| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20181205011059.GA17845@ming.t460p>
Date: Wed, 5 Dec 2018 09:10:59 +0800
From: Ming Lei <ming.lei@...hat.com>
To: Evan Green <evgreen@...omium.org>
Cc: axboe@...nel.dk, Gwendal Grignou <gwendal@...omium.org>,
asavery@...omium.org, linux-block@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] loop: Better discard support for block devices
On Tue, Dec 04, 2018 at 02:19:46PM -0800, Evan Green wrote:
> Hi Ming,
>
> On Tue, Nov 27, 2018 at 5:26 PM Ming Lei <ming.lei@...hat.com> wrote:
> >
> > On Tue, Oct 30, 2018 at 04:06:24PM -0700, Evan Green wrote:
> > > If the backing device for a loop device is a block device,
> > > then mirror the discard properties of the underlying block
> > > device into the loop device. While in there, differentiate
> > > between REQ_OP_DISCARD and REQ_OP_WRITE_ZEROES, which are
> > > different for block devices, but which the loop device had
> > > just been lumping together.
> > >
> > > Signed-off-by: Evan Green <evgreen@...omium.org>
> > > ---
> > >
> > > drivers/block/loop.c | 61 +++++++++++++++++++++++++++++++++++-----------------
> > > 1 file changed, 41 insertions(+), 20 deletions(-)
> > >
> > > diff --git a/drivers/block/loop.c b/drivers/block/loop.c
> > > index 28990fc94841a..176e65101c4ef 100644
> > > --- a/drivers/block/loop.c
> > > +++ b/drivers/block/loop.c
> > > @@ -417,19 +417,14 @@ static int lo_read_transfer(struct loop_device *lo, struct request *rq,
> > > return ret;
> > > }
> > >
> > > -static int lo_discard(struct loop_device *lo, struct request *rq, loff_t pos)
> > > +static int lo_discard(struct loop_device *lo, struct request *rq,
> > > + int mode, loff_t pos)
> > > {
> > > - /*
> > > - * We use punch hole to reclaim the free space used by the
> > > - * image a.k.a. discard. However we do not support discard if
> > > - * encryption is enabled, because it may give an attacker
> > > - * useful information.
> > > - */
> > > struct file *file = lo->lo_backing_file;
> > > - int mode = FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE;
> > > + struct request_queue *q = lo->lo_queue;
> > > int ret;
> > >
> > > - if ((!file->f_op->fallocate) || lo->lo_encrypt_key_size) {
> > > + if (!blk_queue_discard(q)) {
> > > ret = -EOPNOTSUPP;
> > > goto out;
> > > }
> > > @@ -603,8 +598,13 @@ static int do_req_filebacked(struct loop_device *lo, struct request *rq)
> > > case REQ_OP_FLUSH:
> > > return lo_req_flush(lo, rq);
> > > case REQ_OP_DISCARD:
> > > + return lo_discard(lo, rq,
> > > + FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE, pos);
> > > +
> > > case REQ_OP_WRITE_ZEROES:
> > > - return lo_discard(lo, rq, pos);
> > > + return lo_discard(lo, rq,
> > > + FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE, pos);
> > > +
> > > case REQ_OP_WRITE:
> > > if (lo->transfer)
> > > return lo_write_transfer(lo, rq, pos);
> > > @@ -859,6 +859,25 @@ static void loop_config_discard(struct loop_device *lo)
> > > struct file *file = lo->lo_backing_file;
> > > struct inode *inode = file->f_mapping->host;
> > > struct request_queue *q = lo->lo_queue;
> > > + struct request_queue *backingq;
> > > +
> > > + /*
> > > + * If the backing device is a block device, mirror its discard
> > > + * capabilities.
> > > + */
> > > + if (S_ISBLK(inode->i_mode)) {
> > > + backingq = bdev_get_queue(inode->i_bdev);
> > > + blk_queue_max_discard_sectors(q,
> > > + backingq->limits.max_discard_sectors);
> > > +
> > > + blk_queue_max_write_zeroes_sectors(q,
> > > + backingq->limits.max_write_zeroes_sectors);
> > > +
> > > + q->limits.discard_granularity =
> > > + backingq->limits.discard_granularity;
> > > +
> > > + q->limits.discard_alignment =
> > > + backingq->limits.discard_alignment;
> >
> > I think it isn't necessary to mirror backing queue's discard/write_zeros
> > capabilities, given either fs of the underlying queue can deal with well.
> >
> > >
> > > /*
> > > * We use punch hole to reclaim the free space used by the
> > > @@ -866,22 +885,24 @@ static void loop_config_discard(struct loop_device *lo)
> > > * encryption is enabled, because it may give an attacker
> > > * useful information.
> > > */
> > > - if ((!file->f_op->fallocate) ||
> > > - lo->lo_encrypt_key_size) {
> > > + } else if ((!file->f_op->fallocate) || lo->lo_encrypt_key_size) {
> > > q->limits.discard_granularity = 0;
> > > q->limits.discard_alignment = 0;
> > > blk_queue_max_discard_sectors(q, 0);
> > > blk_queue_max_write_zeroes_sectors(q, 0);
> > > - blk_queue_flag_clear(QUEUE_FLAG_DISCARD, q);
> > > - return;
> > > - }
> > >
> > > - q->limits.discard_granularity = inode->i_sb->s_blocksize;
> > > - q->limits.discard_alignment = 0;
> > > + } else {
> > > + q->limits.discard_granularity = inode->i_sb->s_blocksize;
> > > + q->limits.discard_alignment = 0;
> > > +
> > > + blk_queue_max_discard_sectors(q, UINT_MAX >> 9);
> > > + blk_queue_max_write_zeroes_sectors(q, UINT_MAX >> 9);
> > > + }
> > >
> > > - blk_queue_max_discard_sectors(q, UINT_MAX >> 9);
> > > - blk_queue_max_write_zeroes_sectors(q, UINT_MAX >> 9);
> > > - blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
> > > + if (q->limits.max_discard_sectors || q->limits.max_write_zeroes_sectors)
> > > + blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
> > > + else
> > > + blk_queue_flag_clear(QUEUE_FLAG_DISCARD, q);
> > > }
> >
> > Looks it should work just by mirroring backing queue's discard
> > capability to loop queue in case that the loop is backed by
> > block device, doesn't it? Meantime the unified discard limits &
> > write_zeros limits can be kept.
>
> I tested this out, and you're right that I could just flip the
> QUEUE_FLAG_DISCARD based on whether its a block device, and leave
What I meant actually is to do the following discard config:
bool discard;
if (S_ISBLK(inode->i_mode)) {
struct request_queue *backingq = bdev_get_queue(inode->i_bdev);
discard = blk_queue_discard(backingq);
} else if ((!file->f_op->fallocate) || lo->lo_encrypt_key_size)
discard = false;
else
discard = true;
if (discard) {
blk_queue_max_discard_sectors(q, UINT_MAX >> 9);
blk_queue_max_write_zeroes_sectors(q, UINT_MAX >> 9);
blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
} else {
blk_queue_flag_clear(QUEUE_FLAG_DISCARD, q);
}
> everything else alone, to completely disable discard support for loop
> devices backed by block devices. This seems to work for programs like
> mkfs.ext4, but still leaves problems for coreutils cp.
>
> But is that really the right call? With this change, we're not only
> able to use loop devices in this way, but we're able to use the
> discard and zero functionality of the underlying block device by
> simply passing it through. To me that seemed better than disabling all
> discard support for block devices, which would severely slow us down
> on some devices.
I guess the above approach can do the same job with yours, but simpler.
thanks,
Ming
Powered by blists - more mailing lists