| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 07 Dec 2018 12:57:00 +0100
From: "Rafael J. Wysocki" <rjw@...ysocki.net>
To: Linux PM <linux-pm@...r.kernel.org>,
Doug Smythies <dsmythies@...us.net>
Cc: LKML <linux-kernel@...r.kernel.org>,
Linux Documentation <linux-doc@...r.kernel.org>,
Peter Zijlstra <peterz@...radead.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Giovanni Gherdovich <ggherdovich@...e.cz>
Subject: [PATCH] cpuidle: Add 'above' and 'below' idle state metrics
From: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
Subject: [PATCH] cpuidle: Add 'above' and 'below' idle state metrics
Add two new metrics for CPU idle states, "above" and "below", to count
the number of times the given state had been asked for (or entered
from the kernel's perspective), but the observed idle duration turned
out to be too short or too long for it (respectively).
These mertics help to estimate the quality of the CPU idle governor
in use.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
---
This is a replacement for https://patchwork.kernel.org/patch/10714995/ with
the metrics renamed and some documentation confusion cleaned up. Thanks!
---
Documentation/ABI/testing/sysfs-devices-system-cpu | 7 ++++
Documentation/admin-guide/pm/cpuidle.rst | 10 ++++++
drivers/cpuidle/cpuidle.c | 31 ++++++++++++++++++++-
drivers/cpuidle/sysfs.c | 6 ++++
include/linux/cpuidle.h | 2 +
5 files changed, 55 insertions(+), 1 deletion(-)
Index: linux-pm/drivers/cpuidle/cpuidle.c
===================================================================
--- linux-pm.orig/drivers/cpuidle/cpuidle.c
+++ linux-pm/drivers/cpuidle/cpuidle.c
@@ -202,7 +202,6 @@ int cpuidle_enter_state(struct cpuidle_d
struct cpuidle_state *target_state = &drv->states[index];
bool broadcast = !!(target_state->flags & CPUIDLE_FLAG_TIMER_STOP);
ktime_t time_start, time_end;
- s64 diff;
/*
* Tell the time framework to switch to a broadcast timer because our
@@ -248,6 +247,9 @@ int cpuidle_enter_state(struct cpuidle_d
local_irq_enable();
if (entered_state >= 0) {
+ s64 diff, delay = drv->states[entered_state].exit_latency;
+ int i;
+
/*
* Update cpuidle counters
* This can be moved to within driver enter routine,
@@ -260,6 +262,33 @@ int cpuidle_enter_state(struct cpuidle_d
dev->last_residency = (int)diff;
dev->states_usage[entered_state].time += dev->last_residency;
dev->states_usage[entered_state].usage++;
+
+ if (diff < drv->states[entered_state].target_residency) {
+ for (i = entered_state - 1; i >= 0; i--) {
+ if (drv->states[i].disabled ||
+ dev->states_usage[i].disable)
+ continue;
+
+ /* Shallower states are enabled, so update. */
+ dev->states_usage[entered_state].above++;
+ break;
+ }
+ } else if (diff > delay) {
+ for (i = entered_state + 1; i < drv->state_count; i++) {
+ if (drv->states[i].disabled ||
+ dev->states_usage[i].disable)
+ continue;
+
+ /*
+ * Update if a deeper state would have been a
+ * better match for the observed idle duration.
+ */
+ if (diff - delay >= drv->states[i].target_residency)
+ dev->states_usage[entered_state].below++;
+
+ break;
+ }
+ }
} else {
dev->last_residency = 0;
}
Index: linux-pm/include/linux/cpuidle.h
===================================================================
--- linux-pm.orig/include/linux/cpuidle.h
+++ linux-pm/include/linux/cpuidle.h
@@ -33,6 +33,8 @@ struct cpuidle_state_usage {
unsigned long long disable;
unsigned long long usage;
unsigned long long time; /* in US */
+ unsigned long long above; /* Number of times it's been too deep */
+ unsigned long long below; /* Number of times it's been too shallow */
#ifdef CONFIG_SUSPEND
unsigned long long s2idle_usage;
unsigned long long s2idle_time; /* in US */
Index: linux-pm/drivers/cpuidle/sysfs.c
===================================================================
--- linux-pm.orig/drivers/cpuidle/sysfs.c
+++ linux-pm/drivers/cpuidle/sysfs.c
@@ -301,6 +301,8 @@ define_show_state_str_function(name)
define_show_state_str_function(desc)
define_show_state_ull_function(disable)
define_store_state_ull_function(disable)
+define_show_state_ull_function(above)
+define_show_state_ull_function(below)
define_one_state_ro(name, show_state_name);
define_one_state_ro(desc, show_state_desc);
@@ -310,6 +312,8 @@ define_one_state_ro(power, show_state_po
define_one_state_ro(usage, show_state_usage);
define_one_state_ro(time, show_state_time);
define_one_state_rw(disable, show_state_disable, store_state_disable);
+define_one_state_ro(above, show_state_above);
+define_one_state_ro(below, show_state_below);
static struct attribute *cpuidle_state_default_attrs[] = {
&attr_name.attr,
@@ -320,6 +324,8 @@ static struct attribute *cpuidle_state_d
&attr_usage.attr,
&attr_time.attr,
&attr_disable.attr,
+ &attr_above.attr,
+ &attr_below.attr,
NULL
};
Index: linux-pm/Documentation/admin-guide/pm/cpuidle.rst
===================================================================
--- linux-pm.orig/Documentation/admin-guide/pm/cpuidle.rst
+++ linux-pm/Documentation/admin-guide/pm/cpuidle.rst
@@ -398,6 +398,16 @@ deeper the (effective) idle state repres
a number of files (attributes) representing the properties of the idle state
object corresponding to it, as follows:
+``above``
+ Total number of times this idle state had been asked for, but the
+ observed idle duration was certainly too short to match its target
+ residency.
+
+``below``
+ Total number of times this idle state had been asked for, but cerainly
+ a deeper idle state would have been a better match for the observed idle
+ duration.
+
``desc``
Description of the idle state.
Index: linux-pm/Documentation/ABI/testing/sysfs-devices-system-cpu
===================================================================
--- linux-pm.orig/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ linux-pm/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -145,6 +145,8 @@ What: /sys/devices/system/cpu/cpuX/cpui
/sys/devices/system/cpu/cpuX/cpuidle/stateN/power
/sys/devices/system/cpu/cpuX/cpuidle/stateN/time
/sys/devices/system/cpu/cpuX/cpuidle/stateN/usage
+ /sys/devices/system/cpu/cpuX/cpuidle/stateN/high
+ /sys/devices/system/cpu/cpuX/cpuidle/stateN/below
Date: September 2007
KernelVersion: v2.6.24
Contact: Linux power management list <linux-pm@...r.kernel.org>
@@ -166,6 +168,11 @@ Description:
usage: (RO) Number of times this state was entered (a count).
+ above: (RO) Number of times this state was entered, but the
+ observed CPU idle duration was too short for it (a count).
+
+ below: (RO) Number of times this state was entered, but the
+ observed CPU idle duration was too long for it (a count).
What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/desc
Date: February 2008
Powered by blists - more mailing lists