[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <edf44a24633ecaf59a7d5bea1f4acffdd0ae01a3.camel@bootlin.com>
Date: Wed, 05 Dec 2018 10:48:07 +0100
From: Paul Kocialkowski <paul.kocialkowski@...tlin.com>
To: Chen-Yu Tsai <wens@...e.org>
Cc: Linux Media Mailing List <linux-media@...r.kernel.org>,
devicetree <devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
devel@...verdev.osuosl.org,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Maxime Ripard <maxime.ripard@...tlin.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
linux-sunxi <linux-sunxi@...glegroups.com>,
Hans Verkuil <hverkuil@...all.nl>,
Sakari Ailus <sakari.ailus@...ux.intel.com>
Subject: Re: [PATCH v2 07/15] arm64: dts: allwinner: h5: Add system-control
node with SRAM C1
Hi,
On Wed, 2018-12-05 at 17:45 +0800, Chen-Yu Tsai wrote:
> On Wed, Dec 5, 2018 at 5:25 PM Paul Kocialkowski
> <paul.kocialkowski@...tlin.com> wrote:
> > Add the H5-specific system control node description to its device-tree
> > with support for the SRAM C1 section, that will be used by the video
> > codec node later on.
> >
> > The CPU-side SRAM address was obtained empirically while the size was
> > taken from the documentation. They may not be entirely accurate.
> >
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@...tlin.com>
> > ---
> > arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 22 ++++++++++++++++++++
> > 1 file changed, 22 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
> > index b41dc1aab67d..42bfb560b367 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
> > @@ -94,6 +94,28 @@
> > };
> >
> > soc {
> > + system-control@...0000 {
> > + compatible = "allwinner,sun50i-h5-system-control";
> > + reg = <0x01c00000 0x1000>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > +
> > + sram_c1: sram@...0000 {
> > + compatible = "mmio-sram";
> > + reg = <0x00018000 0x1c000>;
>
> 0x1d00000 or 0x18000?
For the H5, I found the VE SRAM area to be mapped to 0x18000 on the CPU
side (when testing with devmem), unlike the A64, H3 and others. I was
rather surprised about this as well!
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0 0x00018000 0x1c000>;
>
> Same here.
>
> > +
> > + ve_sram: sram-section@0 {
> > + compatible = "allwinner,sun50i-h5-sram-c1",
> > + "allwinner,sun4i-a10-sram-c1";
> > + reg = <0x000000 0x1c000>;
> > + };
> > + };
> > + };
> > +
> > mali: gpu@...0000 {
> > compatible = "allwinner,sun50i-h5-mali", "arm,mali-450";
> > reg = <0x01e80000 0x30000>;
> > --
> > 2.19.2
Cheers,
Paul
--
Paul Kocialkowski, Bootlin (formerly Free Electrons)
Embedded Linux and kernel engineering
https://bootlin.com
Powered by blists - more mailing lists