Message-ID: <377f610a-035b-a591-de9f-b926e2b4f9e1@arm.com>
Date:   Fri, 7 Dec 2018 13:17:55 +0000
From:   Robin Murphy <robin.murphy@....com>
To:     Dongli Zhang <dongli.zhang@...cle.com>,
        Joe Jin <joe.jin@...cle.com>, iommu@...ts.linux-foundation.org,
        linux-kernel@...r.kernel.org
Cc:     konrad.wilk@...cle.com, hch@....de, m.szyprowski@...sung.com
Subject: Re: [PATCH RFC 1/1] swiotlb: add debugfs to track swiotlb buffer
 usage

On 07/12/2018 05:49, Dongli Zhang wrote:
> 
> 
> On 12/07/2018 12:12 AM, Joe Jin wrote:
>> Hi Dongli,
>>
>> Maybe move d_swiotlb_usage declare into swiotlb_create_debugfs():
> 
> I assume the call of swiotlb_tbl_map_single() might be frequent in some
> situations, e.g., when 'swiotlb=force'.
> 
> That's why I declare the d_swiotlb_usage out of any functions and use "if
> (unlikely(!d_swiotlb_usage))".
> 
> I think "if (unlikely(!d_swiotlb_usage))" incur less performance overhead than
> calling swiotlb_create_debugfs() every time to confirm if debugfs is created. I
> would declare d_swiotlb_usage statically inside swiotlb_create_debugfs() if the
> performance overhead is acceptable (it is trivial indeed).
> 
> 
> That is the reason I tag the patch with RFC because I am not sure if the
> on-demand creation of debugfs is fine with maintainers/reviewers. If swiotlb
> pages are never allocated, we would not be able to see the debugfs entry.
> 
> I would prefer to limit the modification within swiotlb and to not taint any
> other files.
> 
> The drawback is there is no place to create or delete the debugfs entry because
> swiotlb buffer could be initialized and uninitialized at very early stage.

Couldn't you just do it from an initcall? All you really need to care 
about is ordering after debugfs_init(), which is easy. If SWIOTLB 
initialisation does end up being skipped at any point, nobody's going to 
mind if debugfs still has an entry saying io_tlb_nslabs == 0 (in fact, 
that's arguably useful in itself as positive confirmation that the 
system is not using SWIOTLB).

>> void swiotlb_create_debugfs(void)
>> {
>> #ifdef CONFIG_DEBUG_FS
>> 	static struct dentry *d_swiotlb_usage = NULL;
>>
>> 	if (d_swiotlb_usage)
>> 		return;
>>
>> 	d_swiotlb_usage = debugfs_create_dir("swiotlb", NULL);
>>
>> 	if (!d_swiotlb_usage)
>> 		return;
>>
>> 	debugfs_create_file("usage", 0600, d_swiotlb_usage,
>> 			    NULL, &swiotlb_usage_fops);

Maybe expose io_tlb_nslabs and io_tlb_used as separate entries? Then you 
could just use debugfs_create_ulong() to keep things really simple. That 
would also make the interface more consistent with dma-debug, which 
would be nice given how closely-related they are.

Robin.

