[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1544143992-16385-1-git-send-email-hayashi.kunihiko@socionext.com>
Date: Fri, 7 Dec 2018 09:53:10 +0900
From: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Masahiro Yamada <yamada.masahiro@...ionext.com>
Cc: linux-pci@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Masami Hiramatsu <masami.hiramatsu@...aro.org>,
Jassi Brar <jaswinder.singh@...aro.org>,
Gustavo Pimentel <gustavo.pimentel@...opsys.com>,
Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
Subject: [PATCH v5 0/2] Add new UniPhier PCIe host driver
This series adds PCIe host controller driver for Socionext UniPhier SoCs.
This controller is based on the DesignWare PCIe core. This driver
supports LD20 and PXs3 SoCs.
v4: https://www.spinics.net/lists/linux-pci/msg78278.html
About legacy IRQ, it might be necessary to share common view from
keystone driver that have been cleaned up[1].
[1] https://lore.kernel.org/patchwork/patch/989541/
Changes since v4:
- fix an issue of using the wrong value to mask IRQ mask register
Changes since v3:
- dt-bindings: fix INTX numbering of legacy interrupt map
- change interrupts to level ones
- remove .xlate function
- merge uniphier_pcie_ltssm_disable() into uniphier_pcie_ltssm_enable()
- remove an error message on uniphier_pcie_establish_link()
- change the order between irq_domain_add_liniear() and
irq_set_chained_handler_and_data()
- replace dummy_irq_chip with uniphier_pcie_irq_chip and its functions
- add dependency on CONFIG_HAS_IOMEM
- MAINTAINERS: add pcie-uniphier entry
Changes since v2:
- dt-bindings: remove a comment that the node name isn't important
- dt-bindings: remove "intx" interrupt
- dt-bindings: define 'legacy-interrupt-controller' node and its properties
- return an error value when link up fails
- remove devm_request_irq() and a handler for MSI IRQ
- use chained interrupt instead of devm_request_irq() for legacy IRQ
- add unipher_pcie_config_legacy_irq() to get legacy IRQ from
'legacy-interrupt controller' node
- replace 4 statments to handle INTX with for_each_set_bit()
- remove initialization of pp->root_bus_nr
- remove indivisual interrupt enable bit definitions
- rename 'irq_domain' member to 'legacy_irq_domain' in private structure
- use pci_irqd_intx_xlate() for irq_domain_ops.xlate function
Changes since v1:
- follow capitalization conventions in the descriptions
- use C style comments except for the SPDX line
Kunihiko Hayashi (2):
dt-bindings: PCI: Add UniPhier PCIe host controller description
PCI: uniphier: Add UniPhier PCIe host controller support
.../devicetree/bindings/pci/uniphier-pcie.txt | 81 ++++
MAINTAINERS | 7 +
drivers/pci/controller/dwc/Kconfig | 10 +
drivers/pci/controller/dwc/Makefile | 1 +
drivers/pci/controller/dwc/pcie-uniphier.c | 471 +++++++++++++++++++++
5 files changed, 570 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/uniphier-pcie.txt
create mode 100644 drivers/pci/controller/dwc/pcie-uniphier.c
--
2.7.4
Powered by blists - more mailing lists