linux-kernel - [PATCH v2 2/4] Input: goodix - Add ADVV28-supply regulator support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20181205235220.3461-2-jagan@amarulasolutions.com>
Date:   Thu,  6 Dec 2018 05:22:18 +0530
From:   Jagan Teki <jagan@...rulasolutions.com>
To:     Dmitry Torokhov <dmitry.torokhov@...il.com>,
        Chen-Yu Tsai <wens@...e.org>, linux-input@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Michael Trimarchi <michael@...rulasolutions.com>,
        linux-amarula@...rulasolutions.com
Cc:     Jagan Teki <jagan@...rulasolutions.com>
Subject: [PATCH v2 2/4] Input: goodix - Add ADVV28-supply regulator support

Goodix CTP controllers have AVDD28 pin connected to voltage
regulator which may not be turned on by default, like for GT5663.

Add support for such ctp used boards by adding voltage regulator
handling code to goodix ctp driver.

Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
---
Changes for v2:
- disable regulator in remove
- fix to setup regulator in probe code

 drivers/input/touchscreen/goodix.c | 33 +++++++++++++++++++++++++-----
 1 file changed, 28 insertions(+), 5 deletions(-)

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index f2d9c2c41885..7371f6946098 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -27,6 +27,7 @@
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/acpi.h>
 #include <linux/of.h>
@@ -47,6 +48,7 @@ struct goodix_ts_data {
 	struct touchscreen_properties prop;
 	unsigned int max_touch_num;
 	unsigned int int_trigger_type;
+	struct regulator *avdd28;
 	struct gpio_desc *gpiod_int;
 	struct gpio_desc *gpiod_rst;
 	u16 id;
@@ -786,25 +788,41 @@ static int goodix_ts_probe(struct i2c_client *client,
 	if (error)
 		return error;
 
+	ts->avdd28 = devm_regulator_get(&client->dev, "AVDD28");
+	if (IS_ERR(ts->avdd28)) {
+		error = PTR_ERR(ts->avdd28);
+		if (error != -EPROBE_DEFER)
+			dev_err(&client->dev,
+				"Failed to get AVDD28 regulator: %d\n", error);
+		return error;
+	}
+
+	/* power the controller */
+	error = regulator_enable(ts->avdd28);
+	if (error) {
+		dev_err(&client->dev, "Controller fail to enable AVDD28\n");
+		return error;
+	}
+
 	if (ts->gpiod_int && ts->gpiod_rst) {
 		/* reset the controller */
 		error = goodix_reset(ts);
 		if (error) {
 			dev_err(&client->dev, "Controller reset failed.\n");
-			return error;
+			goto error;
 		}
 	}
 
 	error = goodix_i2c_test(client);
 	if (error) {
 		dev_err(&client->dev, "I2C communication failure: %d\n", error);
-		return error;
+		goto error;
 	}
 
 	error = goodix_read_version(ts);
 	if (error) {
 		dev_err(&client->dev, "Read version failed.\n");
-		return error;
+		goto error;
 	}
 
 	ts->chip = goodix_get_chip_data(ts->id);
@@ -823,23 +841,28 @@ static int goodix_ts_probe(struct i2c_client *client,
 			dev_err(&client->dev,
 				"Failed to invoke firmware loader: %d\n",
 				error);
-			return error;
+			goto error;
 		}
 
 		return 0;
 	} else {
 		error = goodix_configure_dev(ts);
 		if (error)
-			return error;
+			goto error;
 	}
 
 	return 0;
+
+error:
+	regulator_disable(ts->avdd28);
+	return error;
 }
 
 static int goodix_ts_remove(struct i2c_client *client)
 {
 	struct goodix_ts_data *ts = i2c_get_clientdata(client);
 
+	regulator_disable(ts->avdd28);
 	if (ts->gpiod_int && ts->gpiod_rst)
 		wait_for_completion(&ts->firmware_loading_complete);
 
-- 
2.18.0.321.gffc6fa0e3