer@...adcom.com>, <f.fainelli@...il.com>,
<ladis@...ux-mips.org>, <treding@...dia.com>, <digetx@...il.com>,
<d-gerlach@...com>
CC: <linus.walleij@...aro.org>, <michal.simek@...inx.com>,
<linux-kernel@...r.kernel.org>
Subject: Re: [LINUX PATCH v12 1/2] dt-bindings: memory: Add pl353 smc
controller devicetree binding information
On 29. 11. 18 13:57, Naga Sureshkumar Relli wrote:
> Add pl353 static memory controller devicetree binding information.
>
> Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@...inx.com>
> Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
> ---
> .../bindings/memory-controllers/pl353-smc.txt | 47 ++++++++++++++++++++++
> 1 file changed, 47 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
> new file mode 100644
> index 0000000..d56615f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
> @@ -0,0 +1,47 @@
> +Device tree bindings for ARM PL353 static memory controller
> +
> +PL353 static memory controller supports two kinds of memory
> +interfaces.i.e NAND and SRAM/NOR interfaces.
> +The actual devices are instantiated from the child nodes of pl353 smc node.
> +
> +Required properties:
> +- compatible : Should be "arm,pl353-smc-r2p1", "arm,primecell".
> +- reg : Controller registers map and length.
> +- clock-names : List of input clock names - "memclk", "apb_pclk"
> + (See clock bindings for details).
> +- clocks : Clock phandles (see clock bindings for details).
> +- address-cells : Must be 2.
> +- size-cells : Must be 1.
> +
> +Child nodes:
> + For NAND the "arm,pl353-nand-r2p1" and for NOR the "cfi-flash" drivers are
> +supported as child nodes.
> +
> +for NAND partition information please refer the below file
> +Documentation/devicetree/bindings/mtd/partition.txt
> +
> +Example:
> + smcc: memory-controller@...0e000
> + compatible = "arm,pl353-smc-r2p1", "arm,primecell";
> + clock-names = "memclk", "apb_pclk";
> + clocks = <&clkc 11>, <&clkc 44>;
> + reg = <0xe000e000 0x1000>;
> + #address-cells = <2>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0xe1000000 0x1000000 //Nand CS Region
> + 0x1 0x0 0xe2000000 0x2000000 //SRAM/NOR CS Region
> + 0x2 0x0 0xe4000000 0x2000000>; //SRAM/NOR CS Region
> + nand_0: flash@...00000 {
> + compatible = "arm,pl353-nand-r2p1"
> + reg = <0 0 0x1000000>;
> + (...)
> + };
> + nor0: flash@...00000 {
> + compatible = "cfi-flash";
> + reg = <1 0 0x2000000>;
> + };
> + nor1: flash@...00000 {
> + compatible = "cfi-flash";
> + reg = <2 0 0x2000000>;
> + };
> + };
>
v11 was sent long time ago and also reviewed by Linus here
https://lore.kernel.org/patchwork/patch/961603/
I can't see changelog which you have in v11. And also recorded changes
if any.
Then this driver will go through arm-soc tree via me.
Thanks,
Michal
Powered by blists - more mailing lists