>> #endif
>> }
>>
>> And for io_tlb_used, possible add a check at the begin of swiotlb_tbl_map_single(),
>> if there were not any free slots or not enough slots, return fail directly?
> 
> This would optimize the slots allocation path. I will follow this in next
> version after I got more suggestions and confirmations from maintainers.
> 
> 
> Thank you very much!
> 
> Dongli Zhang
> 
>>
>> Thanks,
>> Joe
>> On 12/5/18 7:59 PM, Dongli Zhang wrote:
>>> The device driver will not be able to do dma operations once swiotlb buffer
>>> is full, either because the driver is using so many IO TLB blocks inflight,
>>> or because there is memory leak issue in device driver. To export the
>>> swiotlb buffer usage via debugfs would help the user estimate the size of
>>> swiotlb buffer to pre-allocate or analyze device driver memory leak issue.
>>>
>>> As the swiotlb can be initialized at very early stage when debugfs cannot
>>> register successfully, this patch creates the debugfs entry on demand.
>>>
>>> Signed-off-by: Dongli Zhang <dongli.zhang@...cle.com>
>>> ---
>>>   kernel/dma/swiotlb.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>   1 file changed, 57 insertions(+)
>>>
>>> diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
>>> index 045930e..d3c8aa4 100644
>>> --- a/kernel/dma/swiotlb.c
>>> +++ b/kernel/dma/swiotlb.c
>>> @@ -35,6 +35,9 @@
>>>   #include <linux/scatterlist.h>
>>>   #include <linux/mem_encrypt.h>
>>>   #include <linux/set_memory.h>
>>> +#ifdef CONFIG_DEBUG_FS
>>> +#include <linux/debugfs.h>
>>> +#endif
>>>   
>>>   #include <asm/io.h>
>>>   #include <asm/dma.h>
>>> @@ -73,6 +76,13 @@ static phys_addr_t io_tlb_start, io_tlb_end;
>>>    */
>>>   static unsigned long io_tlb_nslabs;
>>>   
>>> +#ifdef CONFIG_DEBUG_FS
>>> +/*
>>> + * The number of used IO TLB block
>>> + */
>>> +static unsigned long io_tlb_used;
>>> +#endif
>>> +
>>>   /*
>>>    * This is a free list describing the number of free entries available from
>>>    * each index
>>> @@ -100,6 +110,41 @@ static DEFINE_SPINLOCK(io_tlb_lock);
>>>   
>>>   static int late_alloc;
>>>   
>>> +#ifdef CONFIG_DEBUG_FS
>>> +
>>> +static struct dentry *d_swiotlb_usage;
>>> +
>>> +static int swiotlb_usage_show(struct seq_file *m, void *v)
>>> +{
>>> +	seq_printf(m, "%lu\n%lu\n", io_tlb_used, );
>>> +	return 0;
>>> +}
>>> +
>>> +static int swiotlb_usage_open(struct inode *inode, struct file *filp)
>>> +{
>>> +	return single_open(filp, swiotlb_usage_show, NULL);
>>> +}
>>> +
>>> +static const struct file_operations swiotlb_usage_fops = {
>>> +	.open           = swiotlb_usage_open,
>>> +	.read           = seq_read,
>>> +	.llseek         = seq_lseek,
>>> +	.release        = single_release,
>>> +};
>>> +
>>> +void swiotlb_create_debugfs(void)
>>> +{
>>> +	d_swiotlb_usage = debugfs_create_dir("swiotlb", NULL);
>>> +
>>> +	if (!d_swiotlb_usage)
>>> +		return;
>>> +
>>> +	debugfs_create_file("usage", 0600, d_swiotlb_usage,
>>> +			    NULL, &swiotlb_usage_fops);
>>> +}
>>> +
>>> +#endif
>>> +
>>>   static int __init
>>>   setup_io_tlb_npages(char *str)
>>>   {
>>> @@ -449,6 +494,11 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
>>>   		pr_warn_once("%s is active and system is using DMA bounce buffers\n",
>>>   			     sme_active() ? "SME" : "SEV");
>>>   
>>> +#ifdef CONFIG_DEBUG_FS
>>> +	if (unlikely(!d_swiotlb_usage))
>>> +		swiotlb_create_debugfs();
>>> +#endif
>>> +
>>>   	mask = dma_get_seg_boundary(hwdev);
>>>   
>>>   	tbl_dma_addr &= mask;
>>> @@ -528,6 +578,9 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
>>>   		dev_warn(hwdev, "swiotlb buffer is full (sz: %zd bytes)\n", size);
>>>   	return SWIOTLB_MAP_ERROR;
>>>   found:
>>> +#ifdef CONFIG_DEBUG_FS
>>> +	io_tlb_used += nslots;
>>> +#endif
>>>   	spin_unlock_irqrestore(&io_tlb_lock, flags);
>>>   
>>>   	/*
>>> @@ -588,6 +641,10 @@ void swiotlb_tbl_unmap_single(struct device *hwdev, phys_addr_t tlb_addr,
>>>   		 */
>>>   		for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1) && io_tlb_list[i]; i--)
>>>   			io_tlb_list[i] = ++count;
>>> +
>>> +#ifdef CONFIG_DEBUG_FS
>>> +		io_tlb_used -= nslots;
>>> +#endif
>>>   	}
>>>   	spin_unlock_irqrestore(&io_tlb_lock, flags);
>>>   }
>>>
>>
>>

Powered by blists - more mailing lists