linux-kernel - [PATCH V2 3/4] ARM: dts: imx6qdl-sabresd: add magnetometer sensor support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1544060203-22163-3-git-send-email-Anson.Huang@nxp.com>
Date:   Thu, 6 Dec 2018 01:42:38 +0000
From:   Anson Huang <anson.huang@....com>
To:     "shawnguo@...nel.org" <shawnguo@...nel.org>,
        "s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
        "kernel@...gutronix.de" <kernel@...gutronix.de>,
        Fabio Estevam <fabio.estevam@....com>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "mark.rutland@....com" <mark.rutland@....com>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC:     dl-linux-imx <linux-imx@....com>
Subject: [PATCH V2 3/4] ARM: dts: imx6qdl-sabresd: add magnetometer sensor
 support

Add magnetometer sensor mag3110 support on i2c3 bus.

Signed-off-by: Anson Huang <Anson.Huang@....com>
Reviewed-by: Fabio Estevam <festevam@...il.com>
---
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index d07c250..b8a2fd8 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -423,6 +423,15 @@
 		wakeup-gpios = <&gpio6 7 0>;
 	};
 
+	magnetometer@e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+	};
+
 	light-sensor@44 {
 		compatible = "isil,isl29023";
 		reg = <0x44>;
@@ -538,6 +547,12 @@
 			>;
 		};
 
+		pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D16__GPIO3_IO16		0xb0b1
+			>;
+		};
+
 		pinctrl_ipu1_csi0: ipu1csi0grp {
 			fsl,pins = <
 				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
-- 
2.7.4