| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20181206100905.15053-4-otavio@ossystems.com.br>
Date: Thu, 6 Dec 2018 08:08:59 -0200
From: Otavio Salvador <otavio@...ystems.com.br>
To: linux-arm-kernel@...ts.infradead.org
Cc: Fabio Estevam <festevam@...il.com>,
Otavio Salvador <otavio@...ystems.com.br>,
Fabio Estevam <fabio.estevam@....com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Mark Rutland <mark.rutland@....com>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>,
NXP Linux Team <linux-imx@....com>
Subject: [PATCH v2 3/9] ARM: dts: imx7d-pico-pi: Move SoM related part to imx7d-pico.dtsi
From: Fabio Estevam <festevam@...il.com>
imx7d-pico-pi board contains:
- One SoM board (imx7d pico)
- One base board (pi).
In order to make it easier for adding support for other board variants,
move the commom SoM part to the imx7d-pico.dtsi file.
Signed-off-by: Fabio Estevam <festevam@...il.com>
Signed-off-by: Otavio Salvador <otavio@...ystems.com.br>
---
Changes in v2: None
arch/arm/boot/dts/imx7d-pico-pi.dts | 116 ++--------------------------
arch/arm/boot/dts/imx7d-pico.dtsi | 111 +++++++++++++++++++++++++-
2 files changed, 113 insertions(+), 114 deletions(-)
diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts
index 33951f4c7f41..039c17066fe0 100644
--- a/arch/arm/boot/dts/imx7d-pico-pi.dts
+++ b/arch/arm/boot/dts/imx7d-pico-pi.dts
@@ -5,6 +5,9 @@
#include "imx7d-pico.dtsi"
/ {
+ model = "TechNexion PICO-IMX7D Board and PI baseboard";
+ compatible = "technexion,imx7d-pico-pi", "fsl,imx7d";
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "imx7-sgtl5000";
@@ -16,43 +19,14 @@
};
dailink_master: simple-audio-card,codec {
- sound-dai = <&codec>;
+ sound-dai = <&sgtl5000>;
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
};
};
};
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet1>;
- assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
- <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
- assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
- assigned-clock-rates = <0>, <100000000>;
- phy-mode = "rgmii";
- phy-handle = <ðphy0>;
- fsl,magic-packet;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- status = "okay";
- };
- };
-};
-
&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
-
- codec: sgtl5000@a {
+ sgtl5000: codec@a {
#sound-dai-cells = <0>;
reg = <0x0a>;
compatible = "fsl,sgtl5000";
@@ -61,83 +35,3 @@
VDDIO-supply = <®_vref_1v8>;
};
};
-
-
-&sai1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sai1>;
- assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
- <&clks IMX7D_SAI1_ROOT_CLK>;
- assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
- assigned-clock-rates = <0>, <24576000>;
- status = "okay";
-};
-
-&uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart5>;
- assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
- assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
- status = "okay";
-};
-
-&usbotg1 {
- vbus-supply = <®_usb_otg1_vbus>;
- status = "okay";
-};
-
-&usbotg2 {
- vbus-supply = <®_usb_otg2_vbus>;
- dr_mode = "host";
- status = "okay";
-};
-
-&iomuxc {
- pinctrl_enet1: enet1grp {
- fsl,pins = <
- MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3
- MX7D_PAD_SD2_WP__ENET1_MDC 0x3
- MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
- MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
- MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
- MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
- MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
- MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
- MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
- MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
- MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
- MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
- MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
- MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x4000007f
- MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x4000007f
- >;
- };
-
- pinctrl_sai1: sai1grp {
- fsl,pins = <
- MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
- MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f
- MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30
- MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f
- >;
- };
-
- pinctrl_uart5: uart5grp {
- fsl,pins = <
- MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79
- MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79
- >;
- };
-
- pinctrl_usbotg1_pwr: usbotg_pwr {
- fsl,pins = <
- MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14
- >;
- };
-};
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index d957454ce16b..7319e2ecec5c 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -7,9 +7,6 @@
#include "imx7d.dtsi"
/ {
- model = "Technexion Pico i.MX7D Board";
- compatible = "technexion,imx7d-pico", "fsl,imx7d";
-
/* Will be filled by the bootloader */
memory@...00000 {
device_type = "memory";
@@ -79,6 +76,37 @@
assigned-clock-rates = <0>, <32768>;
};
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ status = "okay";
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
@@ -174,6 +202,35 @@
};
};
+&sai1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai1>;
+ assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+ <&clks IMX7D_SAI1_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+ assigned-clock-rates = <0>, <24576000>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ dr_mode = "host";
+ status = "okay";
+};
+
&usdhc2 { /* Wifi SDIO */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_wifi_clk>;
@@ -208,6 +265,32 @@
};
&iomuxc {
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x4000007f
+ MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3
+ MX7D_PAD_SD2_WP__ENET1_MDC 0x3
+ MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
+ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
+ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
+ MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
+ MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
+ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
+ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
+ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
+ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
+ MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
+ >;
+ };
+
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f
@@ -221,6 +304,28 @@
>;
};
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
+ MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f
+ MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30
+ MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79
+ MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79
+ >;
+ };
+
+ pinctrl_usbotg1_pwr: usbotg_pwr {
+ fsl,pins = <
+ MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14
+ >;
+ };
+
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX7D_PAD_SD2_CMD__SD2_CMD 0x59
--
2.19.2
Powered by blists - more mailing lists